boring mills and machining centers used for sale

WALDRICH SIEGEN HFB-200 CNC Horizontal Boring & Mill MC Built 1978 / 2007 X=15.000, Y=5.000, Z=1.500, W=1.200mm Spindle diam. 200mm ISO 50+60, 90kW SIEMENS 840 D ATC 90 Table 5.200x5.200mm, X travel 3.300mm max. loading 100 Ton Rotation 360.000° Floorplates 6.000 x 10.000mm Hydrostatic Many heads This machine was used in final cutting and boring, drilling of big vessel engine cylinder blocks in STX Engine. It can be done the straight and inclined direction drilling &boring. It means the spindle head can be tilted. It is very high accuracy machine. This machine is in assembled condition but not under power

PAMA 200 CNC Floor Type Horizontal Boring & Milling machine Built 1997 / 2013 X=16.000, Y=6.000, Z=1.330, W=830mm Spindle diam. 200mm ISO 50/60 Spindle RPM: 1-680 75HP CNC FANUC 31i-M Table 5.000x5.000mm, X travel 2.500mm max. loading 120 Ton Rotation 360.000° Floorplates 4.000 x 15.000mm Chip conveyor Angle head This machine disassembled end of 2021. It was in a very good condition.

KARATS DH-30 CNC Deep Hole Borer Manufactured year 2017 Main specification ● Height from Bed sliding to center of Chuck 2,900 mm ● Swing over bed 5,800 mm ● Drilling capacity 56~650 mm dia ● Distance between center 25,500 mm ● Max. working length 24,000 mm ● Max. workpiece load capacity (with 2 Steady rest ) 380 tons ● Max. workpiece clamping dia 3,400 mm Bed ● Total length of Bed 53,850 mm ● Width of Bed 2,500 mm ● Height of Bed 700 mm Headstock ● Spindle shaft dia 800 mm ● Spindle rotating speed 160 rpm ● Chuck size 2,500 mm ● The clamping dia on Chuck 600 ~1,600 mm ( Design 480~1,680 mm ) Boring head ( A-axis) ● The feed for working 14,000 mm ● Max. feeding 25,870 mm ● Min. distance from Chuck 21,300 mm ● Max.. distance from Chuck 47,170  ...

GF Mikron 500U VMC, 2020- 5-Axis, HSK, Low Hours, Excellent Condition,Probe Year: 2020 X-axis- 19.68 in (500 mm) Y-axis – 17.71 in (450 mm) Z-axis – 15.74 in (400 mm) B-axis – 65°/+120° C-Axis- 360° endless Spindle drive type- Cartridge Spindle max.- 20,000 RPM Spindle Power at S1-30.8 HP (23kW) Spindle Power at S6-48.2 HP (36 kW) Spindle Torque at S6-88.5 ft. lbs. (120 Nm) Spindle tool interface- HSK-A63 Distance from table top to spindle 5.90 – 21.65 in (150 – 550 mm) Rapid traverse X,Y & Z 1,181 min (30 m/min) Acceleration X,Y & Z .3g (3 m/sq. sec.) Rapid speed B/C 32/112 RPM Tool changer capacity- 60 tools Work table size- 19.68 in (500 mm) Maximum payload on table 440 lbs (200 kg) Typical table height 38.58 in (980 mm) Number of T-slots 7 T-slot spacing- 2.48″ in (63 mm) T-slot dimension- 0.55 in (14 mm) Coolant tank capacity- 158 gal (600 L)  ...

Mitsubishi MAF 240/180B CNC Floor Type HBM, New 1980 (Recontrolled in 1999) Condition: Very Good Type of CNC Control: Gidding & Lewis 8000B CNC Control - Recontrolled 1999 Spindle Diameter: 7.08"(180mm) Milling spindle diameter: 9.44"(240mm) Vertical Head Travel, Y-Axis: 169"(4300mm) Horizontal Column Travel, X-Axis: 1200" (30500mm) Headstock Travel, Z-1 Axis: 47.24"(1200mm) Spindle Travel, Z-2 Axis: 47.24" Total Axial Travel: 94.49"(2400mm) Rapid Traverse, X&Y Axes: 315 IPM Rapid traverse, Z, W and U Axes: 197 IPM Spindle Taper: CAT #50 Spindle Speeds: 6-1200 RPM - (3-Steps) Max. Spindle Thrust: 11,000 Lbs Constant Power Range: 79-1200 RPM Rotary Table Manufacture and Model: Mitsubishi DIT-A21X30 Rotary Table Size: 82" x 118" (2100x3000mm T-Slotted Rotary Table Max. Weight Capacity: 30 Tons Rotary Table Type: Insliding Rotary Inslide Travel: 59" (1500mm) Rotary T ...

Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...

Nakamura Tome WT-300 Multi Axis CNC Turning & Milling Center Age : 2007 FEATURES: FANUC 18I-TB CNC CONTROL TWIN 24-STATION TURRETS WITH MILLING TWIN OPPOSED SPINDLES C-AXIS BOTH SPINDLES Y-AXIS UPPER TURRET LNS QL SERVO S3 MAGAZINE BAR FEED CHIP BLASTER HIGH PRESSURE COOLANT SPECIFICATION: MAXIMUM SWING 9.84" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 30.71" DISTANCE BETWEEN SPINDLES 43.3" BAR CAPACITY 2.5" MAIN SPINDLE: MAIN SPINDLE SPEEDS 45-4500RPM C-AXIS ROTATION 0.001 DEGREE MAIN SPINDLE BORE 3.15" MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE NOSE A2-6 COUNTER-SPINDLE: SUB SPINDLE SPEED 4500RPM C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 33.46" SUB SPINDLE BORE 3.15" SUB SPINDLE MOTOR 25 HP SPINDLE NOSE A2-6 UPPER & LOWER TURRETS: NUMBER OF TURNING STATIONS 12 EACH NUMBER OF ROTARY TOOL STATIONS 12 EACH ROTARY TOOL SPEEDS 3600RPM ROTARY TOOL MOT ...

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...

Control: HEIDENHAIN TNC 124 Traverse path x/Y/Z 500/ 250 / 160 mm Travel W 480 mm Size (L x W) 885 x 320 mm Maximum table load 250 kg Distance from table - spindle nose 0-605 mm Speed x/Y 1-2000 mm / min Feed speed Z 1-1200 mm / min Tool - quick change system SF 32 RPM infinitely 9200 RPM 5 kW Dimensions (W x D x H) 1850 x 2550 x 2400 mm

- Speedometer Digital - Depth indicator Digital Maximum drilling capacity 30/35 mm Max threaded drilling capacity M12/M20 Spindle stroke 130 mm Spindle cone Morse 4 Max distance between spindle and table 790 mm Distance between spindle axis and column 308 mm Spindle stick Vertical stroke of the spindle stick 130 mm Spindle speed 1-160-1000 rpm. 2-320-2000 rpm. Dimensions of the plate 350 x 440 mm Dimensions of the upper plate 570 mm Engine power 2.7/1.7 kW Weight 305 kg Dimensions 400x900x1900 mm

Drilling capacity in steel / cast iron 50/65 mm Drilling capacity in steel 70 mm Feed 0.1 - 0.54 mm / Rev Speed 62-1240 RPM Recording MK 5 spindle stroke (drilling depth) 240 mm Usable projection 385 mm Table 800 x 680 mm Spindle head diameter 70 mm Height 2350 mm the machine  ... more information

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous  ... more information

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg  ... more information

Digital Table area 800 x 900 mm Cross-stroke table 1200 mm Drilling depth 700 mm Vertical stroke 900 mm Tool holder ISO 50  ... more information

-Turret fence -Thread cutter table 600 x 320 mm Speed 40-3600 RPM Spindle diameter 65 mm Recording Aciera quick-change system Spindle stroke 120 mm Dimension WxDxH 90 x 130 x 185 cm Weight 800 kg  ... more information

Digital display Heidenhain. Accessories available. Workspace Travel longitudinal X-axis 450 mm Travel transverse Y-axis 260 mm Quill stroke Z-axis 120 mm Travel machine head W-axis 450 mm Rapid traverse XY: 1,500 mm/min Workroom Clamping surface L x W 770 x 320 mm Table (KS 321-M) Tool quick coupler system : SF 32 Working spindle Speed range (infinitely variable) 50 – 9200 rpm Dimensions Space required (width x depth x height) 1500 x 1480 x 2330 mm Weight Weight approx. 1,300 kg

Table size 430 200 mm X trail 200 mm Y way 150 mm Speeds continuously variable motor 2 speed. 132-4600 RPM Throat depth 230 mm Quill stroke 110 mm  ... more information

Accessories available. Fehlmann stage KS 240 Drilling tailstock digitized Table size 530 240 mm Route x 280 mm Y way 180 mm Speeds, electronic, adjustable with potentiometer 132-4500 RPM  ... more information

Speed 45-4000 RPM Fehlmann table 380 x 750 mm X/Y/Z 420/300/500 mm Motor-driven height adjustment of the drilling head  ... more information