lathes used for sale

Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm ... more information

Description: Re-lathe Weiler Conversion to speed switching for thread cutting including hand lever cross support Dimensions: 1.40m x 0.65m x 1.30m Accessories: disposable pallet 0.60m x 0.40mApprox. Onsite Dimension. (l x w x h): 1,400 x 650 x 1,300 mm, weight approx.: 300 kg ... more information

number of spindles:6 spindle passage:81 mmcam controlled multi spindle automatic lathesix main spindles D=81mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information

Equipped with 2-axis digital readout. -1.5 kW. - Recording claws: D1-5 / CAMLOCK. -Number of speeds: 8. -Speed range: 70 - 2000 rpm -Main shaft recording: MK4. -Tailstock recording: MK3. -Tailstock diameter: 32 mm. -Incl 3 and 4 claw, adjustment plate, fixed goggles, -Guided glasses, lighting, cooling, change wheels.

Description: Retrofitted with digital displayDrehlänge: 800 mm, turning diameter over bed: 350 mm, turning diameter over slide: 205 mm, spindle bore: 46 mm, turning speed range: 25-2000 rpm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,500 mm ... more information

number of spindles:6 spindle passage:100 mmcam controlled multi spindle automatic lathesix main spindles D=100mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information

Description: Turning diameter Ø on bed: 1500 mm , Between points: 4.000 mm Steady Rest , weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 9,000 x 2,000 mm ... more information

Quality unchecked. Provide; 580 cutting hours! driven tool (3600 rpm), C-axis, part catcher, counter center, ... more information

max. turning diameter:395 mmturning length:490 mmcontrol:Fanuc 0i-TF Manual Guide swing dia.:650 mmstandard turning diameter:275 bar material dia.:68 mmspindle bore diameter:76 mmtravel -x axis:235 mmtravel -y axis:100 (±52,5) mmtravel -z axis:580 mmSpindle 1 RPM:4500 1/minSpindle 1 Power:18,5 kWSpindle 1 Torque:209,5 NmSpindle 2 RPM:6000 1/minSpindle 2 power:7,5 kWSpindle 2 torque:51,9 Nmturret stations / rotary tool stations:12/12 BMT 55Power rotary tools:5,5 kWRPM of rotary tools:5000 1/mintorque rotary tools:35 Rotary tool holders:4 Rapid feeds x/y/z:24/10/30 m/minRapid travel B-axis (parts transfer subspindle):24 m/mindimensions of the machine ca.:4125 x 1752 x 2085 mmtotal power requirement:50 kWweight of the machine ca.:4,2 thigh pressure coolant:50 bar Knoll KF110/700 Spindle 1 Chuck:200 mm Spindle 2 Chuck:150 mm Coolant through Mainspindle to Chuck:10 barSamsung turning center ...

Attention! This machine has already been dismantled and is in storage. ... more information

turning diameter:220 mmturning length:170 mmcontrol:Fanuc Spindle 1 power:15 kWSpindle 1 RPM:2500 1/minSpindle 2 power:15 kWSpindle 2 RPM:2500 1/minDistance between spindle noses:1100 mmTurret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:4 kWRPM of rotary tools turret 1:3000 1/minTurret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:4 kWRPM of rotary tools turret 2:3000 1/minTravel x/z turret 1:250 / 300 mmTravel x/z turret 2:250 / 920 mmTravel y Turret 1:± 60 mmTravel y Turret 2:± 60 mmBar capacity spindle 1:65 mmBar capacity spindle 2:65 mmpower chuck:254 mm Spindle bore sp. 1:77 mmSpindle bore sp. 2:77 mmdimensions of the machine ca.:4600 x 2900 x 3000 mmweight of the machine ca.:10400 kgUsed CNC Counter spindle turning and milling center with 2 y-axes and gantry loader- SMW210 mm chuck on right spindle. Special chuck on left side is not part of the ...

Attention! This machine has already been dismantled and is in storage. ... more information

Digital readout: Anilam mini wizard ... more information

number of spindles:6 spindle passage:51 mmArticle: cam-controlled multi-spindle automatic lathe with CNC-pickupManufacturer: SchütteType: SF51Yob: 1988six main spindlesfor bars up to D=51mmCNC-pickup in position 6 with rear CNC-machining;electronic cam control Balluff;independent feed position 4;chip conveyor: magnetic belt;oil/stee-running;additional coolant pump with double filter (magnetic cartridge filter).The machine tools shown and not listed are not part of the scope of delivery.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Vertical turning and grinding centreManufacturer: EMAGType: VSC 250 DSYob: 2008Control: SIEMENS 840DGrinding spindle speed: 30,000 rpmRotation spindle speed: 3,000 rpmTool places turret: 12Cooler for spindle and machine bed coolingCooling lubricant - lifting station (no independent cooling lubricant supply)Chip conveyorParts handling Air through the spindleTwo clamping circuits through the spindle (air and oil)Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mmArticle: multi spindle automatic latheManufacturer: SchütteType: AF51Yob: 1987eight main spindlesmax. bar diameter D=51mmcontrol SIEMENS SIMATIC S5pick up in pos. 7, for rear machiningthread cutting driveindependent feed in positions 2/3electronical trip dog control ?Balluff?clear text display Wöhrlecoolant pumpmagnetic cartridge filteroil runningincl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type)Painting in light blue and light greyThe configuration of tooling will be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Teach in lathe, Copper must carry chips and coolant ... more information

number of spindles:8 spindle passage:67 mmMachine type: CNC controlled multi spindle automatic latheManufacturer: MORI SAYType: TMZ 8/67 CNCYob: 2018Double four-spindle machine, eight-spindle machinewith spindles-drum locking by means of 3 HIRTH-type frontal rings and spindles set for HAINBUCH BZI SK80 colletsequipped with twin CNC systems model SINUMERIK SOLUTION LINE 840D SL for the control of:indexing speed of the spindles drum with bar feed at station 1speed and orientation of each of 8 main spindlesspeed and position of each of 8 frontal slidesspeed and position of each of 7 compound slidesspeed and position of the cut-off slide at station 8for a total of 30 CNC-controlled axes, with the possibility of requesting further upgrades from the manufacturer.Machine equipped with the following optional items:BAR LOADERautomatic bar feeder model PB 60 by CUCCHI BLT for bars L = 3 m, bundle  ...

Article: CNC-controlled multi-spindle automatic latheManufacturer: TornosType: MultiSwiss 8x26Yob: 2016full cross slide configuration,counter spindle,part-pre-drawing device,2 x driven tools,3 x Y-axis,1 rigid backworking,1 x driven backworking,2x 80 bar high pressure pumpsoptional: setting robot, manufacturer HandlingTech.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Quality unchecked. ... more information