lathes used for sale

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...

Okuma LU 35 M. Sold on behalf of the customer. Further data on request. Inspection possible in operation.  ... more information

For sale: Citizen cnc sliding head lathe type M32 with FMB 3 meter bar loading magazine. Max. spindle diameter is 32 mm. Max. drilling diameter is 12 mm. Max. tap diameter is M12. Maximum speed of main and side spindle is 8,000 rpm. Furthermore, this Citizen cnc longitudinal lathe is equipped with a 10 position turret with driven positions, a chip conveyor, Coolblaster high pressure system type CB-510 etc. Available on short notice, subject to prior sale.

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... more information

- Controller FANUC Series 18i-TB - max. rod Ø: 13 mm - Max. speed - main spindle: 12 000 min-1 - Max. speed - pick-up spindle: 12 000 min-1 - Headstock stroke: 130 mm - 3x rotating tools - Turning tools 4 + 4 - Bar feeder FMB minimag 18/3200 A  ... more information

Lathe Böhringer VDF with programmable cycles Type DUS 560 Machine No. 1022.3073-03 Built in 1993 Center width 2000 mm Connected load 19 kW Working Range/Dimensions Circulation diameter over bed 570 mm Circulation diameter via face slide 365 mm Sliding distance of the face slide 345 mm Displacement of the upper support 125 mm Center height over flat track 280 mm Bed width 360 mm Bed carriage guide length 520 mm Slide width 225 mm Slide length 680 mm Upper support width 140 mm Turning bit cross-section according to DIN 770 hxw 32x25 mm Main spindle Spindle head according to DIN 55 027 size 8 Spindle diameter in front bearing diameter 100 mm Spindle bore diameter 62 mm Inner cone of the main spindle 70 metr. Main drive Infinitely variable three-phase motor (AC motor) Drive power 60 % / 100 % ED 19/15 kW Torque 60 % / 100 % ED 1800/1400 Nm Total speed range  ...

Lathe Plauert DL 450, fully functional  ... more information

Control Heidenhain Plus IT with Turn Plus Turning diameter max. circulation 520 mm Turning length 1175 mm Cross slide at the top with turning/milling spindle as motor spindle, mounting HSK 63A Main / Counter Spindle C-axis Y-axis ±90 mm B-axis ±120° 12-speed turret with driven tools Tool disc magazine 1 x 36-speed Tailstock Conveyor Weight 15 t

Facing lathe DP 800  ... more information

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW  ... more information

○CＮＣ 　　CINCOM SYSTEM FS-32iB ○capacity - work piece 　　最大加工径　φ20mm 　　最大加工長　200mm 　　正面最大穴明け径　φ10mm　最大タップ　M8 　　背面最大穴明け　φ8mm　最大タップ　M6 ○ Main Axis 　　正面主軸回転数　10000rpm 　　背面主軸回転数　8000rpm ( rare end ) ○ATC 　　21 tools 　　くし刃　旋削5本＋milling 4 tools 　　正面穴明け　4本 　　背面穴明け　8本 ○motor 　　主軸用　2.2/3.7kw 　　背面用　1.1/1.5kw ○機械の大きさ 　　寸法　幅2540mm＋チップコン719mm×奥行1185mm×高さ2 152mm 　　重量　2200kg ○Bar feeder 　　オートバー　Alps　ASR X-20ZCⅡ　 length 3.0m

Machine weight: 20,000 kg Faceplate diameter 1250 mm Number of supports: 1 pcs Dimensions: height 4250 mm width 5630 mm depth of 3550 mm Extras: copying apparatus, turret head on the vertical support Technical condition at the time of sale: Replacement rotary amplifier on thyristor converter. Not operated since 1994 p. Small repair and adjustment of electrical and mechanical parts. The maximum dimensions of a workpiece Height 1150 mm The diameter of 1400 mm Weight 8000 kg

Turning Diameter: 640mm Turning Length: 1,585mm Standard Turning Diameter: 400mm Distance Between Spindles: 1,930mm Max RPM: 4,000 Power Capacity: 36 / 45 KW Max Torque: 600 Nm  ... more information

Max Turning Diameter (in): 16.14 Max Turning Length (in): 13.78 [23.63, 39.37] Spindle Nose Type: A2-6 [A2-8, A2-11] Speed Range (min⁻¹): 50~5,000 [42~4,200, 30~3,000] Standard Power (hp): 30/20 Rapid Traverse X/Z (ipm): 984/1,182  ... more information

Max. workpiece diameter: 175 mm Max. workpiece length: 420 mm Max. bar capacity diameter: 65 mm Max. X-axis stroke: 165 mm Max. Y-axis stroke: 80 mm Max. Z-axis stroke: 420 mm  ... more information

2 x 12 driven position turrets - 2 x C axis - Y axis in upper turret 100 mm (+/- 50 mm) - Fanuc 31i-B Control - tool eye - high pressure pump - rotating unloader - well tooled - LNS Sprint S2 barfeed with rear magazine.  ... more information

Sell a used Monforts KNC 5 Year of construction 2001 Spindle head size 8 Rod passage 70mm Sinumerik 810 D control system with manual turn Center width 1080mm Circulation Ø Face carriage 260mm Circulation Ø max 500mm Speed range 2-2800 1/min Documentation fully available Parat Holder Coolant system Tailstock Conveyor New 3 jaw chuck Centra Machine is fully functional Geometry very good

GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...