lathes used for sale

Inv. Num. : 6136 Type: CTX alpha 5000 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Operating hours: 22803 h Switching-on hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Loader CNC Spacesaver SS 2500 (2018)

Inv. Num: 5302 Type: DL 10G Producer: Profika Generated: 2011 Parameters: Control system: FANUC 0iMATE-TD Maximum rotation length: 185 mm Max turning diameter: 170 mm Maximum spindle speed: 3500 rpm Lathe length: 1980 mm Lathe width: 1420 mm Weight: 2750 kg  ... more information

Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools

Control system: FANUC Series 31i Model A Engine hours: 11750 h Maximum Z-axis feed length: 550 mm Maximum length travel in the X-axis: 220 mm Maximum main spindle speed: 4000/6000 rpm Maximum rotation length: 530 mm Max turning diameter: 240 mm Grinding diameter: 550 mm Lathe diameter: 210 cm Maximum length travel in the ZB axis: 720 mm Maximum length travel in the Y-axis: -40 mm Number of all tools: 12 pieces Counterspindle power: 3.7/2.2 kW Spindle drive power: 15/11 kW Lathe length: 3045 mm Lathe width: 1707 mm Lathe height: 2021 mm Lathe Weight: 4600 kg Facilities: 8 pieces tool holder 4x piece of driven tools Reduction sleeves of the inner holder 2019: Replacement of chuck and tool probe

Inv. Num: 5234 Type: SPRINT 20 linear Producer: DMG GILDEMEISTER Generated: 2006 Parameters: Engine hours: 79172 h Switch-on hours: 50648 h Max turning diameter: 20 mm Maximum length travel in the X-axis: 35 mm Maximum travel Z-axis: 80 mm Maximum feed speed Axis X: 40 m/min Maximum feed speed Axis Z: 40 m/min Number of spindles: 2 pieces Maximum main spindle power: 5.5 kW Minimum main spindle speed: 1 1/min Maximum spindle speed: 10000 rpm Axle X2: 230 mm Axis Z2: 180 mm Maximum length travel in the Y-axis: 240 mm Counterspindle power: 3.7 kW Maximum counter spindle speed: 1 1/min Maximum speed of the driven tools: 1000 rpm Lathe length: 2275 mm Lathe width: 1300 mm Height: 1760 mm Weight: 2.6 t Facilities: Rod loader with magazine Conveyor Liquid cooling Technical documentation Full coverage of the work area

Used lathe Internal machine number m3533 Manufacturer: Colchester Type Triumph 2000 Ma.Number 36658 Center width 750 mm Center height 190 mm Spindle bore 54 mm Speeds 25 to 2,000 rpm. Weight approx. 1,200 kg With cabinet and accessories Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to ...

Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix  ... more information

Control OSP P20L-R Max. turning diameter 300 mm Max. turning length 450 mm Spindle speed 3000 min-1 3-jaw chuck diameter 210 mm 12-speed revolver with attached Competition. Conveyor  ... more information

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Control Bosch CC200 Turning diameter 160 mm Turning length 460 mm Speed 4000 1/min 12-fold revolver with 6 antr. Tools Spindle passage 70 mm Tailstock Conveyor 3-jaw chuck Röhm Accessories  ... more information

digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock  ... more information

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock  ... more information

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories  ... more information

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...

Okuma LU 35 M. Sold on behalf of the customer. Further data on request. Inspection possible in operation.  ... more information

For sale: Citizen cnc sliding head lathe type M32 with FMB 3 meter bar loading magazine. Max. spindle diameter is 32 mm. Max. drilling diameter is 12 mm. Max. tap diameter is M12. Maximum speed of main and side spindle is 8,000 rpm. Furthermore, this Citizen cnc longitudinal lathe is equipped with a 10 position turret with driven positions, a chip conveyor, Coolblaster high pressure system type CB-510 etc. Available on short notice, subject to prior sale.

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... more information

- Controller FANUC Series 18i-TB - max. rod Ø: 13 mm - Max. speed - main spindle: 12 000 min-1 - Max. speed - pick-up spindle: 12 000 min-1 - Headstock stroke: 130 mm - 3x rotating tools - Turning tools 4 + 4 - Bar feeder FMB minimag 18/3200 A  ... more information