subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Description: Super silenced screw compressor, 380 volt power supply, 8 bar pressure, power 10 Hp, never used in its original packagingApprox. Onsite Dimension. (l x w x h): 1,000 x 800 x 800 mm, weight approx.: 150 kg ... more information
Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mmTechnical description :6-axis Industrial Robot with payload of 500 kgsincluding electrical cabinet operating panel and cable ... more information
Manual mandrel bending machine, incl bending jigs for tube 16mm R40, 19mm R50, 22mm R75, and some special rollers, auxiliary rods for mandrel. ... more information
Unused, shrinkage range 15-63mm, maximum aperture 75mm, 53.5 mpa, power 500 T, 3000W ... more information
equipped with double crankshaft with rear gear transmission; incl. decoiler; bending machine for strip material; Sound-absorbing cabinet and outfeed belt ... more information
Description: Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 liter tank, digital control panel, inverter for motor management, adjustable pressure 8 bar, never used, 0 hours packed in its original packagingApprox. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,500 mm, weight approx.: 300 kg
Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mmTechnical description :6-axis Industrial Robot with payload of 500 kgsincluding electrical cabinet operating panel and cable ... more information
Automatic bar loading magazine for single spindle automatic lathe / short lathe, newTEST the new DB-EVO bar loader4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)very high speeds even with profile materialManufacturer: Giovanni CucchiMachine type: Automatic bar loading magazine for single-spindle / short turningType: DB-EVODesign: Surface loading magazine or bundle loading magazinediameter range: 20-110mmDB-EVO at a glance:Scope of delivery and optionally orderable functions:- oriented loading of the bar material possible (e.g. edge upwards) - optional feeding of saw cuts and short parts possible - optional- Monitoring and fault diagnosis (touch screen)- Surface magazine- Bundles and other variants possible- automatic loading of short bars- Trays for tools- low power consumption (start/stop function)- Available in versions for 1.5, 1.8, 2.5, 3.3, 4.2 and 6.1 meter rod length ...
Description: Super silenced screw compressor, 380 volt power supply, 8 bar pressure, power 10 Hp, never used in its original packagingApprox. Onsite Dimension. (l x w x h): 1,000 x 800 x 800 mm, weight approx.: 150 kg ... more information
Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 1800mm ... more information
Bar loading magazine for multi spindle automatic lathe, newManufacturer: Giovanni CucchiMachine type: Bar loading magazine for multi-spindleType: DBM/DBMFDesign: Surface loading magazine or bundle loading magazinediameter range: 6-67mmDB-EVO at a glance:Proven technology - in use for decadesThe material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking them on the machine for changing feed grippers and cleaning work. These magazines do not require bar tubes on the machine and are bolted directly to the machine (see pictures).It is possible to work in automatic mode as well as in manual mode. In the event of any malfunctions, the magazine can be used as a conventional bar guide tube. This eliminates machine downtime if service technicians are required.These ...
Description: Super silenced screw compressor, 380 volt power supply, 7.5 kW 10 hp with 330 liter tank, digital control panel, inverter for motor management, adjustable pressure 8 bar, never used, 0 hours packed in its original packagingApprox. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,500 mm, weight approx.: 300 kg
Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 2000mm ... more information
Bar loading magazine for multi spindle automatic lathe, newManufacturer: Giovanni CucchiMachine type: Bar loading magazine for multi-spindleType: CMSP/CMSPFDesign: Side loader as surface loading magazine or bundle loading magazineCMSP / CMSPF at a glance:Proven technology - in use for decadesThe material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the machine at any time by unlocking them at the quick release.These magazines do not require bar tubes on the machine and are screwed directly to the machine. It is possible to work in automatic mode as well as in manual mode.The magazine is mounted on rails, so it can be easily disconnected from the machine at any time by the operator by unlocking it on the machine. To change bar diameters, only the clamping sleeves of the ...
Room dim. approx. 1200x1200x800 mm; Hive dim. approx. 1200x1170 mm; 10.9 kVA; v.v. "Belki" seperator; "Dosatron" dosing pump; type D3RE10; "Hydro Systems" injector; type MiniDos 12; drip tray; exhauster; high-pressure sprayer; control box and diaphragm pump; incl. (2x) basket trolley ... more information
Description: Electric pallet truck, equipped with lithium battery and rapid battery charger, 24 volt batteries, with electric traction and lifting. Never used, 0 hours in its original packagingApprox. Onsite Dimension. (l x w x h): 1,400 x 800 x 800 mm, weight approx.: 250 kg ... more information
Article: transfer machineManufacturer: MikronType: Multistep XSYob: 2007Number of modules: 4Number of spindles: 6Control: Bosch Rexroth MTXCoolant unit: Knoll VRF450/2100Extraction: Elektrostat / LTAPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information