subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Oil Mist Separator Koton KF-20E Intake pipe: Ø 150 mm Oil drain hose: Ø 6 mm Voltage: 380V 50HZ Air flow: 1080 m³/h Power consumption: 0.4 kW End filter service life: 4000-6000 h Machine dimensions: 633 X 380 x 856 mm Weight: 46 kg incl. accessories for installation Delivery possible
Electric Automatic Inclined Bed Filter Cloth Belt Filter Gravity Nonwoven Belt Filter Coolant Preparation 1000mm x 1760mm with Circulating Pumps For cleaning liquids, sewage, emulsions, cooling, lubricants of suspended solids and particles, with circulation pumps Manufacturer Seperatoren- Technik und Anlagenbau GmbH Year of Make: 2016 as good as new, unused Type: E-BF 150 BOM number 021966 Machine number: 16-0002 Tank capacity: approx. 550 litres Operating voltage: 3x400 V Frequency: 50 Hz Pre-fuse: A 16 Max Throughput: (I/min) 150 Control voltage I (V)24 DC Weight: approx. 400 kg Length: approx. 2760 mm with control cabinet Width: approx: 1100 mm Height: approx.: 1020 mm with control cabinet Nonwoven Tape Roll Width: approx:1000 mm Fleece Tape Roll Length : approx: 1760 The filter is used to clean liquids. The liquid to be cleaned runs onto the fleece. ...
nv. Num. : 7572 Type: BOSS 322E Produzent: IEMCA Erzeugt: 2012 Parametern: Maximale Stablänge: 3200 mm Gewicht: 830 kg ... more information
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
Article: three-phase current motorManufacturer: Antriebstechnik BauknechtType: RFV 22/4-75Pe.g. to use as spindle motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
Article: Brushless ServomotorManufacturer: BoschType: SD-B5.380.020-00.000e.g. to use as feed motor for Schutte multispindle automatic lathe SF51DntPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
24 pieces drillholder for INDEX MS32 / MS42tool holder 1 inchPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
Tool drive motor for e.g. Schütte S32PC, not usedVariable tool drive for e.g. pickoff in positions A, B, C, DPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
Article: pumpManufacturer: GrundfosType: 71A2-14F85-BPlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... more information
drum diameter:400 mmrevolutions per minute:980 U/mintotal power requirement:2,2 kWLanner batch wringer ME41-2for deoiling of metal chips-turnkey delivery and easiest handling-very long service life, operation free of vibrations-compact and easy to maintain, i.e. low maintenance costs and quick return of investment-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control-including control cabinet laterally placed, i.e. not in swivel range of crane-drum volume 35 Liter/max. 50 kg-rotation speed max. 980 min-1-power 2,2 kWPainting:RAL 5012 light blue (batch wringer, crane support)RAL 1003 signal yellow (traverse)RAL 7035 light grey (control cabinet)In each case silk gloss. Changes after consultation.Also included in the scope of delivery:-Crane support with swivel arm: mounted on the side of the centrifuge ...
Technical description :2 Units CLAMPING CUBES 400 x 500 x 800 mm length ... more information
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3900 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12500 kgTechnical description :- Travel from middle is = 1650mm left / 1650mm right- Stroke upper carriage from middle = 1610mm left / 930mm right- Thrust capacity = 130 kN - Thrust speed carraige = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carriage = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carraige = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...
length:250 mmwidth:200 mmheight:400 mmBase plate dim:400 x 400 mm ... more information