subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Manufacturer: Tecnimetal Internationale Type: P&S Built: 2004 Total length: approx. 240 cm Total width: approx. 65 cm Total height: approx. 145 cm Basket height: approx. 60 cm Opening for chain: approx. 145 cm All information without guarantee ... more information
TEKA extraction system The filter device TEKA - PF/S was used for the extraction of graphite dust. It has been cleaned and is in very good condition. An operating manual is available. ... more information
power capacity: kWtool adaptor: tool taper: HSK-A 100 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m2-axis (simultaneous) fork type milling headPower capacity - milling spindle Milling spindle 35 KW from 5000 rpmSpindle speed max. 12000 rpmSwivel range:A axis + / -95 degC axis 360 degNote: Milling head was only a short time in operation.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used Top Loader for 3000 Monoplane Bars Used machine visible in Italy, sold as it is ... more information
TrumaSort R4 Sorting of productions parts in 4 standardized containers ... more information
: 200 mbar: 248 m³/hturning speeds: 950 U/mintotal power requirement: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
power capacity: 0,18 kWvolt: 400/230 Vampere: 0,6/1,05 Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
GANTRY SHEET HANDLING SET Biele Gantry stacker Sheet metal handling set Gantries and stackers for sale High capacity stacker with high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measures of the machinery are: Complete tour of up to 9,100 mm. Width 8,200 mm. Height 2,640 mm. Length of the support 12,000 mm and which in turn has a width of up to 1,100 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measurements of the machinery are: Full travel of up to 8,500 mm. Width 4,500 mm. Height 2,850 mm. Length of the support 4,000 mm and which in turn has a width of up to 1,500 mm. ó long, high capacity and weights to stack all kinds of material, sheets, etc. In factories, industrial buildings,... The main measureme ...
Spindle circle 165 mm Interface Gildemeister GM 16 AC ... more information
Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg
feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20 ... more information
x-axis: 210 mmy-axis: 300 mmvoltage: 230 Vcurrent: 16 Aweight: 260 kgdimensions of the machine ca.: 1,75x1,0x0,9 m3-axis laser system2 VitroScan 3D scanning systemsLCS-line projector 1200 ANSIallows for the production of three-dimensional face scans (3D portraits of people) and other 3D glass objects, as well as the internal engraving of photographs.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roughness meter, Contour measuring device Manufacturer: Hommel Type: T 8000 Year of construction: 2005 Specification: DIN EN ISO 4287 Ra, Rz, RmaxRSm ... more information
diameter:15,20,25,30,35,40,45,50 mmBar pusher diameter:16, 20,25,30,35,40,45,50 mmChannel diameter:17,22,27,32,37,42,47,52 mmbar length:3000 mmCenter of spindle height above floor:1110 - 1230 mmdimensions of the machine ca.:5x012x1,8 mweight of the machine ca.:2,5 tBar feeder magazine which can change channels automatically for 8 different diameters: 50 / 45 / 40 / 35 / 30 / 25 / 20 / 15 mmTurret system.Smallest diameter is 10 mmBar loader was installedat a Biglia B 445 3T 3Y
Description: Device no. 49 303.01, 230V/50 HzApprox. Onsite Dimension. (l x w x h): 550 x 500 x 200 mm, weight approx.: 20 kg ... more information