gear cutting and hobbing machines used for sale

max. wheel diameter: 1200 mmgear width: 1000 mmmax. module: 25/36 Modulmin. module: 1 Control: Siemens 840 D PowerLinetable diameter: 1200 mmtable load: 15 ttotal power requirement: kWweight of the machine ca.: 24 tdimensions of the machine ca.: 6,5 x 4 x 3,75 mGleason-PFAUTER CNC hobbing machine P 1200 for gear cutting of cylindrical andworm gears worm gears and all other rolling profiles and shapes that regularly occur on the cylindrical workpiece circumference.Remark:Machine designed for external milling, large milling head M3. Machine withcounter stand.Scope of equipment:- Basic machine P 1200, Siemens 840D PowerLine (XP)- Motorised milling head M3 - Special speed series motorised milling head M3- Extended software for fault diagnosis - Main stand - raised 1000mm- Power clamping device - 2 x fume separator make 3nine type EMMA - Chip scraper conveyor- Set of adjustable wedges - Dia ...

max. wheel diameter: 1200 mmgear width: 350 mmmax. module: 16 min. module: 0,5 max. workpiece diameter: 1400 mmtable diameter: 1200 mmtable hole: 300 mmcontrol: Siemens 840D Powerlinetotal power requirement: 75 kWweight of the machine ca.: 24 tdimensions of the machine ca.: 5x3x3,8 mGleason-PFAUTER CNC gear shaping machine P 1200 S for the production of internally and externally cylindrical gears with internal and external teeth and other rolling profiles and moulds profiles and moulds that regularly occur on the cylindrical workpiece circumference and for the production of profiles in the single part process.Special version with hydraulic shaping head H1SCOPE OF EQUIPMENT:- Basic machine P1200S, Siemens 840D Powerline (XP)- Hydraulic shaping head H1- Signal light (3-colour)- Extended software for fault diagnosis- Telephone diagnosis system- Chip disposal through table bore- Set of adjus ...

max. wheel diameter: 250 mmgear width: 275 mmmax. module: 5 table diameter: mmweight of the machine ca.: 5 tchange gear, internal cutting head, normal head and tangential head.Video Link:http://www.youtube.com/watch?v=90urAqbFCTIPhotos:https://picasawe b.google.com/104950607176033391845/ModulZFWZ3000X30MmGearHobberThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hobbing length: 1750 mmmilling width: 260 mmmax. module: 10 table size incl. water gutter: 460 x 2100 mmtable clamping surface:: 250 x 1850 mmcutter width - max.: 100 mmfeed of the milling slide, stepless: 0 - 500 mm/min.rapid traverse feeds: 3000 mm/minmilling head -swivable +/-: 30 °Rotation speed range of milling head, in 9 steps: 29 - 178 rpmMilling head swivable 2 sides helical gearcutting: 30 °total power requirement: 4 kWweight of the machine ca.: 4 tdimensions of the machine ca.: 4 x 1,85 x 1,85 mAccessories:Change gearsMilling arborsOperating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 300/400 mmgear width: 70 mmmax. module: 6 min. module: 0,5 total power requirement: 50 kVAweight of the machine ca.: 7,4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 350 mmgear width: 160 mmmax. module: 10 min. module: 1 table load: 200 kgtotal power requirement: 8,5 kWweight of the machine ca.: 5900 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 tvoltage: 220/380 Vfrequency: 50 Hzdimensions: 3010 x 1800 x 2200 mmtotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifti ...

max. wheel diameter: 400 mmgear width: 290 mmmax. module: 6 min. module: 0,5 weight: 4,6 ttotal power requirement: 17 kWWorking area:1. largest module to be milled 6 mm2. straight toothing a) Largest workpiece Ø 400 mm b) Largest length of toothing 290 mm3. smallest number of teeth to be milled for 1-speed sub-gear 6 with 2-speed gearbox 3Dimensions:1. Ø of the workpiece table 400 mm2. Ø of the table dimensions 80 mm3. diameter of the workpiece mandrel 36 mm4. largest clampable milling cutter: Ø diameter 160 mm Length 160 mm5. diameter of the milling cutter arbour 32, 406. centre distance between milling cutter and workpiece a) Largest distance 300 mm b) Smallest distance 30 mm7. drive cone for milling arbors MK 48. maximum milling cutter displacement: a) Tangential milling 120 mm b) Shifting 100 mmThe data for this ad was created with ModulMWS - the software solu ...

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,9 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,9 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 90 mmgear width: 50 mmmax. module: 3 min. module: 0,5 Control: Siemens 840 C total power requirement: 16 kWweight of the machine ca.: 7,9 tdimensions of the machine ca.: 2 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

cone distance (outside): 645 mmmax. gear pitch diameter: 650 mmnumber of teeth: 999 total power requirement: 99 kWweight of the machine ca.: 25 tdimensions of the machine ca.: 3 x 3 x 4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 40 - 160 mmgear width: 90 mmControl: SIEMENS SINUMERIC 840D Gear shaving - / deburring machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: 40 - 160 mmgear width: 90 mmControl: SIEMENS SINUMERIC 840D Gear shaving - / deburring machineThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. grinding diameter: 400 mm: 18010 shaving cutter - diameter: 64 - 320 mmindexing: schleifbar 1 -12 Modulshaving wheel width: max. 40 mmnumber of teeth: 13 - 240 roller bend diameter min./max.: 73 - 320 mmslide speeds: 5-20-30-40 Zähne/min.max. dia. of grinding wheel: 762 mmgrinding wheel - swivable: 5-21 °grinding slide swivable +/-: 2 x 35 °total power requirement: 3 kWweight of the machine ca.: 4,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 40 - 160 mmgear width: 90 mmcontrol: Siemens Sinumeric voltage: 400 Vfrequency: 50 Hzconnected load: 34 kVAloading: 800 Euro The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- Control: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- total power requirement: --- kWweight of the machine ca.: --- tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

max. wheel diameter: --- mmgear width: --- mmmax. module: --- min. module: --- Control: --- total power requirement: --- kWweight of the machine ca.: 5,0 tdimensions of the machine ca.: --- mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information