subcategories
(3rd category level)
Manufacturer:
(Category: 201)
SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002 ... more information
SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - sn 06 - CE rules (year 1998) ... more information
Circular table saw Elmag with sliding table The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12
Cutting and miter saw • Saw blade diameter: 420 mm • Saw blade holder: 40 mm • Cutting length: 410 mm (at 90°) • Cutting height: 170 mm (at 90°) • Machine can be swivelled on both sides via hand crank (from 90° to left by 45° and from 90° to right by 30° to max. 60°) • HM circular saw blade for wood (420 x 3.4/2.4 x 40 mm 48 WZ neg) • stable cast iron construction • Precise ball bush guidance of the tool slide on hardened and ground steel shafts • Saw feed manually • Miter range horizontal: 45° - 90° - 25° • Miter range vertical: 90° to 45° (left) • re-adjustable fixed stops • Lower saw blade protection can be connected to a suction system (diameter suction nozzle = 100 mm) • incl. machine stand for type 170 N • Weight: 120 kg Engine data: • Power: 3 kW • Speed: 2710 rpm • Voltage: 400/230 V • Rated current: 6.4 ...
Automatic under-table crosscut saw The complete unit consists of the automatic under-cutting saw (UKS 600 HA), a feed line with a new automatic positioning insert (TigerStop TS 6.0 L / 2019) and a run-off runway. 1. Automatic under-cutting saw UKS 600 HA - Working height: 800 mm - Diameter connection socket for suction chip catcher (machine): 120 mm - Diameter connection socket for suction contact hood: 120 mm - Suction speed: 20 m/sec - Suction capacity: 2000 m3/h - Diameter saw blade: 500 mm - Diameter saw blade bore: 80 mm - Saw blade overstand at 500 mm saw blade: 160 mm - Cutting speed at 500 mm saw blade: 78 m/sec - Short stroke for small wood cross-sections up to 240 x 120 mm (up to 36 strokes/min) - Long stroke for larger cutting widths up to 600 x 120 mm (up to 18 strokes/min) - Automatic protective hood and holding device - Cut triggering via two-hand control ...
PUTSCH panel saw Product Name: Putsch Panel Saw Type: SVP 420 M Machine number: S-420-10.420.013 Condition : New device Technical details: • max. cutting length: 4,200 mm • max. cutting height: 2,200 mm • highest horizontal cut: 2,080 mm • max. cutting depth: 60 mm • Connection for suction: 100 mm diameter • Engine power: 5 hp/3.75 kW • Saw blade speed: 5,300 rpm • Saw blade diameter: 250 mm • Dimensions: L x W x H = 5,750 x 1,400 x 3,150 mm • Weight: approx. 1,000 kg Transport dimensions: L x W x H 1st box 1,150 x 3,100 x 1,200 mm 2nd box 5,300 x 150 x 235 mm Number of packaging units: 2 • the model series 420 is particularly suitable for continuous use in confined spaces • electr. driven, automatic shifterost • swung away center support f ...
Holzkraft Precision Wood Band Saw HBS 533 SET Product name: Precision wood band saw HBS 533 SET Manufacturer: Holzkraft Item number: 5155303 SET Year of construction: 01/2022 Condition: As good as new technical details: • Dimensions work table (L x W x H): 535 mm x 535 mm x 945 mm • Saw table inclination: -10° to +45° • 2 x suction nozzles • Diameter suction nozzle: 2 x 120 mm • Working table length max.: 685 mm • Work table widening length: 535 mm • Work table widening width: 150 mm • Cutting height max. 90°: 270 mm • Cutting width max. with stop: 474 mm • Cutting width max. without stop: 514 mm • Band saw blade speeds: 850/430 m/min • Band saw length: 3,865 mm • Band saw guide: precision guide at the top and bottom • Weight: approx. 163 kg • incl. band saw set, length 3865 mm, 3 pieces - 1x band saw blade wood 3865 x 10 x 0.5 ...
Maka V250 - Multi-blade saw Product name: Multi-blade saw Type: V250 Manafacture: Maka Machine number: 31209 Year of construction: 2010 Condition: used, revised and checked Technical details: - max. cutting thickness: 110 mm - Width of the transport carpet: 250 mm - min. length workpiece: 280 mm (with a special wooden pressure shoe - 1x available as a sample) - Length of the workpieces to be machined: 560 mm - Feed speed of the transport carpet: 0-36 m/min - Max. throughput width: 680 mm - Height of the work table from the floor: 780 mm - Diameter of the suction opening: 250 mm - Weight: approx. 1,700 kg Engine data: - Total power: 18 kW - Voltage: 400 V - Current: 34 A - Speed: 2,930 / 3,515 rpm Machine dimensions/set-up dimensions (L x W x H): 2,750 x 1,790 x 1,850 mm - Number of packaging units: 1 - Weight: approx. 1,700 kg standard accessory: - 1 pie ...
Band saw 400 mm Product Name: Band Saw Type: Model 402 Manufacturer: Country Bulgaria Serial number: 1594 Year of construction: 1980 Condition: used, completely refurbished Technical details: - Table size: 630 x 630 mm - Table inclination: approx. 30° - Cutting height: approx. 220 mm - Cutting width without stop: 380 mm - Saw blade guide with one back roller each at the top and bottom - Belt length: 3,015 mm - Roll diameter: 400 mm - Diameter of suction nozzle: 80 mm -Incl. 2 pieces of saw blades - 10 mm for plastic 1 piece of saw blade – 12 mm for wood 14 saw blades – 18 mm for wood - no stop available ! Engine data: - 380 V / 50 Hz / 2.5 A (see nameplate!) - Power: 1.1 kW - Speed: 1410 rpm Transport dimensions: - Width: 1,050 mm, Depth: 640 mm, Height: 1,850 mm - Transport dimensions (L x W x H): 1,200 x 800 x 2,02 ...
SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003
SECOND- HAND SPINDLE MOULDER SCM MOD. T130NPS - CE RULES - with inverter - sn AB/155496 - year 2003 ... more information
SCM sliding table saw model SI15WF: – 2500mm steel carriage (2700mm stroke) – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3200-4500-6000rpm – without engraver Machine not according to CE standards, for export ... more information
Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992 ... more information
Multi-blade saw Paul type K 34 G 2600 Specifications: • Working width (mm): 2600 • Engine power (kW): 37 • Top rollers: with PU rubber coating ... more information
Crosscut saw Omga T620 Cutting width max 400mm Cutting height max 140mm Pneumatic material clamping Pneumatic passage of the cutting unit Two tables with a length of 2x200cm 4kw motor ... more information
SCM horizontal panel saw model Z32 : – useful cutting length 3200mm – useful cutting depth 3080mm – useful cutting height 90mm – Blade carriage with variable speed from inverter – blade with variable speed from inverter – blade D=350mm, 10 hp motor – engraver D=150mm, 1.5 hp motor – motorized pusher, increased to the full cutting length – pusher speed 3 m/min (fast) and 0.2 m/min (slow) – ELAP CM400 electronic control – double pneumatic side puller – 3 front shelves, length 1500mm – dimensions 5 m (width) x 5.7 m (depth) Machine not according to CE standards, for export
Multirip saw OGAM PO 220 Track width 260mm Maximum spacing 220mm Maximum cutting height 110mm Feed speed adjustable on variator First gear 5-20m/min Second gear 10-40m/min Maximum diameter of discs 320mm Main motor power: 15kw ... more information
Double-saw mitre saw Hoffmann MS35-SF 45° bevel cuts Saw motor 2×1.8kw Saw blade speed 3000r.p.m Saw blade size 350mm, hole 30mm Working width max 80mm Working height max 80mm Dovetail milling units 2×0.5kw Rotational speed of milling machines 19.000r.p.m Two milling positions can be set Working pressure 6bar CE Certified Extraction pipes 2x120mm DTR Documentation Weight: about 800kg Total dimensions of the machine including tables 520x92x170cmH