milling machines used for sale

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

CNC milling machine 2100x4000mm 9kW HEAVY DUTY TechnologieCNC CNC Industry 2.0 2140 ATC The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. ✔The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 9kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as t-groove slots for manual clamping of irregular shapes. ✔ATC - The machine is equipped with an automatic linear magazine wi ...

TechnologieCNC Milling Plotter CNC 1530 INDUSTRY 2.0 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Covscsx ◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of th ...

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

Table extension, extendable support, finely adjustable milling fence, stop adjustment via handwheel, clockwise/counterclockwise rotation---------- Technical Data ----------table size: 2,530x730 mm, work table height: 910 mm, spindle diameter: 30 mm, effective milling spindle length: 130 mm, max. milling cutter diameter: 300 mm, max. retractable milling cutter diameter: 300 mm, height adjustment: 180 mm, speeds: 3000/4,500/6,000/8,000/10,000 rpm, Motor: 7.5 kW, Suction nozzle: 120 mm, Suction nozzle bottom: 120 mm, Dimensions (LxWxH): 2,620x1,000x1,170 mmSold as is, without technical inspection

Finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical Data ----------Table size: 1,000x930 mm, Work table height: 860 mm, Spindle diameter: 40 mm, Useful length milling spindle: 160 mm, Max. milling cutter diameter: 255 mm, Max. retractable milling cutter diameter: 255 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction nozzle: 120 mm, Dimensions (LxWxH): 1,000x930x1,050 mmSold as is, without technical inspection

CAMAM rotary milling machine for large workpieces Spindle diameter 35mm Spindle height 130 Maximum workpiece radius 440mm Pneumatic clamping of the material Motor power 7.5kw Net price  ... more information

Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)

Lock case stemmer aggregate: yes; ... more information

max. workpiece diameter: 80 mmmin. workpiece diameter: 5 mmworkpiece length: 800 mmtotal power requirement: 12 kWweight of the machine ca.: 3500 tdimensions of the machine ca.: 2,4x1,8x1,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation ...

A description of the machine: RECORD 125 NESTING CNC machining centre with loading and unloading for milling, cutting, clearing, drilling, etc. The machine for sale has recently been taken out of service. It is in good working order. A twin machine can be seen on site, only the spindle is different between the two machines. Model RECORD 125 NESTING Power supply 400V - 50/60 Hz X-Y-Z axis travel 3700x1720x400mm X-Y-Z axis speed up to 80-55-22m/mn Real part passage (light) 335(310)mm OSAI system Water-cooled ELECTROMANDRIN power supply Electromandrel 6.6kW 24000rpm (no angular gear heads) Magasin Rapide12 - HSK 63 12-position automatic tool magazine 2 Becker 250m3 dry vane vacuum pumps Multiple chuck drilling head Movable control panel NUM1040PC control unit with Xilog Plus and Telesolve 3 safety mats Mesh protection perimeter Automatic slide lubrication Our in-stoc ...

CNC milling machine 2132 OPTIMAT 2100x3200 ATC 100% European product New for 2022! CNC milling machine 2132 with a weight of approx. 4100 KG and a working table area of 2100x3200mm, equipped with an automatic 12th tool linear magazine cooperating with the HSD / HITECO 9kW 24000rpm electrospindle (ceramic bearing, HSK F63 interface) enabling the use of tools with a diameter up to 26mm inclusive! Technical parameters: Effective working size: 2100x3200mm - Trouble-free processing of the entire size of the furniture board - Vacuum workbench made of HPL Machine weight: approx. 4100KG - The frame of the machine made of the highest quality alloy is welded in its entirety, then subjected to the stress relieving process in a special chamber with special conditions, and then milled. This process ensures that excellent results of structural rigidity and stability are achieved Z-axis stro ...

Panel thickness (min/max) 5/50 mm Cutterhead rotation speed 30000 rpm Motor power 0,8 kW Table dimensions 320x440mm Milling axis Ø 6 mm Sufficient and constant compressed air Ø 6 mm Power 220 V/50Hz Transport dimensions 720x500x470 mm Weight 25 kg Price 299 Eur (EXW Jonava, Lithuania

Working size 420x280x60cm With 4 spindles head  ... more information

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Gebr. Table milling machine with cross-cut saws STEHLE F3E Table size: 117 x 86.5 cm Table height: 85.5 cm Milling machine: Motor power: 4 kW 2 milling spindles: 30 + 40 mm Height adjustment via handwheel Height adjustment range of the milling spindle: 115 mm Left- and clockwise rotation 4 speeds: 3.0 / 5.0 / 6.0 / 10,000 rpm. Doubling the speed via selector switch Crosscut saws: Engine power: 3 hp (2.2 kW) max. saw blade diameter: 350 mm max. cutting height: 110 mm Lateral adjustment range: 120 mm Sliding carriage incl. slotted hood (self-made) Instruction manual available Transport dimensions (approx. dimensions): L: 205 cm W: 100 cm H: 120 cm approx. 1,000 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protective device from Aigner for clamping small parts during milling, etc. This protection device is often recommended by the BG. Except for a small milling in good condition. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".