milling machines used for sale

Working size 420x280x60cm With 4 spindles head  ... more information

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Gebr. Table milling machine with cross-cut saws STEHLE F3E Table size: 117 x 86.5 cm Table height: 85.5 cm Milling machine: Motor power: 4 kW 2 milling spindles: 30 + 40 mm Height adjustment via handwheel Height adjustment range of the milling spindle: 115 mm Left- and clockwise rotation 4 speeds: 3.0 / 5.0 / 6.0 / 10,000 rpm. Doubling the speed via selector switch Crosscut saws: Engine power: 3 hp (2.2 kW) max. saw blade diameter: 350 mm max. cutting height: 110 mm Lateral adjustment range: 120 mm Sliding carriage incl. slotted hood (self-made) Instruction manual available Transport dimensions (approx. dimensions): L: 205 cm W: 100 cm H: 120 cm approx. 1,000 kg Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.

x-travel: 800 mmy-travel: 500 mmz-travel: 610 mmControl: Fanuc type: 18 M table surface area: 1000x500 mmTool changer: 24 spindle taper ISO: 40 turning speeds: 8000 U/mintotal power requirement: kWweight of the machine ca.: 5,8 tdimensions of the machine ca.: 4,2x3,3x3,15 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Protective device from Aigner for clamping small parts during milling, etc. This protection device is often recommended by the BG. Except for a small milling in good condition. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With brush and feed wedge Obviously hasn't been used much so far. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

x-travel: 900 mmy-travel: 630 mmz-travel: 500 mmtable-size: 1200 x 600 mmspindle taper ISO: 40 turning speed range: 20 - 6300 U/minfeeds longditudinal/cross/vertical: 2 - 4000 mm/minrapid motion -longitudinal/cross/vertical: 10/10/8 m/minnumbers of positions in the tool changer: 22 quill stroke: 100 mmtotal power requirement: 20 kWweight of the machine ca.: 5,7 tdimensions of the machine ca.: 4 x 3 x 2,4 melectronic hand wheel: cooling equipment: Please notice:We would be happy to make you a free offer. However, please understand that weonly process inquiries with complete address details.in condition from seller!33.01 392with CEE plug and cable3-D trace control Heidenhain TNC 42522 fold toll changercolour graphicsvertical head with hydraulic tool clampingfix tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Holzher EVOLUTION 7405 Machining Center 6 blade changer Machine is in excellent condition ... more information

Rehnen KBA edge processing machine for grinding, profile milling and profile grinding of edges in one pass Pre-milling unit., processing aggregates: 6, feed: infinitely variable, Connected load: 10 kW, Min. workpiece thickness: about 10 mm, Max. workpiece thickness: approx. 110 mm, Aggregate 1: Pre-milling, Aggregate 2: grind, Aggregate 3: Rounding milling machine above, Aggregate 4: Rounding milling machine below, Aggregate 5: Profile milling machine below, Aggregate 6: Profile grinding below

Frezarka górnowrzecionowa Samco ROUTER Spindle distance from arm 800 mm Spindle driving motor 3/2.2 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-045 degree Height-adjustable table Spindle control pneumatically from the pedal Worktop size 800×600 mm  ... more information

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)  ... more information

Vacuum pump Becker Type VT 3.40 Machine No. D1180485 Built in 1991 Speed 1420 rpm. Suction volume 40 m³/h Suction pressure -900 mbar Motor power 1.25/1.5 kW  ... more information

Type MX5117B+V-480 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 394 kg Price 2490 Eur (EXW Jonava, Lithuania)

Type MX5117B+V-380 Work table dimensions 1130x670 mm Spindle speed diameter 35 mm Spindle rotation speed 6000-8000-800-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets 200x65, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 391 kg Price 2360 Eur (EXW Jonava, Lithuania)

Type MX5116T+ V-480 Work table dimensions 1100x700 mm Sliding table 1085x250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-4 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 469 kg Price 3190 Eur (EXW Jonava, Lithuania)

Type MX5116T+ V-380 Work table dimensions 1100x700 mm Sliding table 1085х250 mm Diameter of spindle 35 mm Spindle rotation speed 6000-8000-8000-10000 rpm Max. working thickness 120 mm Motor power 4 kW Dust exhaust outlets Ø90, 200x80 mm Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Transport dimensions 1650x700x1600mm Weight 466 kg Price 3060 Eur (EXW Jonava, Lithuania)

Brand: Sicar Type: Wood milling bench + extraction Model: SF70 Chassis number: BO400062003 Construction year: 2003 Weight: 0,28 tons Length mm: 2500 Width mm: 1000 Height mm: 1700 Transport size L x W x H: 2,5 x 1,0 x 1,7 Condition machine : Good  ... more information

Table dimensions: 800 x 1.180 mmMotor output: 5/6 kWSpindle diameter: 30 mmreus: 3/4,5/6/9.000 U/minheight adjustment: 150 mm: Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

- with swivel milling spindle - Three-phase motor 6.5/8.0 kW f. 6 speeds 1500/2250/3000/4500/6000/9000 rpm. - Electronic digital displays incl. 2 separate rotary switches for electr. Height and swivel adjustment of the milling spindle (rapid and creep speed in all directions) -Push button for electric upward movement - Milling fence with fine adjustment and Steel Stop Jaws Specifications: Table size 1350 x 800 mm Table height 870 mm Swivel range -5 degrees to +45 degrees Height adjustment approx. 150 mm Mandrel 30 mm, MK 5 Suction nozzle 120 mm diam., 2 pieces Dimensions (LxWxH) 1400 x 1300 x 1150 mm Weight 950 kg. incl. Holz-Her 4-roller feeder (8 speeds), Aigner table extension and stop for insertion milling.

Stair stringer milling machine, router, groove milling machine, stair stringer milling machine -2x stair stringer milling devices -hardened guide shafts -complete stop system -Max. Intermediate dimensions: 1550 mm -Table dimensions: 4000 x 1900 mm -Table height: 770 mm -Spindle motors: 1.1 kW 2780 rpm -Spindle stroke: 60 mm -Transport dimensions: 2000/800/H800 mm -Weight: approx. 250 kg