milling machines used for sale

Y axis drilling: 920 mm; Y axis saws: 860 mm; X axis: 3000 mm; Z axis: 12 mm - 40 mm; A axis: 360 Â; min. plate dimensions: (X) 300 mm x (Y) 120 mm x (Z) 12 mm; Feed speed: 20 m/min; Drill bit: 5mm/20mm/35mm; Milling tool: 8 mm; Groove saw: 90 mm x 3.5 mm; Maximum groove depth with saw blade: 10 mm; min. hole diameter: 3 mm; max. hole diameter: 35 mm; Motor power: 1.3 kW; Weight: 500 kg; CNC drilling machine with 4-position drill chuck and saw bladeThe saw runs over the X-axisCentral lubrication stationoperation via built-in Windows PCCad Cam Software

Description: Supplied with: A graduated swivel square (45°-0°-45°) for angled work Anodized aluminum profile with a meter Sliding stop Workpiece stop arm Useful stroke: 600 mm Approx. Onsite Dimension. (l x w x h): 930 x 330 x 400 mm, weight approx.: 52 kg ... more information

Description: It comes with: A graduated swivel square (45°-0°-45°) for angled work Anodized aluminum profile with a meter Sliding stop Workpiece stop arm Useful stroke: 600 mm Approx. Onsite Dimension. (l x w x h): 930 x 330 x 400 mm, weight approx.: 52 kg ... more information

Description: Engine power HP (KW) 3 (2.2) Table length 580 mm Table width 300 mm Maximum length of the mortising drill 250 mm Maximum depth of the mortising drill 170 mm Vertical stroke 200 mm Wescott drill chuck range Ø 0 - 20 mm Spindle speed 2800 rpm Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,550 mm, weight approx.: 180 kg

CNC machining center Biesse Rover A1542 Year of production 2021 Working fields : X = 4140 mm Y = 1560 mm Z = 275 mm C = 360 degrees 8 pcs. of ATS beams - 24 carriages 8 pcs. Rear line bumper, stroke 115 mm, extension 25 mm 8 pcs. Middle line bumper, mounted at 685 mm, stroke 140 mm 8 pcs. Front line bumper, stroke 1348 mm, extension 140 mm. 4 side bumpers with 140 mm stroke (2 left + 2 right) including pneumatic installation. 4 removable center bumpers with 140 mm stroke (2 Left + 2 Right) including pneumatic installation. BUSCH pump with a capacity of 290 m3/h Electro-spindle 13.2 kW (17.7 hp) HSK F63 and air cooling BH 29 2L drilling head with automatic lubrication. 16-position turreted tool magazine mounted on X-axis carriage 8-position magazine for quick tool change In addition, HSD angle aggregates The machine has only 2000 hours of operation

4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible ... more information

Motor power: 26,0-kW Year of construction:2020 Motor voltage:3x 400 V motor frequency:50 Hz Working field: X= 3090 mm, Y= 2100 mm, Z= 85 mm 3 different vacuum table zone DH8 cutting head 2 vacuum pump with a total suction of: 500 m³/h / 50Hz; Electro-pneumatic shaft 10 kW HSK F63 ... more information

Working dimensions 2750 x 1220 mm (X,Y) Main spindle 6 kW Drills 12V, 2+4 H Grooving saw 100mm in X axis Tool tray 6 places woodWOP 5.0 software CNC Simulator The machine had a regular service Laser cross for placement of suction cups Incl. documentation and backup SW ... more information

Classifieds Home & Garden DIY Your Ad Visits: 17 Wishlist: 0 Ends on: 26.05.2024 Edit Reserve Lengthen Delete Print a sales sign Highlight Ad Duration Price Push up Get new attention! Your ad will look like a new ad. one-time 3,95 € Highlight: Up to 2x more visibility! Your ad will be highlighted in color. 7 days 4,95 € Up to 5x more visibility! Your ad will be pushed up every day for a week. 7 days € 16.95 Up to 10x more visibility! Your ad is at the top of the list! 7 days € 19.95 Gallery: Up to 15x more visibility! Your ad will appear on the home page! 10 days € 49.95 All prices incl. VAT. Swivel Spindle Milling Machine FELDER F38 Rotary Milling Machine Table Milling Machine Feed in Langenbach Swivel Spindle Milling Machine FELDER F38 Swivel Milling Machine Table Milling Machine Feed €5,652 Pick-up only  ...

Technical details: - Mortise depth: 150 mm - Max. slit length: 220 mm - Max. chain width: 40 mm - Longitudinal table movement: 160 mm - Table transverse movement: 90 mm - Inclination: 5° - with 1 x chain (mounted) - with sheet steel stand - with oil lubrication device - with quick adjustment - with instruction manual Engine data: - Three-phase motor, consumption: 2.2 kW - Power, output: 1.5 kW - Voltage: 220/380 V - Current: 6/3.5 A - Frequency: 50 Hz - Speed: 2,800 rpm Dimensions (LxWxH): Transport dimensions: Machine weight: 72 kg Weight of sheet steel stand: 35 kg The machine has been completely cleaned, overhauled and checked for correct functioning. It is supplied with a mounted connection cable with a 16A three-phase plug. (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we wo ...

Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...

Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief.  ...

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and erro ...

COPY SHAPER machine PADE UINZE 2300 2T second hand machine machine for simultaneously shaping both sides of the treated piece of wood. the machine is suitable for the production of chairs, tables, beds, armchairs and furniture elements in general. technical details : machine composed by 2 units : 1+1 shaper units . motor power Hp 5,5 each one max. working useful length mm.2500 max. working width mm. 360 max. working heigth mm. 160 speed rotation shaper units rpm 8500 hydraulic carriage forward speed mt./min. 0 / 25 hydraulic carriage return speed mt./min. 40 hydraulic pump motor power Hp 5,5 net weigth kgs.2600 volt. 380/50

mitre moulding machine with moulding unitsmax workpiece dimensions: 2600 x 550 mmportal machine with 3double units and 2 single units on the sidemotors: 8 x 1,5/2,2 kW 50Hz/100Hzworkpieces are hold with vacuumautomatic movement of the table ... more information

Working piece thickness (Radius) ca. 16 - 55 mmWorking piece thickness (Chamfer) ca. 12 -55 mmWorking piece width min. Ca. 30 mmInner radius min. Ca. 35 mm (depending on edge-radius and workingpiece countours)Edge thickness max. ca. 3 mmMilling motor 2 x 0,4 kW, 10950 o/min.Dust extraction 1 x diam. 80 mmWorking height 900 mmRadius 3 mm tooling

max. edge thickness: approx. 3 mmmax. workpiece height: approx. 50 mmmin. Internal radius of panel: approx. 40 mm2 motors each 0,37 kWCombined tooling chamfer and radiusMilling speed : 12000 rpmWork table height: 865 mmRadius 3 mm tooling ... more information

Static contour trimming machine for rounding off edges to softformed or postformed panels.The machine has a tracing roller and a trimming motor and carries out both symmetric and asymmetric copying work (by means of plc controlls).For the finishing a polishing brush has been built up additionally.Max. workpiece thickness: 55 mm.Max. workpiece width: 80 mm.Max. profile depth 80 mm.Max. edges thickness: 3 mm.Motor: 0,5 kW.

min and max tenon width: 4-100 mm + thicknessmin and max tenon thickness: 4-30 mmmin and max tenon depth: 6-80 mmTable adjustments: vertical: 120 mmhorizontal: 60 mmfront tilting: 20?scale fence on table for miter positioning: 45?cutter spindle motor: 3kwmotor for drum rotation: 0,75kWrotation speed of drum adjustable

Max tenon width: 100 mm + thicknessMax tenon thickness: 30 mmMax tenon depth: 50 mmTable adjustments: vertical: 100 mmtilt on both sides: 15?/0?/-15?front tilting: +5?/-20?guide on table for mitre positioningcutter spindle motor: 3,7 kWmotor for drum rotation: 0,4 kWdust extraction: 2 x 100 mm ... more information