injection moulding machines used for sale

Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. ... more information

There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible. ... more information

We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.

 ... more information

screw size:45 mminjection shot weight in Polysterol:149 g/PSclosing pressure:1250 kN ... more information

Description: Serial number 171 - 101 Model M 171 Designation EUROMAP 800H - 160 Maximum power 50 kW - 400 V - 50 Hz Rated current 75 A Interrupting capacity <,10 kA  ,Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 5,000 kg ... more information

Injection weight: 20 g Closing force: 250 kN State: Used Screw diameter: 18 Injection pressure: 2500 Column spacing: 270 x 270 Size of plates: 380x380 Min mold height: 200 Control type: Selogica Language: German Installed power: 35 Working hours: 82,985 Libra: 2100 Dimensions: 3 x 1.1 Feed hopper: NO Core String: Yes Robot socket: Yes

Description: seriennummer 220425 machine operating hours: 6685 robot operating hours: 7379 Locking force 400 tons Barrel volume 1810 cm3 Screw diameter 80 mm Spec pressure 2300 bar Tie bar distance H/V 800mm/800mm Tie bar diameter 400mm Plate dimensions H/V 1100mm/1190mm Mold height min/max 1250mm Opening 1700mm Ejection stroke/force max. 250mm/95kn Centering diameter 160mm Fixing of molds fixare cu bride clamping force: 4000 kN, 440 US tons cistance between tie bars 810 mm x 810 mm  , , , , , ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,screw diameter: 70 / 89 / 90 mm sequentille Core units 4 hot run 8 Type loocking Robot type Viper 60 /6 axe , ,  ,  ,  ,  , &nb ...

Manufacturer : ENGEL Model: 180T VICTORY 650 POWER Year of manufacture: 2005 Working hours: 38,654 hours Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bar Closing force: 1800 kN Mini /Max Mold Thickness: 300-750 mm Passage between columns: 860 x 830 mm Central ejection 3 Cores robot interface PROCESS CC200

Clamping unit Clamping force50 ton Opening stroke350 mm Distance between tie bars320 X 320 mm Mould height min.300 mm Mould height max.550 mm Platen size (h x v)446 X 446 mm Injection unit Screw diameter30 mm Injection volume85 cm³ Shot weight75 g Injection pressure2200 bar Measurements and weight Dimensions3,25 x 1.15 x 2,0 m Machine weight2250 kg

Clamping unit Clamping force420 ton Opening stroke770 mm Distance between tie bars820 X 820 mm Mould height min.380 mm Mould height max.825 mm Platen size (h x v)1200 X 1100 mm Injection unit Screw diameter60 mm Injection volume890 cm³ Shot weight810 g Injection pressure2420 bar Measurements and weight Dimensions8,2 X 2,2 X 2,4 m Machine weight22300 kg Additional information & extras Core pull4 pcs Robot ProducerRemak Year2008

Clamping unit Clamping force50 ton Opening stroke300 mm Distance between tie bars370 x 370 mm Mould height min.200-400 mm Opening width500-700 mm Platen size (h x v)510 x 510 mm Injection unit Screw diameter25 mm Injection volume59 cm³ Shot weight54 g Injection pressure2500 bar Measurements and weight Dimensions4,2 x 1,5 x 2,1 m Machine weight3740 kg Additional information & extras Core pull1 pcs Accumulator1 pcs Robot ProducerSepro TypeSR 55 Year2020 Weight56 kg

Description: SPECIAL EQUIPMENT increased locking pressure 50m, t., large injection unit 210 Screws D =35mm injection weight in PS 120gr.Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,750 mm, weight approx.: 2,100 kg ... more information

Description: only approx. 35,000 operating hours very good condition as can be seen in the pictures Machines that come from the seller who do not allow anyone into their production for espionage reasons or do not allow any contact with the staff, can only be handed in with the note 'No information about completeness and function' untested.Without operating instructions.However, operating instructions can be copied from other machines.Approx. Onsite Dimension. (l x w x h): 4,000 x 1,400 x 1,750 mm, weight approx.: 1,900 kg

Description: Test device between centers Center width approx. 400mm Center height 90mm one tailstock horizontally adjustable the other horizontally and vertically very well preserved but rusty due to long storageApprox. Onsite Dimension. (l x w x h): 600 x 150 x 200 mm, weight approx.: 15 kg ... more information

Description: Device for spraying into the _parting plane is somewhat dirty and rusty due to long storageApprox. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 20 kg ... more information

Clamping force: 200 t Year of construction: 2007 Injection weight in PS: 127 g Injection unit: .../350 Screw diameter: 35 mm Spec. Injection pressure: 2500 bar Spray volume: 139 ccm Injection weight in PS: 127 g L/D screw ratio: 23 Clamping unit: 2000/... Clamping force: 200 t Size of clamping plates: 728 x 728 mm Lights spar spacing: 520 x 520 mm Ejector force: 66 kN Aperture travel: 650 mm Max. plate spacing: 900 mm Ejector travel: 225 mm Fuel tank capacity OIL: 290 l

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Year of construction: 1987 Injection weight in PS: 24 g Control type: Dialogica Injection unit: .../45 Screw diameter: 22 mm Injection weight in PS: 24 g Clamping unit: 150/... Lights spar spacing: 170 x 170 mm Aperture travel: 200 mm Max. plate spacing: 350 mm Ejector travel: 75 mm ... more information

Clamping force: 320 t Year of construction: 2007 Injection weight in PS: 131 / 131 g Injection unit: .../800 / 350 Screw diameter: 35 / 35 mm Spray volume: 139 / 139 ccm Injection weight in PS: 131 / 131 g Clamping unit: 320/... Clamping force:: 320 t Lights spar spacing: 720 x 720 mm Tool installation height: 300...1400 mm Ejector travel: 250 mm General information: Delivery Time: Natychmiast Weight: 17,000 kg Dimensions(m) LxWxH: 6.83 x 2.25 x 2.50 m Instrumentation: 1 x 8-speed water battery 1 x 12-speed water battery 1 x 4-way water battery 3 x hydraulic core pull control 4 x Air Valve Robot interface according to EUROMAP 67