Manufacturer:
(Category: 301)
Clamping force: 320 t Year of construction: 2007 Injection weight in PS: 131 / 131 g Injection unit: .../800 / 350 Screw diameter: 35 / 35 mm Spray volume: 139 / 139 ccm Injection weight in PS: 131 / 131 g Clamping unit: 320/... Clamping force:: 320 t Lights spar spacing: 720 x 720 mm Tool installation height: 300...1400 mm Ejector travel: 250 mm General information: Delivery Time: Natychmiast Weight: 17,000 kg Dimensions(m) LxWxH: 6.83 x 2.25 x 2.50 m Instrumentation: 1 x 8-speed water battery 1 x 12-speed water battery 1 x 4-way water battery 3 x hydraulic core pull control 4 x Air Valve Robot interface according to EUROMAP 67
Clamping force: 200 t Year of construction: 2002 Injection weight in PS: 72 / 45 g Control type: Selogica Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 x 570 mm Ejector travel: 225 mm General information: Weight: 8000 kg Dimensions(m) LxWxH: 5.1 x 1.8 x 2.2 m • 2 x Hydraulic Core Pull • 1 x Air Valve Snail: Top/Vertical: 30mm Bottom/Horizontal: 25mm
This ENGEL Victory 2050H/650v/350 Combi injection moulding machine was manufactured in 2015. It boasts significant capabilities with a clamping force of 350 tons and an injection pressure of 1480 bar. The machine offers a maximum injection volume of 808.17 cm³ horizontally and 294.52 cm³ vertically, enhancing its versatility. Additionally, it is equipped with special accessories like Valves + control, an Index plate, and a Viper robot 40 for automated removal. Reach out for more information about this injection moulding machine.
This HAITIAN MA 7000/6800 injection moulding machine was manufactured in 2011. It features a robust injection capacity of 3228 grams and an impressive maximum injection pressure of 1860 Bar. The machines mold clamping force reaches up to 700 tons, supporting mold thicknesses from 400 mm to 940 mm. The spacing between tie bars is a generous 1840 mm. Consider the HAITIAN MA 7000/6800 machine we have for sale. For more information about this injection moulding machine, please reach out to us.
KRAUSS MAFFEI KM 125-520C1 (1998) Clamping force: 1250 kN Mold opening force: 70 kN Traversing force opening/closing platen: 35/28 kN Clamping platen (hxv): 745 x 770 mm. Clear width (hxv): 470 x 470 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 10 kN Injection unit: SP520 Screw diameter: 45 Ls/D Ratio: 20 Injection pressure: 1878 bar. Swept volume: 275 cm3 Shot weight PS: 250 gr. Injection flow: 159 cm3/s Screw speed. Standard/ZE: 307/391 1/min Plasticizing flow: 31/40 Pump motor rated output: 18.5 kW Installed heating capacity: 13 kW Control zones, barrel heating: 5 Dry cycles: 1900 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 6.000kg Length x Width x Height: 4.48 x 1.51 x 2.19 m. Max mold weight: 1485 kg. Plasticizing u ...
KRAUSS MAFFEI KM150-1000C1 (2000). Clamping force: 1500kN Mold opening force: 86 kN Traversing force opening/closing platen: 45/34 kN Clamping platen (hxv): 780 x 790 mm. Clear width (hxv): 500 x 500 mm. Mold opening stroke: 600 mm. Mold installation height min: 300 mm. Maximum daylight: 900 mm. Ejector stroke: 150 mm. Ejector force forward/back: 22/10 kN Injection unit: SP1000 Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 532 cm3 Shot weight PS: 476 gr. Injection flow: 197 cm3/s Screw speed. Standard/ZE: 194/272 1/min Plasticizing flow: 35/49 Nozzle contact force: 110 kN Pump motor rated output: 30 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Dry cycles: 1800 (Euromap 6) Oil filling: 345 l. Dimensions: Net weight with control cabinet: 7600 kg Length x Width x Height: 4.99 x 1.51 x 2.19 m. Max mold ...
KRAUSS MAFFEI KM200-1400C1 (2001) MC4 control Clamping force: 2000 kN Mold opening force: 101 kN Traversing force opening/closing platen: 42 kN Clamping platen (hxv): 915 x 915 mm. Clear width (hxv): 560 x 560 mm. Mold opening stroke: 700 mm. Mold installation height min: 350 mm. Maximum daylight: 1050 mm. Ejector stroke: 200 mm. Ejector force forward/back: 28 kN Injection unit: SP51400 Screw diameter: 60 Ls/D Ratio: 21 Injection pressure: 2000 bar. Swept volume: 679 cm3 Shot weight PS: 618 gr. Injection flow: 325 cm3/s Screw speed. Standard/ZE: 259/368 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 23 kW Control zones, barrel heating: 5 Dry cycles: 1400 (Euromap 6) Oil filling: 525 l. Dimensions: Net weight with control cabinet: 10.500kg Length x Width x Height: 5.69 x 1.90 x 2.24 m. ...
KRAUSS MAFFEI KM250-1000C1 (1998) Clamping force: 2500 kN Mold opening force: 160 kN Traversing force opening/closing platen: 86 kN Clamping platen (hxv): 995 x 1050 mm. Clear width (hxv): 630 x 630 mm. Mold opening stroke: 820 mm. Mold installation height min: 330 mm. Maximum daylight: 1150 mm. Ejector stroke: 200 mm. Ejector force forward/back: 58 kN Injection unit: SP1000C Screw diameter: 55 Ls/D Ratio: 20 Injection pressure: 1904 bar. Swept volume: 523 cm3 Shot weight PS: 476 gr. Injection flow: 428 cm3/s Screw speed. Standard/ZE: 65/80 1/min Plasticizing flow: 58/83 Nozzle contact force: 110 kN Pump motor rated output: 45 kW Installed heating capacity: 19 kW Control zones, barrel heating: 5 Oil filling: 720 l. Max mold weight: 3430 kg. Dimensions: Net weight with control cabinet: 12.500kg Length x Width x Height: 5.97 x 1.04 x 2.36 m
This ENGEL e-victory 740H/50W/220 combi + Viper 20 injection moulding machine was manufactured in 2016. It features dual injection units with maximum injection rates of 279.45 cm³/s and 103.67 cm³/s respectively, and high injection pressures up to 2400 bar. The clamping force is robust at 2200 kN, with a generous platen size for diverse mold sizes. Consider the ENGEL e-victory machine we have for sale. Contact us for more information about this injection moulding machine.
Description: Clamping force: 1,100 kN screw diameter 35 mm incl. discharge conveyor, Engel ERC 23/2-F handling robot Internal number: E 110/1 M2332 SN: 163486, incl. documentation Dimensions: Machine dimensions: (LxWxH): 5100 x 1580 x 2080 mm Wittmann W823-0240 Dimensions: (LxWxH): 2700 x 1350 x 2200 mm Conveyor belt on Euro pallet Dimensions: (LxWxH): 2120 x 800 x 880 Safety fence on Euro pallet Dimensions: (LxWxH): 2150 x 840 x 650 mm Carrier on Euro pallet Dimensions: (LxWxH): 2500 x 1300 x 900 mm Temperature control unit on Euro pallet Dimensions: (LxWxH): 1200 x 800 x 800 mmApprox. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 7,400 kg
Ref. no.: 18398Hersteller: DEMAGYear of construction: 2006Clamping unitClamping force: 160 tonOpening stroke: 500 mmDistance between tie bars: 520 X 520 mmMould height min.: 275 mmMould height max.: 585 mmOpening width: 1085 mmPlaten size (h x v): 770 X 770 mmInjection unitScrew diameter: 50 mmInjection volume: 399 cm³Shot weight: 360 gInjection pressure: 1550 barMeasurements and weightDimensions: 4,9 x 1,5 x 2,0 mMachine weight: 6720 kgAdditional information & extrasCore pull: 1 pcs
Manufacturer: Arburg Type: Allrounder 420 S 1000-350 Year of construction: 2000 Clamping force: 1000 KN Minimum tool installation height: 225 mm Maximum opening distance: 575 mm Screw diameter: 35 mm Maximum dosing volume: 139 cc Accessories: Helios granulate dryer, type Jetboxx E economy Flowbox Fa. Alpha ionstatex Protective enclosure with door (Bosch profile) for robot assembly Handle extension 200 mm Location: Seelbach We will be happy to send you further information on request.
This Arburg Allrounder 420 C 1300-350 injection moulding machine was manufactured in 1998. It features a clamping force of 1300 kN and offers screw diameters of 35, 40, and 45 mm, allowing versatile moulding capabilities. The machine includes a Schuma conveyor belt and optional Geiger Handling, enhancing operational efficiency. With a robust design and substantial injection pressures, its ideal for precise plastics processing. Consider the Arburg Allrounder machine we have for sale. Contact us for more information.
This Arburg ALLROUNDER 1200 T 800 - 70 Injection moulding machine was manufactured in the year 2017 in Germany and has 2090 pump hours. The machine has a clamping force of 800 kN, is in very good condition, and is well maintained. This Injection Moulding Machine is not CE certified and will be sold without CE Certification. It was part of an automation solution in one production cell. Being sold now as single machine it is ideal to integrate in an existing production line. The buyer is responsible for the required CE certification.
This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. In the current set up, the machine is not CE certified to work stand alone. There is a quote for retrofit the machine to have it CE certified for 3.000€
B&A REF: 8968 TON: 1000 SHOT WEIGHT: SCREW DIAMETER: 100MM STROKE VOLUME: 3925CM3 INJECTION PRESSURE: 1670AR PLATEN SIZES: 1800 X 1580MM DBTB: 1250 X 1000MM MIN MOULD HEIGHT: 500MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 1100MM MAX DAYLIGHT: 2300MM EJECTOR STROKE: 400MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP SCREW DRIVE: ELECTRIC
B&A REF: 8966 TON: 380 SHOT WEIGHT: 1190 SCREW DIAMETER: 70MM STROKE VOLUME: 1308CM3 INJECTION PRESSURE: 2400AR PLATEN SIZES: 1280 X 1280MM DBTB: 920 X 920MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: MM MOULD OPENING STROKE: 750MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 700MM CONTROLS: CC 200 TOUCH AIR VALVES: 1 MOTOR: ELECTRIC HEATING CAPACITY: 44KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: ELECTRIC
B&A REF: 9033 TON: 370 SHOT WEIGHT: 1060 SCREW DIAMETER: 70MM STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 990 X 1070MM DBTB: 630 X 710MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 22KW SCREW DRIVE: HYDRAULIC ROBOT INTERFACE: EUROMAP
B&A REF: 9002 TON: 250 SHOT WEIGHT: 340 SCREW DIAMETER: 45MM STROKE VOLUME: 374CM3 INJECTION PRESSURE: 2250AR PLATEN SIZES: 860 X 790MM DBTB: 590 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1200MM EJECTOR STROKE: 225MM CONTROLS: COLUMBIA CORE PULLING: 1 AIR VALVES: 1 MOTOR: 22 HEATING CAPACITY: 12KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC
- Column spacing [mm]: 710x660 - Maximum plate distance [mm]: 1360 - Injection weight [g]: 992 - Press force : 3500kN - Motor power : 40,9 kW - Power supply : 410 V 50 HZ - Screw size : B-D65 - Injection volume: 1078 cm3 - Total power : 67.15 kW - Current at full load : 113.8 A ... more information