- Injection molding machines (410)
- Injection molding machines for rubber (1)
- Injection moulding devices (3)
- Injection moulding tools (4)
- Injection moulding tools for plastics (3)
- Machines used for injection moulding (6)
- Multi component injection moulding machines (11)
- PET Machines (16)
- PET Preforming machines (11)
- Plastic injection machines (159)
- Precision injection molding machines (3)
- Special injection moulding machines (6)
- Withdrawal devices (1)
- more
- ABB (1)
- ACOPOS (1)
- AMADA (1)
- Arburg (338)
- ARBURG 320T (1)
- ARBURG ALLROUNDER 920H (1)
- ASIAN PLASTIC MACHINERY (1)
- Asian Plastics Machinery (3)
- Battenfeld (104)
- BATTENFELD BCT (1)
- BEYELER (1)
- BILLION (21)
- BM BIRAGHI (1)
- BM-BIRAGHI (1)
- BMB (15)
- BMB COSTRUZIONI OLEOMECCANICHE (1)
- Borche (4)
- Borel (2)
- Boy (25)
- BUCHER GUYER (1)
- BUSCH (1)
- CINCINNATI (1)
- CMEC-HY (1)
- CRONOPLAST (1)
- Demag (159)
- Demag Ergotech (15)
- DEMAG EXTRA (1)
- Desma (2)
- Dr. Boy (17)
- DR.BOY (1)
- EKOU INDUSTRIES CO. (1)
- ELWIK (2)
- Engel (197)
- ENGEL 3550/700 DUO (1)
- ENGEL 3550/800 DUO (1)
- ENGEL 4550/700 DUO (1)
- ERLHOFF (1)
- EVERPLAST MACHINERY (1)
- FANUC (1)
- FANUG (1)
- FCS (3)
- Ferromatik (29)
- FERROMATIK DESMA (1)
- Ferromatik Milacron (21)
- FOSTAG (1)
- FUCHUN SHIN MACHINERY MANUFACTURE CO., (1)
- GBF (1)
- Haitian (13)
- HEATMASTERS (1)
- HPM (2)
- HRS (1)
- HSI (1)
- HT MIR (1)
- HTW (1)
- HURMAK (1)
- HUSKY (31)
- HUSKY HMI (1)
- HUSKY HUAYAN (2)
- Husky Injection Systems (2)
- INTEC-OTTOGALLI (1)
- INTRON (1)
- Italtech (4)
- JSW (11)
- KLOECKNER DESMA (1)
- Krauss Maffei (159)
- KRAUSS MAFFEI (2K) (1)
- KRAUSS-MAFFEI (4)
- KraussMaffei (8)
- LEADWAY (1)
- LG (1)
- LGH (1)
- LS (3)
- LS Machinery (4)
- LS MITRON (1)
- LS MTRON (1)
- LWB STEINL (1)
- MAINGROUP (2)
- MANNESMANN DEMAG (1)
- Maplan (2)
- MATSUI (1)
- MECCAPLASTICA (1)
- METALMECCANICA-PLAST (1)
- MILACRON (2)
- MITSUBISHI (1)
- NEGRI BOSSI (26)
- NEGRI BOSSI SACMI (1)
- NEGRI-BOSSI (1)
- NegriBossi (2)
- Netstal (35)
- NETSTAL 550T (1)
- NETSTAL-MASCHINEN (1)
- Nissei (2)
- NPM (1)
- OIMA (1)
- OZYILMAZ(TURKISH) (1)
- PLASTAK ENGINEERING (1)
- PM (2)
- PONAR ZYWIEC (3)
- POTVEL (1)
- PROMASS (1)
- ... more
Manufacturer:
(Category: 301)
New in: 1999
used
With documentation, the machine should be tested. ... more information
New in: 2022
used
Clamping force: 3200kN, distance between tie bars: 720x720mm, injection unit: 800, screw diameter: 45mm, with documentation. The machine is immediately available, complete and ready for shipment. There are no known defects. The machine has an Arburg Multilift, a parts conveyor belt and the safety fence. The machine is not equipped with the cooking systems (dryer + mixer). The machine is as good as new and was stored directly after leaving the Arburg factory, operating hours max. 100h only test run at Arburg. Machine does not have to be dismantled as it is still in delivery condition. On-site inspection is possible.
New in: 2009
used
Clamping force: 3000kN, screw diameter: 50mm, stroke volume: 471cm³, heating output: 30kW, length: 7100mm, width: 2200mm, height: 2600mm, weight: 16.8t, operational hours counter: 58,222h, with documentation. ... more information
New in: 2003
used
Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. ... more information
New in: 2008
used
Max. closing force: 80t, min. installation height: 200mm, max. opening stroke: 450mm, tie bar distance: 370mm, cylinder diameter: 30mm, connected load: 24.4kW, weight: 3.7t. ... more information
New in: 2005
used
Closing force: 550kN, opening stroke: 400mm, mould height: 250-650mm, column distance: 360x335mm, max. ejector stroke: 80mm, table dimensions: 565x540mm, max. tool weight: 600kg, screw diameter: 38mm, controls: Procan MD, length: 3250mm, width: 1140mm, height: 2040mm, weight: 2.25t, operational hours counter: 29,664h, with robot interface.
New in: 2007
used
Hydraulic operating pressure: 275bar, weight: 4.1t. ... more information
New in: 2001
used
Connected load: 42kW. ... more information
New in: 1997
used
Connected load: 40kVA. ... more information
New in: 1995
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t. ... more information
New in: 2016
used
Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible. ... more information
New in: 1999
used
Closing force: 800kN, screw diameter: 30mm, shot weight: 19.1-63.6g, operational hours counter: 54,185h, with documentation, without accessories or spare parts, was maintained regularly, an inspection is possible, but not under power. ... more information
New in: 2011
used
Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press
New in: 1986
used
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
New in: 2013
used
Description Electric charge Working hours: 6.300 ... more information
New in: 2002
used
Weight: 9.1t, the machine is leaking and the control card is missing. ... more information
New in: 2004
used
New in: 2004
used
Injection force: 113kN, closing force: 500kN, opening path: 50mm, weight: 4.4t, with documentation and software. ... more information
New in: 2001
used
New in: 1998
used
Operational hours counter: 59,129h, with Handling PSA 2080. ... more information