injection moulding machines used for sale

included Sepro, with accumulator - Distance between tie-bars (h x v): 630 x 630 mm - Air Valves: 1 - Screw diameter: 60 mm - Shot weight max: 694 g - Injection pressure: 2.144 bar - Injection volume: 763 cm? - Clamping force: 1.750 kN - Mould height min: 295 mm - Daylight between platens max: 750 mm - Heating zones: 4 - Platen size (h x v): 1.035 x 970 mm - Ejector force: 0 kN - Control: IQT6 - Core pulls: 1 - Operating hours: 82.000 - Power: installed max: 55 + 29,3 kW - Weight: 11.200 kg - Dimensions (long x wide x high): 6.900 x 2.000 x 2.600 mm

Arburg 221M 350-75 Year of construction: 1996 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Injection pressure: 1570 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 221 mm Size of clamping plates: 342x250 mm Ejector: hydraulic Control: MULTRONICA Additional equipment: Metrics: Weight: 1300 kg Length/width/height: 0x0x0 m Drive: Pumps/motor: 7.5 kW Heating capacity: 4 kW Total power: 11.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

1996 Arburg Allrounder 320 M 500 - 90, 50 t Clamping force 50 t Screw 30 mm Mold height min 250 mm Distance between tie bars 320 mm Mould weight max 0,6 t Shot capacity 71 cmm Control Multronica Core pullers - no Hotrunner zones - no Weight 2360 kg, L x W: 4100 mm x 1200 mm year of made 1996 stock number 00660 accessories - no (in price of machine is not hopper loader on photo, but is possible to buy it)

Battenfeld Plus 350/75 Year of construction: 1996 Injection unit: Screw diameter: 22 mm Spray weight: 34.5 g Injection pressure: 2034 bar Dosing volume: 38 ccm Clamping unit: Clamping force: 35t Tie bar spacing: 270 mm Size of clamping plates: 470x280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG 1020 Additional equipment: Metrics: Weight: 1050 kg Length/Width/Height: 2.24x0.88x1.70 m Drive: Pumps/motor: 7.5 kW Heating capacity: 2.76 kW Total power: 10.26 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +1. Aggregat+ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +2.Aggregat+ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm inj ...

B&A REF: 8980 TON: 200 SHOT WEIGHT: 502G SCREW DIAMETER: 55MM STROKE VOLUME: 546CM3 INJECTION PRESSURE: 1450AR PLATEN SIZES: 770 X 770MM DBTB: 510 X 510MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 550MM MAX DAYLIGHT: 1180MM EJECTOR STROKE: 190MM CONTROLS: SEF 100 CORE PULLING: 2 AIR VALVES: 1 ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Injection molding machine ARBURG ALLROUNDER MULTRONICA 100T Parts ARBURG ALLROUNDER MULTRONICA (1996) Model 420 M 1000 - 250 MOOG double pump unit with lantern and cradle (2015) MULTRONICA control cabinet Complete injection unit + heating + pontoon chassis Complete engine assembly with lantern

Krauss Maffei KM 350-2700 C1 Year : 1996 Weight 19000 kg Clamping force : 3500 kN Voltage : 230 Minimum moulding size in mm : 380 mm Mould opening size : 920 mm Tie bar distance : 710 x 710 mm Maximum produce parts with a shot size : 1433 ccm / 1304 gramm Oil to fill in : 740 l Hours of Production : 87,230 Condition : very good Special features : 4 pcs. hydraulic core pull 2 pcs. air valves hot runner 16 zones color feeder connectivity option

Clamping force [kN] 800 Dimensions of mounting plates (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 25 Injection volume [cm3] 52 Injection weight [g] 47 Injection pressure [bar] 2500 Dimensions and weight Net weight with control cabinet [t] 2.2 Dimensions (L x W x H) [m] 3.3 x 1.2 x 1.9

Producer ARBURG Type 270 S 250-60 Year 1996 Clamping unit Clamping force 25 ton Distance between tie bars 270 X 270 mm Mould height min. 200 mm Opening width 275 mm Platen size (h x v) 400 X 400 mm Injection unit Screw diameter 22 mm Injection volume 30 cm³ Shot weight 25 g Injection pressure 2350 bar Measurements and weight Dimensions 2,85 X1,2 x 1,9 m Machine weight 1900 kg

I have to sell Injection moulding machine Arburg 420M 1996 23500 hours. The machine is great condition with brand new oil 08.2020 Can see to work at anytime. ... more information

Engel 330/90HL injection press Year 1996 Engel brand injection press. The machines are not powered on, they are stored in a warehouse while waiting to find a buyer. Clarification: they were all in perfect working order before being moved. There are 5 machines: - an 80 ton - a 110 ton without columns - a 145 ton - a 250 ton - a 420 ton Model Year between 1988 and 1994 (EC 88/CC90 cabinet)

Negri Bossi NB 250 Injection Moulding Machine power output: 79kw Dimensions: 620014002000 weight: 10,560 kg screw size: 60 mm column spaces: 460460 mm plate dimensions: 860860 mm ... more information

Injection molding machine Brand Negri&Bossi Nb 40 400 h - 115 year 1996 pres.idr.max 150 power kw 11 -- hz 50 -- volts 380 ... more information

Description ROTARY TABLE: DIAM. 700 mm ... more information

Description HOT ROOMS 4 ZONES PREPARATION FOR 8 MOLD SHUTTERS 2 EUROMAP 12 INTERFACE SOCKETS PNEUMATIC FRONT GATE CLOSURE ... more information

Netstal Type: Synergy 900/230 Built: 1997 Closing unit Clamping force t: 90 Opening path mm: 0-350 Holm size mm: 410 x 410 Installation height min/max mm: 450/750 Spraying unit Screw diameter mm: 35 Spray weight gr: 118 Spray volume cm3: 123 Spray pressure bar: 1830 Dimensions and weights Dimensions LxWxH m: 5.4 x 1.8 x 2.2 Machine Weight Kg: 6000 Other Euromap 12 Interface