Manufacturer:
(Category: 301)
Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine ... more information
1993 model husky xl 300 pet injection engine (full revision) 1997 model Piovan raw material dryer 1999 model Fasti mold drier Robot and conveyor Some pet preform moulds ( New ) Full automatic, in excellent condition ... more information
Closing unit Clamping force t: 200 Opening path mm: 650 Holm size mm: 520 x520 Installation height min/max mm: 350 Plate size: 820 x 820 Spraying unit Screw diameter mm: 820 x 820 Spray weight gr: 440 Spray volume cm3: 510 Spray pressure bar: 1910 Dimensions and weights Dimensions LxWxH m: 5.5 x 1.3 Machine Weight Kg: 10000 Other Battery Euromap 12
Clamping force kN 2400 Mould thickness mm 460-800 Opening stroke mm 0-510 Distance between tie-bars V/H mm/mm 630/630 Stroke, injection unit mm 550 Nozzle contact force KN 78 Screw diameter mm 60 Injection pressure bar 1534 Max. injection volume cm3 565 ø centring ring mm 160 ø mould release bar (=standard) mm M16-M20 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M20 Robot Yes
SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage
Manufacturer Engel Type ES7000/1100 CC100 Control CC 100 Built in 1994 Closing unit Closing force t 1100 Opening path mm 1400 Holm size mm 1420 x 1170 Installation height min/max mm 600/1200 Plate size 1990 x 1740 Spraying unit Screw diameter mm 105 Spray volume cm3 3850 Spray weight gr 3740 Spray pressure bar 1650 Dimensions and weights Dimensions LxWxH m 12.6 x 3.7 x 2.6 Machine weight Kg 89000 Other robot ENGEL ERC 73/1-ST Core pulling: 2 pcs Euromap 12
Molding machine of Mag Type: Ergotech 25-80 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 25 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 105 /. Plate size: 390 x 390 Injection unit Screw diameter mm: Gr 22 injection weight: 37 Injection volume cm m³: 42 Injection pressure bar: 2061 Dimensions and weights Dimensions Lxwxh m: 3 x 1.05 x 1.9 machine weight kg: 1550
emag injection molding machine Type: Ergotech 80-310 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 80 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 3.9 x 1.4 x 1.9 machine weight kg: 3600
Clamping force: 50 t Tool height: 210 mm Opening distance: 400 mm Platten dimensions: 520 x 520 mm Clearance between tie bars: 355 x 355 mm Screw diameter: 30 mm Specific injection pressure: 1990 bar Injection volume: 106 cm3 Shot weight: 94 g Dimensions(m) LxWxH: 3.7m x 1.4m x 1.8m Weight: 2900 kg Condition: working
B&A REF: 8983 TON: 380 SHOT WEIGHT: 1310G SCREW DIAMETER: 75MM STROKE VOLUME: 1370CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1140MM EJECTOR STROKE: 240MM CONTROLS: SEF 100 AIR VALVES: 1 CORE PULL: 2 SCREW DRIVE: HYDRAULIC
INJECTION UNIT Screw diameter: 45mm Calculated injection volume: 323 cm³ Length / diameter ratio: 20 L / D Material pressure: 1973 bar CLOSING UNIT Closing force: 1500 kN Mini / Max mold thickness: 250/560 mm Maximum distance between trays: 1060 mm Passage between columns: 500 x 500 mm Tray size: 790 x 790 mm GENERAL Oil quantity: 500 l. Dimension: (WxHxD) 5.2 x 2.1 x 1.5m. Weight: Kg 6700 EQUIPMENT CL4 command 1 core 1 blow gun
DEMAG Ergotech compact 1500/610 Order: NC4 Closing force: 150 T - 1500 KN Distance between columns: 500 x 500 mm Tray dimensions: 790 x 790 mm Min / max mold thickness: 250 - 560 mm Injectable volume: 323 cm3 Material pressure: 1973 bars Screw diameter: 45 mm L/D ratio: 20 Weight: 6700 kg Dimensions: 5.20 x 2.10 x 1.50 m
Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine ... more information
SANDRETTO Serie 8 sef 100 injection molding machine otto 200T E612 Sef 100 series Screw D50 / 392 cm3 / 1560 bar Between columns: 510 x 510 Opening: 550 Mold thickness: min 210 / max 630 Dim trays: 770 x 770 Installed power: 34.8 kW Dimensions: 6.36 x 2.14 x 1.84 Weight: 8800 kg Euromap 12 robot interface Auxiliary cores Top dosage
Description: Serial number 161491 Clamping force: 350 kN Mould opening force, max.: 31/100 kN Size of mould platens 400 mm x 400 mm Distance between tie bars 270 mm x 270 mm Mould opening stroke: 325 mm Mould height min.: 225 mm Max daylight: 550 mm Hydraulic ejector - stroke: 125 mm Ejector force forward/backward: 31 kN Screw diameter: 30 mm Ls/D ratio: 20 Injection pressure: 2400 bar Stroke volume: 67 ccm Shot weight, PS: 56 g Injection stroke: 95 mm Screw speed: 10 - 550 1/min Nozzle pressure: 60 kN Nominal capacity of pump motor: 11 kW Installed heating capacity: 3,4 kW Reservoir capacity: 190 ltr. Operating voltage 420 V, 50 Hz Dimension 3300 cX1200 x 1500 mm Weight 1500 kg Approx. Onsite Dimension. (l x w x h): 3,300 x 1,200 x 1,500 mm, weight approx.: 1,500 kg
Clamping force: 500kN, screw diameter: 30mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica. Including core pull and interface for Angus picker. Dimensions X/Y/Z: approx. 4000mm/1200mm/1500mm, weight: approx. 2000kg, operating hours: 38330h.
Description: serial number 160352 Clamping Force: 1000 kN Distance Betw. Tie-Bars: 270 mm x 270 mm Platen Size: 545 mm x 545 mm Mould Hight: min 250 mm Opening Stroke: 500 mm Max. Open Daylight: 750 mm Screw Diameter: 35 mm / 30 mm Injection Volume: 121 gram PS / 89 gram PS Injection Prresure: 1855 bar / 2350 bar Motor Power: 18,5 kW Heating Power: 5,4 kW Operating voltage 420 V, 50 Hz Heating 5,5 kW Pump motor 18,5 kW Total load 24,0 kW Dimension 4300 x 1500 x 1800 mm Weight 3850kg Approx. Onsite Dimension. (l x w x h): 4,300 x 1,500 x 1,800 mm, weight approx.: 3,850 kg
Clamping force: 350kN, screw diameter: 25mm, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, control: Multronica, operating hours: 97325h. Dimensions X/Y/Z: 3700mm/1200mm/1700mm, weight: approx. 1800kg. Including core pull, interface for sprue picker. Card is defective. On-site inspection is possible.
BMB Model MC 350 PL Year of manufacture 1994 Origin Italy Closing Unit Closing Force 3500 Kn (350T) Inner width between columns (hxv) 900x625 mm Mold opening way 700 mm Min. Mold height 200 mm Pusher distance 300 mm Pusher forward force 100 Kn Injection Unit Screw diameter 70mm L / D ratio 24 Volume 1450 Cm3 Weight (PS) 1300 g Pump power 55 kw Heater power 32.5 kw Weight ca. 16.5 t Width x Height 1850x2450 mm