boring mills and machining centers used for sale

Wagner SCR 160 well-kept radial drilling machine. Throat depth 1600mm. Speeds from 25 to 2000 RPM. Feed 0.04-3.2 RPM. Clamping table 630 mm x 500 mm x 500 mm. Cooling metering pump. ... more information

spindle diameter: 100 mmtravel -x axis: 2000 mmtravel -y axis: 1200 mmtravel -z axis: 1000 mmspindle stroke - max.: 500 mmtable surface area: 1250 x 1250 mmtable rotating: 360 °max. table load: 8000 kgspindle taper ISO: 50 spindle turning speed range: 30 - 1300 U/minfeeds: 2 - 1000 mm/minrapid traverse: 6 m/mindrive capacity - spindle motor: 14 kWcoolant: voltage: 380 Vcontrol: Bosch1-OSA One direction thrust bearing: total power requirement: 15,0 kWweight of the machine ca.: tdimensions of the machine ca.: 4,20 x 3,00 x 3,00 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 7372 Type: WHN 9B NC Producer: TOS Created: 1980 Parameters: Control system: HEIDENHAIN TNC 360 Work table length: 1000 mm Work table width: 1120 mm Maximum table load (uniform): 3000 kg Spindle drive power: 20 kW Maximum spindle speed: 1120 1/min X-axis travel: 1250 mm Y-axis travel: 1000 mm Z-axis travel: 900 mm Spindle diameter: 90 mm Machine weight: 12000 kg

spindle diameter:102 mmx-travel:1530 mmy-travel:900 mmz-axis:1520 mmspindle stroke:710 mmtable-size:1250 x 1400 mmtable load capacity - central/maximum:2500 kptable rotating:360 °main drive:11 kWspindle turning speed range:8 - 1600 U/minhigh speed spindle taper ISO:50 total power requirement:23 kWweight of the machine ca.:10 tdimensions of the machine ca.:5 x 3,5 x 2,8 mwith 3-axes digital readoutPoint to Point controll HEIDENHAIN 310Diverse Toolholders

Machine in good technical condition, possibility of testing after agreement. Weight: 12000 kg Control: TNC 360. X axis (longitudinal) 1250 mm Y-axis (pricna) 1000 mm Z axis (vertical) 900 mm Table length 1000 mm Table width 1120 mm Workpiece weight 3000 kg Spindle diameter 90 mm Max. shaft speed 1120 rpm Shaft motor power 20 kW

bore capacity in steel (diameter): 30 mmthroat: 290 mmbore stroke: 150 mmtaper MK: 3 MKtable-size: 320 x 370 mmthread boring diameter: mmfeeds: mm/Uturning speeds: 80 - 1400 U/mintotal power requirement: 2,0 KWweight of the machine ca.: 0,35 tdimensions: 0,6 x 0,8 x 1,95 mColumn drilling machine with:- variable spindle speed- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mmthroat: 295 mmbore stroke: 160 mmspindle turning speed - stepless: 110 - 2900 U/mincolumn diameter: 115 mmtable-size: 400 x 300 mmspindle taper MT: 3 bore capacity in cast iron: 40 mmtotal power requirement: 1,2 kWweight of the machine ca.: 330 kgdimensions of the machine ca.: 700 x 900 x 1850 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Column drilling machine with: - variable spindle speed - Machine light Drilling capacity in steel 30 mm Projection 290 mm Drilling stroke 150 mm Recording MK 3 MK Table size 320 x 370 mm Speed 80 - 1400 rpm Total power requirement 2.0 KW Machine weight approx. 0.35 t Dimensions L x W x H 0.6 x 0.8 x 1.95 mweight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,950 mm

- Table size: 400 x 300 mm - Quill stroke: 180 mm - Drilling capacity: 35 mm - Speed range: 110 - 1450 rpm - Spindle mount: MK3 - Total power: 0.8 kW - Machine weight: 350 kg - Space requirements (W x D x H): 1.2 x 0.9 x 2.0 m - Condition: very good Details runs smoothly, can be used immediately Accessories Vice, 3 chucks

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle ...

Manufacturer: Stankoimport Type: 2H135 Stock number: 0984 Year of construction: 1981 Spindle: CM4 Spindle diameter: 90 mm Spindle stroke: 250 mm Speed: 45 ... 1400 rpm Table size: 500 x 450 mm Table adjustment: 500 mm Dimensions (LxWxH): 1200 x 900 x 2500 mm Machine weight: 1500 kg

Table size: 1000x700 Travel spindle: 600 mm Precision guaranteed: 5 μm Spindle motor: 7.5 hp. Digital display on all axes: SONY LA10. ... more information

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: Kao MingType: Lux Drill-1250 DHYear of make: 1982Capacity: 50 mmThroat depth: 1.250 mmSpindle taper: MK5Without drill block (is available separately)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

HBM W 160 H, CNC Heidenhain iTNC 530, new 1982, after repairs 2009, spindle taper Morse 100, are reductions from M 100/HSK80  ... more information

Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Drilling spindle speeds infinitely variable 150 – 3000 rpm - Projection 300 mm distance drilling spindle – table / base plate 820 / 1220 mm - Table with 2 T-slots 500 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 700 x H 1950 x D 900 mm - Weight approx. 450 kg - with: - Machine vice - Quick-release drill chuck 1-13 mm - Lighting

spindle diameter: 105 mmx-travel: 1200 mmy-travel: 1000 mmz-travel: 325 mmadjustment of cross-rail: 785 mmdistance between columns: 1600 mmdistance spindle - column min./max.: 215 / 1100 mmspindle feeds - stepless: 1 - 6000 mm/minspindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/mintable surface area: 900 x 1500 mmworkpiece weight: 2000 kgspindle drive: 5 kWtotal power requirement: KVAweight of the machine ca.: 6 tdimensions of the machine ca.: 3,3 x 3,0 x 2,8 mdimensions of the machine ca.: 3,3 x 3,0 x 2,9 m• with RENISHAW -detector OMP 40,• mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with NC round table WALTER 1000 mm, see pictures  ... more information

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

Description: Horizontal Machining Centre Serial number 339 30-position tool changer 3 Axes (X, Y, Z) Control FANUC SYSTEM 6M Number of cycles according to counter 8584 h Chip conveyortoolchanger positions: 30, weight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 4,800 x 2,600 mm