boring mills and machining centers used for sale

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Maximum quill extension 1,600 mm Spindle revolutions in the range 0.8 – 630 min-1 Feeds in the range: drilling and milling 0.63 – 2,500 mm/min 0.63 – 4,000 mm/min Spindle electric motor power 77 kW Threads: metric Whitworth 0.5 – 12 mm 1 – 28 turns/1 SPINDLE VERTICAL TRAVEL ON STAND 3,150 mm STAND TRAVEL ON BED 6,000 mm DIMENSION BASE PLATES 12,800 x 5,665 mm DELIVERY TERMS The machine is currently in operation. Delivery date as agreed.

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest quill extension 1,600 mm Spindle speed in the range 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Threads: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL ON STAND 3 150 mm TRAVEL OF THE STAND ON THE BED 6,000 mm BASE PLATE DIMENSIONS 12,800 x 5,665 mm

bore capacity in steel (diameter): 23 mmthroat: 270 mmbore stroke: 110 mmtaper MK: 3 MKtable-size: 400 x 385 mmfeeds: mm/Uturning speeds: 135 - 825 U/mintotal power requirement: 0,9 KWweight of the machine ca.: 0,25 tdimensions: 1,2 x 0,8 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Table dimensions 265 x 265 mm , Speed range 210 to 2580 rpm , Drive power 0.75 kW , Drilling capacity 20 mmApprox. Onsite Dimension. (l x w x h): 600 x 400 x 950 mm, weight approx.: 70 kg ... more information

Horizontal boring mill W200H, TOS Axis: X- 8000mm Y- 3150mm Z- 2000mm W- 1600mm  ... more information

Description: Drilling capacity in steel 23 mm Projection 270 mm Drilling stroke 110 mm Recording MK 3 MK Table size 400 x 385 mm Speed 135 - 825 rpm Total power requirement 0.9 KW Machine weight approx. 0.25 t Dimensions L x W x H 1.2 x 0.8 x 2.0 mweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm

Drilling capacity steel/GG: 18/23 mm Spindle mount: 2 MK Projection: 250 mm Table size: 250 x 370 mm Spindle speeds: 400 - 5000 rpm Drive motor: 0.48/0.6 kW Space requirements: 750 x 500 x 1670 mm Weight: 130 kg  ... more information

Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable by hand lever 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed by head pressure Specifications: Drilling capacity in steel 32 mm Drilling capacity in cast iron 36 mm Spindle holder MK 3 Spindle speeds infinitely variable 140 - 1400 rpm Table size 500 x 360 mm Drilling depth 150 mm Column diameter 125 mm Projection 300 mm Drive power 1.5 kW Weight approx. 350 kg mechanical feed at the push of a button Feed speeds: 0.1 - 0.16 - 0.25 mm/revolution Thread cutting device coolant equipment, Drill table lighting Operating instructions Connection cable 16 A

x-travel: 1000 mmy-travel: 508 mmz-travel: 460 mmsize of pallet: 1240 x 550 mmnumbers of pallets: 2 workpiece weight: 800 kgspindle taper ISO: 40 spindle motor: 5,5 kWturning speed range: 28 - 4000 U/minno. of tools in magazin: 30 control: MAZATROL M 1 total power requirement: kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: 4,50 x 3,00 x 2,65 macc.: chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-spindle head, multi-spindle drill head, drilling gear- Joint multi-spindle head-max.: x drill-3x built-in drill collet: mm-min. Distance drill: mm-Weight: 11.3 kg-Articulated multi-spindle heads are variable tools: for various machining operations such as drilling, thread cutting, ountersinking, reaming, milling, turning, with which several holes can be machined at once.

Multi-spindle head, multi-spindle drill head, drilling gear-Joint multi-spindle head-Max. x drill-7x drill built-in collet: mm-min. Distance drill: mm-Weight: 11.3 kgArticulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Multi-spindle head, multi-spindle drill head, drilling gear-Multispindle drilling head with: drive-Drive gear motor SEW Eurodrive type: RF40DT80K4B-Power: 0.55 kW-Speed: 165 rpm-Max. x: drill-4x built-in drill collet: mm-Drilling pattern can: be customized-Dimensions: 1115/150/H300 mm-Weight: 55 kg ... more information

Multi-spindle head, multi-spindle drill head, drilling gear-Multispindle drilling head with: drive-Drive gear motor SEW Eurodrive type: RF40DT80K4B-Power: 0.55 kW-Speed: 165 rpm-Max. x: drill-4x built-in drill collet: mm-Drilling pattern can: be customized-Dimensions: 1115/150/H300 mm-Weight: 55 kg ... more information

Description: Machine number 42.506.01turning speed range: 120 bis 2580 rpm, table surface area l x w : 235x235 mm, total power requirement: 0,75 kW, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 600 x 400 x 1,750 mm ... more information

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine ...

Radial drilling machine, used Typ/ type: BR 50 x 1600 Hersteller/ make: WMW Jahr/ year of make: 1984 length of arm: 300...1600 mm Drilling capacity/ capacity at boring: 50 mm ( St 60 ) Drilling capacity/ boring: 60 mm ( GGL 20 ) Thread cutting: max. 36 mm ( St 36 ) max. 45 mm ( GGL 20 ) Bohretiefe/ drilling depth: 355 mm Tool holder / taper in spindle: MK 5 Distance from spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base: 2600 x 1000 mm Drehzahlbereich/ range of speeds: 31,5 .. 1400 rpm // rpm Feed: 0,063...0,63 mm/rev// mm per round Power: 7.5 kW Weight: approx. 3.2 t

cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mP O S A L U X (Switzerland)Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope a ...

Inv. Num. : 6989 Type: WH 10 NC Producer: TOS Created: 1984 Parameters: Work table length: 1120 mm Work table width: 1000 mm Maximum table load (uniform): 3000 kg Minimum spindle speed: 16 1/min Maximum spindle speed: 1250 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Cone: ISO 50

Description: Technical data : Total length 4490 mm, Total width 5700 mm, Total height 3885 mm, Total weight 20,500 kg. Machine in good technical condition, after agreement possibility of testing. ... more information