grinding machines used for sale

- Sanding Ø: 275 mm - Grinding length: 1000 mm - Circulation Ø: 275 mm - Tool weight max.: 125 kg - Center height: 140 mm - Tailstock: yes - Quill stroke: 32 mm - Tailstock mount: Morse 4 - Paper tape filter: yes - Machine weight: 5,200 kg - Space requirements (W x D x H): 4.3 x 2.3 x 1.6 m - Condition: good Details Well-maintained machine from the tool shop of a German car manufacturer Accessories Documentation, 2 tool cabinets with extensive accessories

- Internal grinding Ø min: 1 mm - Internal grinding Ø max.: 50 mm - Grinding length: 200 mm - Center height: 132 mm - Tool spindle speed: 150 - 1,500 rpm - Table speed: infinitely variable up to 10 m/min - Dressing device: yes - Grinding spindle speed: 16,500 - 120,000 rpm - Internal grinding spindle: 16,500, 22,000, 33,000 rpm - Paper tape filter: yes - Total power: 3 kW - Machine weight: 2000 kg - Space requirements (W x D x H): 1.8 x 1.1 x 1.8 m - Condition: good Details well-maintained machine from a German car manufacturer Accessories Documentation, 1 drawer cabinet with accessories --> see pictures, 1 pallet of sharpening stones --> see pictures

Discus machine with wide belt sanding unit, 400 V, 50 Hz, 98 A, 48 kW  ... more information

Fully automatic chip splitter - groove grinding machine for HSS - saw blades: Functionality: -Insertion / clamping of the saw blade -Enter number of teeth -Press Start in the touch screen - After the Groove grinding, remove the finished saw blade... ready. No further adjustment work necessary, as the tooth pitch, tooth depth, saw blade diameter is measured FULLY automatically by laser in the shortest possible time! All grinding parameters such as grinding speed, grinding wheel width, Groove depth, groove spacing, etc. are specified in advance via the control software / touch screen can be pre-set as required! - Saw blade range: 160 - 630 mm diameter - Tooth pitch from 2.5 mm or larger - Saw blade thickness: max. 8 mm - Grinding spindle: electronically controlled HF spindle (40000 rpm) incl. sealing air connection ! - Grinding wheel: CBN/diamond - 30 mm diameter, ...

Travel X/Y/Z 540/525/230 mm Coolant reservoir Balancing mandrel Grinding wheel holders  ... more information

Sharpening machine for milling max. diameter 18 mm min. diameter 0.5 mm Weight 120 kg  ... more information

Grinding length: 500 mm Grinding width: 350 mm Grinding height: 450 / 510 mm Grinding wheel: 300 x 50 x 76 mm Accesories  ... more information

Circular saw sharpening machine Vollmer Cne  ... more information

Speed 9000 - 250000 rpm Table clamping surface 590 X 320 mm 2-axis digital display Total power requirement 6 kW Machine weight approx. 2 t Space requirement approx. 2.1 X 1.6 X 2.5 m  ... more information

Surface grinding machine Jung HF 50 Year of construction ca 1970 Grinding length 500mm Grinding width 200mm Grinding height 400mm Grinding wheel diameter 225 x 25 x 21mm (Incl. 4 grinding wheels) Machine ran until the end Price net free loading  ... more information

Farrel Rollgrinder 2 Technical Details Machine Type: Farrel K850 60x240IN Year of manufacture: 1964 Year of modernization: 2008 Year of Arrival at Plant: 2009 Dimensions Distance between Centers: 240" - 6096 mm Max. Working Diameter with New Stone: 58" - 1473.20 mm Max. Allowable Workpiece Weight: 80 Tons Abrasive Wheels Dimensions: 36 "x 4 "x 20" - 914.4 x 101.6 x 508 mm Min. Working Diameter: 482.6 mm Max. working diameter: 927.10 mm (927.10 in.) Stone Speeds: 50 - 1200 rpm Surface Speed: 30.3 - 58,2 m/s Drive Head Spindle Speed: 0 - 100 rpm Longitudinal Slide Movement Feed rate: 1 - 5900 mm/min Cooling Devices Emulsion capacity in the tank: 1500 lt CNC Control HCC/KP10

Technical Details Machine Model: WS 450 Year of Manufacture: 1959 Year CSH began operation: 1986 Dimensions Space required: 12 x 5 m. Distance between centers: 5m (196 in.) Dia. Min. working dia. with new stone: 50 mm. (2 in.) Max. Max. working dia. with new stone: 900 mm. (35 in.) Max. allowable weight for the working plate: 14.000 kg. Stone Dimensions: 750 x 80 x 305 mm. Speeds: 350 ̴700 Rpm Drive Head Spindle Speed: 6 - 18 Rpm 16 - 48 Rpm Longitudinal Carriage Feeds Feeds: Range 1: 40 - 400 mm/min. Range 2: 265 - 2650 mm/min Rapid traverse: 2650 mm/min Cutting Feed Rate Control for Grinding Rapid traverse: 175/350 mm/min Fine cutting adjustment: 1 graduation Cooling Devices Liquid capacity in the tank: Approx. 3586 liters

Cincinnati Grinding Machine 2 Technical Details Type of machine: 60" x 240 Year of Installation: 1954 Dimensions Distance between centers: 240" (6096 mm.) Max. working diameter with new stone: 60"(1524 mm.) Max. allowable workpiece weight: 58967 Kg. (58.967 T) Stone Dimensiones: 36”x4”x20”(914x101.5x508mm.) Stone Speeds: 300 ̴ 700 Rpm Drive Head Spindle Speed: 0 ̴ 35 Rpm Longitudinal Slide Motion Feeds: 400 ̴ 2520 mm/min. Rapid movement: 2520 mm/min Cooling Devices Liquid capacity in the tank: 2568 liters                                                                                                                                                 

Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters

Technical details TYP/Model: Formmaster 6/30 Table surface: 600 x 300 mm Table adjustment lengthwise: 700 mm Cross: 300 mm Grinding area: 600 x 300 mm Grinding height max: 300 mm Magnet: 600 x 320 mm Grinding slices: 220 x 25 x 52 mm Automatic vertical delivery: Yes Connection: 8 kW Accessories: Auto. Vertical delivery; Full enclosure, magnet, Wet grinding; Depulsion for grinding discs Condition: Good Addition: The machine can be visited in our warehouse, not currently under electricity! Weight: 2.6 t Dimension machine about: 2,700 x 2,200 x 2,500 mm Subject to change and error in the technical details and details.

Machine Type: Contact Belt Sander No.2 Condition: ready for use Offer Type: Used Machine Specifications: Working size: Belt width 30 mm Belt length 1500 mm Drive type: el./mech. Drive: 0.5 kW 400 V Remark: Substructure Weight: 50 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Machine Type: Contact Belt Sander No.1 Condition: ready for use Offer Type: Used Machine Specifications: Working size: Belt width 30 mm Belt length 1500 mm Drive type: el./mech. Drive: 0.5 kW 400 V Remark: Substructure Weight: 50 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Stock number: 3832 SURFACE GRINDING MACHINE Manufacturer: DANOBAT , Type: RT 3200 Year of construction: 1996 Specifications: Grinding area 3200 x 800 mm Table size 3450 x 800 mm Table capacity 1-30 m/min Grinding length 3200 mm Large stone diameter 500 mm Large stone width 100 mm Large workpiece height 800 mm Power grinding motor 21/14 kW Hydraulic. Accessories: Automatic feed. Electric magnetic table 3200 x 800 mm Operating instructions Digital Display Axes Length: 7000 mm, Height: 3000 mm, Width: 2800 mm, Weight: 16,000 kg

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

Machine Type: Contact Belt Sander Manufacturer: METABO Condition: ready for use Offer Type: Used Machine Specifications: Working size: Belt width 30 mm Belt length 1500 mm Drive type: el./mech. Drive: 0.5 kW 400 V Remark: Substructure Weight: 50 kg The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.