saws used for sale

Specifications: Sawing area 90 ° round: 280 mm 90° flat: 280 x 160 mm 90° square: 240 x 240 mm 45° round: 180 mm 45° flat: 150 x 250 mm 45° square: 170 x 170 mm Stroke rates: 40 / 51 / 64 / 80 / 102 / 128 mm Cutting speed: 11 - 36 m/min Saw blade: 450 x 40 x 2.0 mm Material support height: 600 mm Engine power: 5 kW Dimensions (WxDxH), approx.: 750 x 1700 x 1100 mm Weight, approx.: 495 kg Equipment: - Cutting feed infinitely adjustable - Coolant device incl. pump - Roller trestle

Hydraulic pump, hydraulic power pack, hydraulic tank-Hydraulic tank: from automatic band saw Behringer HBP 360A-Filter: Mahle industrial filters-Fill level indicator: sight glass-Dimensions: 480/600/H520 mm-Weight: 99 kg ... more information

Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible. ... more information

Specifications: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - largest opening width of the vice 145 mm - Cutting range with saw blade diameter 300 mm - at 90° about 95 mm Flat 125 x 90 mm - at 45° about 95 mm flat 95 x 85 mm - miter adjustable left to 30° + right to 45° - Saw blade speeds 40 + 80 1/min - Drive 400 V / 1.6 / 2.1 kW - Coolant device - Discharge roller gear 3000 mm - Space requirement approx. W 600 x H 1700 x D 800 mm - Weight approx. 250 kg

cutting diameter: 380 mmsaw band length: 4570 x 42 mmcutting width: 380 mmband speed: 15 - 120 m/min: 380 mm: 380 mm: 380 x 400 mmtotal power requirement: 5,6 kWweight of the machine ca.: 2300 kgdimensions of the machine ca.: 2600 x 2600 x 2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-blade: 350 x Ø 40 x 3 mmcutting range: 120 mmcapacity 90 degrees: square: 100 x 100 mmcapacity 90 degrees: flat: 170 x 100 mmcapacity 45 degrees: round: 120 mmcapacity 45 degrees: square: 95 x 95 mmcapacity 45 degrees: flat: 120 x 100 mmcapacity 60 degrees: round: RE 100 mmcapacity 60 degrees: square: RE 85 x 85 mmcapacity 60 degrees: flat: RE 85 x 100 mmwork height max.: 900 mmsaw blade turning speeds: 17 / 34 U/mincompressed air: 6,0 - 8,0 bartotal power requirement: 1,4 / 1,9 kWweight: 340 kgrange L-W-H: 1010 x 765 x 2175 mmFurnishing :- semi-automatic vertical cold circular saw- Pneumatic quick clamping device- Infinitely adjustable saw blade feed- Convenient miter adjustment- Convenient stroke adjustment of the saw unit via clamping levers- Generously dimensioned gears- with Eisele rotation compensation for a long saw blade service life- Convenient saw blade chang ...

saw blade diameter: 350 mmcutting diameter: 110 mmcapacity 90 degrees: flat: 180 x 85 mmcapacity 45 degrees: round: 105 mmcapacity 45 degrees: flat: 130 x 85 mmcapacity 60 degrees: round: 105 mmcapacity 60 degrees: flat: 90 x 85 mmturning speeds: 9-18-36-74 U/minvice: max. 180 mmControl: IMET CNC total power requirement: 1,5 / 2,2 kWweight: 710 kgrange L-W-H: 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on requestCircular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw.Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron.Choosing the ri ...

saw blade diameter: 250 mmcutting diameter: 80 mmcapacity 90 degrees: square: 70 mmcapacity 45 degrees: square: 65 mmcapacity 90 degrees: flat: 130 x 40 mmcapacity 45 degrees: flat: 100 x 40 mmswivelling range: -45 / 90 / +30 Gradcutting speed: 2700 m/minweight of the machine ca.: ca. 60 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350x32x3,4 mm: 120 mmcapacity 90 degrees: round: 105 mmcapacity 90 degrees: flat: 180x70 mm: 120 mm: 100 mm: 135x60 mm: 110 mm: 95 mm: 135x60 mmtotal power requirement: 2,29 kWweight of the machine ca.: 530 kgdimensions of the machine ca.: 2720x1460x1740 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 380mm, max. angle adjustment: 180°, cutting speed: 96m/min, dimensions X/Y/Z: 3100mm/2200mm/1850mm, weight: 3100kg. Without infeed and outfeed roller conveyor. Including 10 originally packed saw bands. ... more information

Specifications: Sawing area 90° round: 300 mm 90° flat: 300 x 300 mm Feed rate: 10 mm Multi-feed: 6000 mm Max. sawing speed: 0 - 115 1/min Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm Equipment: -Conveyor - Coolant device - Emergency stop push button  ... more information

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

Capacity: 200 x 250 mm good condition video available ... more information

Description: Band saw fully functional, possibility of testing. The saw has a new gearbox to drive the saw band, sealed hydraulics. Accessories: roller track folded 3x2m, i.e. a track with a length of max. 6 m Cutting range 430 x 360 mm. Saw band 4400 x 34 x 1.1 mm. 3 kW motor. Belt speed 12-155 m/min. Weight 1650 kg. Dimensions 2170 x 2290 x 1820 mm.

Hydraulic Pedrazzoli band saw, complete with automatic advancement, new electronics, video touch, hydraulic descent speed variator and belt speed variator ... more information

Specifications: - Cutting range at 90° around 360 mm - Square 325 mm - flat 500 x 320 mm - Mitre adjustable left + right 90 to 30 ° - Cutting range at 45° around 360 mm - flat 350 x 320 mm - Material support height approx. 800 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Cutting speed 17 - 110 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Saw blade cleaning brush - Coolant device - Total drive power 400 V / 1.8 kW - Space requirement approx. W 2600 x H 2000 x D 2100 mm - Weight approx. 2000 kg

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.  ... more information

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Description: Dual-tube cutting machine with deburrer BEWO DB 70 No. 9814454 Specifications: Workable diameter: 12 - 76 mm Range of workable lengths: 35 - 2000 mm Range of brushable lengths: 140 - 2000 mm Rated power of cutting unit: 5.5 kW Range of cutting unit speed: 20 - 120 m/min Machine equipped with: Bar loader with beam magazine with 5 guides Air-channelized tube cleaning system User and maintenance manual CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 5200x2300mm - 2450 Kg Cutting unit: 5500 x 1300mm - 3000 Kgweight approx.: 6,700 kg, Approx. Onsite Dimension. (l x w x h): 16,300 x 2,300 x 1,800 mm

Description: Dual-tube cutting machine DCH70M with deburrer BEWO DB 70 No. 9811463 Specifications: - Workable diameter: 12 - 76 mm - Range of workable lengths: 35 - 4000 mm - Range of brushable lengths: 140 - 4000 mm , - Rated power of cutting unit: 5.5 kW - Range of cutting unit speed: 20 - 120 m/min Equipment: - Bar loader with beam magazine - Control panel containing Siemens 57 PLC - Packing table - Air-channelized tube cleaning system - User and maintenance manual - CE conformity Machine components: , Loader: 5600x2300mm - 1200 Kg Deburring machine: 6000x2300mm - 2650 Kg Cutting unit: 6800 x 1300mm - 3200 Kgweight approx.: 7,100 kg, Approx. Onsite Dimension. (l x w x h): 18,400 x 2,300 x 1,800 mm