Manufacturer:
(Category: 301)
This Haitian HTF 450x was manufactured in 2006. It features a robust clamping force of 4500 kN and a screw diameter of 80 mm, capable of an injectable volume of 1860 cm³. The machine offers a mold opening stroke of 740 mm and operates with a pump motor power of 45 kW, ensuring efficient production cycles. Ideal for precision injection moulding, the Haitian HTF 450x machine we have for sale is designed for high performance. Contact us for more information.
This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210 ... more information
Used Vertical C-Frame Injection Press, No. 6-1137 • Central injection from above Manufacturer: Engel Type: ES 200/45 VT HL Machine No.: 48214 Clamping unit: Panel size: 860 x 575 mm Panel heating: Without heating; Tool was heated by temperature control unit Clamping force: 441 kN Surface press pressure: 89 N/cm² Number of plungers: 2 Openings: 1 floor Opening width: 585 mm Press piston stroke: 400 mm Tool installation height: 185 mm min. / 400 mm max. Ejector: 1 lateral ejector, stroke 200 mm, ejector force 40 kN Sliding table: Lower plate can be extended forwards Injection Unit Rubber: Injection volume: 99 cm3 Specific spray pressure: 1,450 bar / 2,200 bar increased Average plasticizing capacity: 17 g/sec Screw speed: 20 - 480 rpm Injection screw: Ø 30 mm x 20.5 D Temperature control: Electric heating, 3 heating sleeves of 2.2 kW each, nozzle 0.2 ...
Description: Serial number 171 - 101 Model M 171 Designation EUROMAP 800H - 160 Maximum power 50 kW - 400 V - 50 Hz Rated current 75 A Interrupting capacity <,10 kA  ,Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 5,000 kg ... more information
Manufacturer : ENGEL Model: 180T VICTORY 650 POWER Year of manufacture: 2005 Working hours: 38,654 hours Screw diameter: 45 mm Calculated injection volume: 318 cm³ Pressure on the material: 2040 bar Closing force: 1800 kN Mini /Max Mold Thickness: 300-750 mm Passage between columns: 860 x 830 mm Central ejection 3 Cores robot interface PROCESS CC200
Manufacturer: Negri Bossi Model: V 700 Clamping force: 700 Tn Year of manufacture: 2008 Cores: 2 Robot interface: Yes Bi metal: Yes ... more information
This Arburg 270 C 400-70 Golden Edition was manufactured in 2022. As an injection moulding machine, it features a clamping force of 400 kN and includes a clamping plate set with a centering diameter of 125mm. It also comes with a plasticizing cylinder set 78mm and an open nozzle 18mm with internal thread M24x1.5. With only 90 operating hours, the Arburg 270 C 400-70 Golden Edition machine we have for sale is as good as new. Contact us for further details.
This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details.
Injection unit Screw diameter: 40 mm Closing unit Closing force: 1100 kN Passage between columns: 470 x 470 mm Other Equipment: 430 injection group NC4 control Commissioning: 2003 ... more information
Injection unit Screw diameter: 120 mm Calculated injection volume: 6898 cm3 Length/diameter ratio: 20 L/D Maximum injection flow: 1150 cm3/s Pressure on the material: 1700 bars Nb Temperature zone: 6 N Closing unit Closing force: 70,000 kN Opening stroke: 1200 mm Minimum mold thickness: 400 mm Passage between columns: 1140 x 1020 mm Dimensions of trays: 1670 x 1580 mm General Weight: 34000 Kg Other Equipment: Electric motor on dosing
Demag 800T hydraulic toggle press with electric metering. Screw diameter 110 Max. injection pressure: 1815 bar Injection volume: 4372 cm3 Max. mold thickness/min: 500/1050 Sold with Sepro visual robot ... more information
cm3: 1078 Bars: 2075 Cores: Robot interface: YES Bi metal: YES Others: 1 BLOW GUN ... more information
1.0 St. gebr. Injection Molding Machine with 6 - AXIS ROBOT Manufacturer: ARBURG Type: 5700C2000-675 GOLDEN EDITIO Year of Make: 2007 Clamping force: 200 tons Handlebar spacing 570 x 570 mm Screws DN: 45 mm Displacement: 318 ccm³ Moulded part weight 291 g/hp Control: SELGOCIA Equipment: -6 - ACHS robot Stäubli -1 x Core Pull -Bimetal cylinder -Temperature release up to 450° C -3 electric heating control circuits for tool heating
Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press
Description Electric charge Working hours: 6.300 ... more information