injection moulding machines used for sale

Wittmann Battenfeld EcoPower 300/750 / Electric machine / Production line with the Wittmann W821 robot and conveyor belt Year of Make: 2012 Injection unit: Screw diameter: 45 mm Injection weight: 326 g Spray pressure: 2116 bar Dosing volume: 358 ccm Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1250x1110 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6S - Touch Screen Additional equipment: Production line with the Wittmann W821 robot and conveyor belt Electric machine: high-speed, energy-saving and very quiet Perfect technical condition Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Automatic tool height adjustment It is possible to change the screw diameter for fi 35, 40, 50 mm Robot Wittmann W821 Year of ...

Battenfeld HM 300/2250S with the Wittmann W818 robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of Make: 2007 Injection unit: Screw diameter: 55 mm Injection weight: 702.5 g Spray pressure: 2500 bar Dosing volume: 772 ccm Clamping unit: Clamping force: 300 t Spar spacing: 710x630 mm Size of the clamping plates: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 - Touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 8 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection New original screw and barrel are installed in the machine Robot Wittmann W818 4-axis, high-speed robot: 3 ...

Battenfeld EcoPower SE 300/1330 / Electric Machine Year of Make: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 491.4 g Spray pressure: 2470 bar Dosing volume: 540 cc Clamping unit: Clamping force: 300 t Tiebar spacing: 770x720 mm Size of the clamping plates: 1090x1170 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B6 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Machine in very good technical condition Euromap 67 Robot interface Air Valve x 8 Control with hot runners x6 Hardened injection unit - Bimetal Parallel movements It is possible to change the screw diameter for fi 45, 55, 65 mm Metrics: Weight: 14100 kg Length/Width/Height: 7.20x2.04x2.20m Drive: Pumps/motor: 0 kW Heating capacity: 22 kW Total power: 0 kW All offered machines are started by our service t ...

Tederic D130 with the Sepro Industrial Robot 55 sprue picker / Hybrid machine / Operating hours: approx. 9,500 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 42 mm Injection weight: 246 g Spray pressure: 1900 bar Dosing volume: 270 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 620x620 mm Ejector: electric Clamping unit: toggle lever Control: KEBA - Touchscreen Additional equipment: Perfect technical condition, machine like new Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 9,500 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Central lubrication Parallel movements Sprue Picker Sepro Industrial Robot 55 Year of  ...

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of Make: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touch Screen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor controlled by an inverter – very precise Automatic part feeding with quality control system Machine workplace protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to partici ...

Engel e-motion 170/80 TL / Unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics / Electric machine Year of Make: 2020 Injection unit: Screw diameter: 30 mm Injection weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: New, unused production line with two robots Engel Viper 20 and Engel Viper 6 and an assembly line with optics Tie-bar-less, electric motor: high-speed, energy-saving and very quiet Total number of operating hours: 0 h Euromap 67 Robot interface Air valves Air core slides Control with hot runners x 20 Injection unit is wear-resistant and resistant to corrosion Central lubrication  ...

Engel e-victory 170/80 Ecodrive / Production line with the Engel Viper 20 robot / Hybrid machine Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 145 g Spray pressure: 2000 bar Dosing volume: 157 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 15,000 in automatic mode Total number of operating hours: 22,581 h Euromap 67 Robot interface Air valves Hydraulic core pull x 2 Control with hot runners Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Parallel movements Water ...

Engel e-motion 310/100 / Electric machine / Production line with the Engel ERC 13/1-F robot Year of Make: 2007 Injection unit: Screw diameter: 30 mm Injection weight: approx. 102 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Size of the clamping plates: 810x690 mm Ejector: electric Clamping unit: toggle lever Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, electric motor: high-speed, energy-saving and very quiet Euromap Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Central lubrication The machine has been regularly serviced by the authorized service Engel Engel ERC 13/1- ...

Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Metrics: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW All offered machines are started by o ...

Engel Victory 330/110 Tech / Production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of Make: 2004 Injection unit: Screw diameter: 40 mm Injection weight: 190 g Spray pressure: 1670 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 0x0 mm Size of the clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 27.7 kW  ...

Engel Victory 330/120 Tech / Production line with the Engel Viper 12 robot Year of Make: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Spar spacing: 0x0 mm Size of the clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners x 9 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel D ...

Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of Make: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Spray pressure: 2400 bar Dosing volume: 113 ccm Clamping unit : Clamping force: 140 t Spar spacing: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air Valve x 8 Hydraulic core pull x 5 Control with hot runners x 16 Reinforced Injection Units – Bimetal ...

Engel Victory 200H/60W/180 combi / Production line with the Engel Viper 20 robot Year of Make: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Spray pressure: 2392 bar Dosing volume: 61 ccm Clamping unit: Clamping force: 180 t Spar spacing: 0x0 mm Size of the clamping plates: 1020x980 mm Ejector: hydraulic Clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced Injection Units - Bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter  ...

Demag Ergotech Compact 250-80 Year of Make: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g Spray pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: Clamping force: 25 t Tiebar spacing: 280x280 mm Size of the clamping plates: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 2600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.  ...

Sumitomo Demag IntElekt 50/370-80 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Metrics: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machi ...

Demag Ergotech Compact 500-120 / Machine in very good technical condition Year of Make: 1993 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2000 bar Dosing volume: 61.3 ccm Clamping unit : Clamping force: 50 t Handlebar spacing: 355x355 mm Size of the clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air Valve x 1 Hydraulic core pull x 2 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 5.1 kW Total power: 20.1 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in liv ...

Demag Ergotech Compact 500-200 / Machine in very good technical condition Year of Make: 1997 Injection unit: Screw diameter: 30 mm Injection weight: 94 g Spray pressure: 1990 bar Dosing volume: 106 ccm Clamping unit : Clamping force: 50 t Handlebar spacing: 355x355 mm Size of the clamping plates: 520x520 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Hydraulic core pull x 1 Hardened injection unit - Bimetal Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Metrics: Weight: 3100 kg Length/Width/Height: 3.60x1.40x1.80 m Drive: Pumps/motor: 15 kW Heating capacity: 7.5 kW Total power: 22.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical test ...

Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Demag Ergotech Compact 800/420-200 Year of Make: 2000 Injection unit: Screw diameter: 30 mm Injection weight: 94 g Spray pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Handlebar spacing: 400x400 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to re ...

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of Make: 2007 Injection unit: Screw diameter: 40 mm Injection weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with the turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic core pull x 2 Hardened injection unit - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel movements Original turntable Robot Wittmann-Demag W721 Year of Make: 2007 4-axis robot: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1200, Z-1 ...