Manufacturer:
(Category: 301)
Engel injection moulding machine old ... more information
Ejection stroke: 35mm, weight: 700kg. ... more information
INJECTION MOULDING MACHINE DEMAG DC320 with the following characteristics: Press: 350 ton Platens : 700x700mm Capacity: 2.5kg/shot The machine is in top excellent condition with only a few months of operation time. - Condition: top excellent - Can be shown under power - Reason for sale: commercial Screw diameter: 45mm Tie bar spacing (H) & (V): 720 x 650 mm Shot volume in cm3: 360 cc Pressure on material: 2400 bar
BATTENFELD 400/150 S-KS /… / 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport ... more information
various spare parts incl. ... more information
with spare screw, high-pressure hose and various spare parts - see pictures ... more information
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... more information
Max. clamping force: 350kN, screw diameter: 30mm, max. dosing volume: 70cm³, with documentation. ... more information
clamping force: 700 kNinjection volume: 103 cm³screw diameter: 30 mmplaten size: 432 x 310 mmclosing stroke: 650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Used injection moulding machine made by Arburg model Allrounder 221-75-350, new 1984. Closing force: 350 kN/tonne. Injection force: 77 kN/tonne. Operating voltage: 380V, 50Hz. Heating: 3.4 kW. Pump motor: 7.5 kW. Total load: 10.9 kW. ... more information
Injection molding machine BM-BIRAGHI model HORIZON 4370/650, Italy, 1985 Clamping force - 650 tons. Injection volume - 2000 cm3. The maximum injection pressure is 150 bar. Distance between columns 800x800mm. New screw pair f.90 mm. ... more information
Connected load: 17.71kW. ... more information
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works) ... more information
Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request
Clamping force kN 600 Mould thickness mm 200-400 Minimum mould diameter mm 160 Opening stroke mm 100-250 Distance between tie-bars V/H mm/mm 280/305 Stroke, injection unit mm 300 Nozzle contact force KN 41.2 Screw diameter mm 32 Injection pressure bar 1569 Max. injection volume cm3 73.9 ø centring ring mm 120 ø mould release bar (=standard) mm M12-M16 Max. cylinder temperature °C 400 SW release bar mm 32 - 36 - 41 ø clamping screw M12 Robot Yes
Clamping force: 2700kN, stroke volume: 20,300cm³, injection pressure: 1360bar, total power: 418kW, the machine was completely overhauled in 2008, it got new pumps and all bushings and guides were renewed, in 2016 the machine got a new Siemens control, in 2021 all pumps and valves were recalibrated and in 2021 all slide rails were renewed.
The press is currently decommissioned, and is equipped with an inverter for which it has energy consumption reduced to 50% It is equipped with a pneumatic solenoid valve. The cylinder is Bimetal replaced new for 3 years (polystyrene has always worked) ... more information
Engel hose pouring machine type: IT 2000-350 controls: CC 90 construction year: In 1987 Schliesseinheit Schliesskraft t: 350 opening ways mm: 700 cross-beam measure mm: 735x735 installation height min / max. mm: 250/660 record size: 1080 x 1080 hose unity snail diameter mm: 70 hose weights gr: 1009 hose volumes cm?: 1154 hose pressure cash: 1400 mass and weights dimensions LxBxH m: 9.00 x 2.10 x 2.40 machine weights kg: 20500 other Euromap 12 angels Robot
Year of construction: 1987 Injection weight in PS: 24 g Control type: Dialogica Injection unit: .../45 Screw diameter: 22 mm Injection weight in PS: 24 g Clamping unit: 150/... Lights spar spacing: 170 x 170 mm Aperture travel: 200 mm Max. plate spacing: 350 mm Ejector travel: 75 mm ... more information
Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine