boring mills and machining centers used for sale

Fibrotakt table ... more information

Drilling and threaded spindles, with FIBRO round board approx. 800 mm,See pictures  ... more information

spindle diameter: 90 mmx-travel: 1000 mmy-travel: 1200 mmz-travel: 1200 mmfeed movement: 710 mmspindle taper ISO: 40 turning speed range: 8 - 1600 U/mintable-size: 1120 x 1000 mmtable rotating: 360 °table load: 2,5 ttotal power requirement: 11 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 4,5 x 3,3 x 3 mseparate switchboard, rapid feed, some tool holders, without face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main axis diameter 90 mm Walrus Cone nº 5 (ISO 40) Longitudinal Column Travel 800 mm Vertical Movement 1.000 mm Automatic cross travel 1,000 mm Automatic longitudinal movement with lunette 1,000 mm 1.350 mm longitudinal automatic movement without lunette Bench width 900 mm Number of rotation speeds 18 Rotation speeds 10-1.000 rpm Table surface ` 1.000 x 1.200 mm Maximum weight allowed on the table is 4,000 kg Table rotation with 90º block function 360º Approximate weight 10 Tons Main engine power 15 HP Feather diameter 520 mm Plate travel 170 mm Speed Ranges 14 Maximum and minimum rotation speeds 10-335 rpm

spindle diameter: 130 mmx-travel: 1780 mmy-travel: 1660 mmControl: Heidenhain 355 total power requirement: kWweight of the machine ca.: 30 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

spindle diameter: 135 mmx-travel: 1400 mmy-travel: 1000 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

workpiece diameter: 125 mmgrinding depth: 50 mmclamping length: 2000 mmtotal power requirement: 0,5 kWweight of the machine ca.: 1000 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding MachineModel ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278_______________________________________________________Distance between centres 50 – 2.000 mmHeight of centres approx. 125 mmWorkpiece Ø in clamping Vice 8 – 125 mmSwing of workpiece over tailstockguide 290 mmSwing of Workpiece max. over grinding head pillar 300 mmMax.weight of workpiece 250 kgMax. centre hole taper Ø 2 – 50  ...

workpiece diameter: 8-125 mmgrinding depth: 130 mmclamping length: 50-1100 mmmax. workpiece diameter: 0 mmmin. workpiece diameter: 0 mmworkpiece length: mmtotal power requirement: 1 kWweight of the machine ca.: 500 kgdimensions of the machine ca.: mT E C H N I C A (Switzerland)Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400_______________________________________________________Distance between centres 50 – 1,100 mmHeight of centres 145 mmWorkpiece Ø 8 – 125 mmMax. centre hole taper Ø 2 – 50 mmMax. centre hole taper angle 60 °Clamping range of vice 4 – 150 mmS ...

bore capacity in steel (diameter): 60 mmthroat: 420 mmbore stroke: mmtotal power requirement: 4 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: mDrilling Ø, steel or cast iron 60 mmBoring Ø with pre-bore ½ 100 mmTable Ø 600 mmDistance between spindle and column 420 mmSpindle taper MK512 spindle speeds 120 - 800 rpmQuill stroke 270 mmMounting height above rotary table 800 mmMounting height above base plate 1,400 mm8 drilling feeds 0.13 - 1.8 rpmSpindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 HzWeight approx. 2,600 kgAccessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces).The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 1975 : 9430 : prompt, Zwischenverkauf v : Portugal : 12400 €: 1 : 3500 mm: 8 mm: 450 mm: 40 1/min: 0,5°/1°/1,7° °: 1000 mm: 14.7 kW: 4300 mm: 2100 mm: 1650 mm: 10500 kglink-guided machine with cutting angle adjustmentcutting length limitationtrapezoidal spindle for backgauge1x side stop2x table support armsballs in the table18x hold-down devicesoperating instructions in GERMANdoes not complie with the German UVV &, Austrian AMVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 32mm, threat cutting: M5-M20, with 1x IXION BST 23G, 2x REMA HB 15 and 1x IXION BST 15. ... more information

: 0 : 0 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mPC board drilling m/c, single spindle, projektor.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Machine Type: Radial Drilling Machine Manufacturer: ARBOGA Model: ER 830 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Drilling diameter: 35 mm Drilling depth: 175 mm Speed range: 80 – 890 rpm. Spindle mount: MK4 Projection: 1060 mm Propulsion: 1.1 / 1.4 kW Remark: automatic feed tapping device, dice table, coolant device, heavy drill vice, 4 machine feet, quick-release chucks, Storage table Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Drilling capacity in steel St 60 40 mm Drilling capacity in cast 50 mm Threads in steel 32 mm Threads cast 42 mm Taper of spindle mount Mt 5 Projection 1.630 mm Quill stroke 310 mm Spindle speed range 40-1,800 RPM Feed areas 0.125 1.25 mm / Rev About 3,7 kW Machine weight 3.8 t Quick change system

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Co ...

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO  ... more information

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW  ... more information