subcategories
(3rd category level)
Manufacturer:
(Category: 110)
Two unused tables from paller horizontal borer Skoda W180NC 2240x2240cm of clamping surface and the weight of one table is 6500kg ... more information
Article number: 27-04-002 Manufacturer: Flange table Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x500mm Weight: approx. 120kg Table clamping surface: approx. 600x400mm Swivel range: via hand crank Left: approx. 90 degrees Right: approx. 90 degrees Clamping T grooves: 3 pieces Groove width: approx. 18mm T grooves: approx. 125mm Accessories: -Hand crank for table adjustment Other accessories on request Price and other technical data on request
Article number: 27-04-004 Manufacturer: Walter Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1990 L x W x H: approx. 600x600x400mm Weight: approx. 300kg Digital display: 1-axis digital display Heidenhain Encoder: Heidenhain Resolution: 0.001 degree Face plate diameter: approx. 400mm Clamping T-slots: 4 pieces of 14mm each Rod passage: approx. Ø 40mm Indexing: manual via handwheel Quick indexing: Electrically via shaft stump & e.g. cordless screwdriver Max.table load: Vertical: approx. 200kg Horizontal: approx. 500kg Accessories: Complete Instruction Manual Mechanical table clamping 1x ISO 40 tool holder Display Bracket Handwheel for indexing with extra-long shaft stump 2 pieces of eyebolts for lifting the table Other accessories on request Price and other technical data on request
length in total: 11000 mmband width: 200 mmTotal height: 630 mmlength in width: 400 mm: ca.10 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
table diameter: 355 mm: Ø 850 mmtable load: 0,6 tweight of the machine ca.: 0,4 tdimensions of the machine ca.: 0,6x0,6x0,6 m- automatic reversing device mit tailstock and own control.- extension of 150 mm center for center height 430 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1700 mm space requirements -front/back-: 1600 mm total weight approx.: 700 kg ... more information
measuring range X-axis: 300 mmmeasuring range Y-axis: 300 mmTable dimensions: 800 x 800 mmtaper ISO: 30 voltage: 220 V / 50 Hztotal connected load: 0,3 kWweight: 0,5 tdimensions of the machine ca.: 1,5 x 1 x 1,6 mUse: no definition: : • Tool presetter with taper SK 30, SK 40 is also optionally possible,• Display of measured value ZOLLER DA 6050 / 0266,serial no: H320/066The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transport length: 2000 mmband width: 250 mmdayligth: 250 mmwidth: 410 mm0: 900 mmtotal power requirement: kWweight of the machine ca.: 0,75 tdimensions of the machine ca.: 3x0,5x1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg
Machine type: Extraction with filter system Manufacturer: HANDTE Model: Matador-AMT 14.1 AV-3 Year of Make: 1993 Condition: ready for use Offer type: used machine Specifications: Working Size: Air volume 2400 m³/h Total pressure 150 daPa Drive: 2.2 kW Remark: 16 filter inserts with motorized cleaning The machine is in a ready-to-use condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.
Electric - Hydr.- Machine Vice Offer number: 50105 Make: R�HM Type: 744 - 05 Machine No: xxxx Built: approx. 1993 Technical data: - Electric - Hydr. Machine vice - with separate hydraulic unit - and E. foot buttons for opening and - close the clamping jaws. - Jaw width 200 mm - Jaw height 75 mm - Clamping range approx. 0 - 350 mm - Guide track height approx. 100 mm - Total height 185 mm - separate hydraulic unit röHM , type HA 707 - 80 - Start 400 V / 0.37 kW - Weight approx. 100 Kg - Space requirement approx. L to 850 x W 280 x H 185 mm
material width: 400 mmmaterial thickness: 0,4 - 5,5 mmfeed length: mmroll diameter: 160 mmspeed: 120 m/minweight max. in kg: 50/180 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
volume capacity: 5,63 m³/minsuction: 1 barpressure: 8 barturning speeds: 3000 U/minengine output: 37 kWdimensions of machine L x W x H: 1,35 x 1,05 x 1,43 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Central plant with 2 pieces of automatic centrifuges, operation until February 2019 with oil. The Cleaning system for oil incl. tank 20 m3, is equipped with two automatic centrifuges of 150 m3 each. 200 liters/min. The total capacity of the plant is 300 to 400 liters per minute. Oil or emulsion, with emulsion more than 400 liters possible. Two centrifuges T42 , Clean tank 20 m3 oil (divided into two separate tanks with overflow) incl. pump for Supply of production with pure oil. In addition, the system has a lot of accessories: all spare parts + an old one centrifuge from 1987 as spare parts dispenser, a lifting tipping device for the Sludge emptying of the 200 kg buckets. The sludge ejection runs with this centrifuge automatically into the bucket under the centrifuge. The scope of delivery also includes a additional electrical cabinet for a second system with the sam ...
Inv. Num. : 7885 Type: Victory 1100 Producer: MOBERT Created: 1994 Parameters: Max. material width: 1100 mm Cutting thickness: 0.010 - 0.07 my Maximum product length: 1200 mm ... more information
material width: 300 mmmaterial thickness: 4 mmfeed length: 0,1-6500 mmmaterial cross-cut: 1200 mm²The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
diameter: / mmworkpiece length: / mmlength: / mmMITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plateSize: 600 x 600 x 80mmTarget µm: 16Actual µm: 10,00Own weight: 85kgInformation on the scope of deliveryThe package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 100 mmmaterial thickness: mmfeed length: 285 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
material width: 150 mmmaterial thickness: 2,5 mmfeed length: 485 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
Machinery already withdrawn and stored in the warehouse.4500x800x1500 mm1000 kguncheckedloaded on truck ... more information