grinding machines used for sale

max. wheel diameter: 1010 mmgear width: 0 mmmax. module: min. module: total power requirement: 15 kWweight of the machine ca.: 9,5 tdimensions of the machine ca.: mMax. depth of tooth 10 mmMax. workpiece Ø (for clearance) 1,010 mmMax. external Ø of coupling 610 mmSliding base withdraw 216 mmMax. distance from grinding wheel to workpiece nose 90 - 430 mmMax. weight of workpiece, including clamp 500 kgNo. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mmGrinding wheel speeds, infinitely variable 0 - 3,600 rpmWork spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 HzWeight, approx. 9,500 kgAccessories / Special Features Automatic roughing and finishing process via pre-settable counter andbuilt-in feed cam. Counter for number of teeth. Counter for number of dressing cycles. 2 built-on dressing units with three dressing diamonds for radius dressing,  ...

workpiece length: 2700 mmswing dia.: 630 mmclamping length: 2700 mmstroke position adjustment: 40-130 mmgrinding wheel diameter: 1000 mmtotal power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: 9x4 mcyclic control CNC / Simatic S7-300steady resthydraulic pre-positioningmanual fine tuning (Vertical u. Horizontal)grinding wheel flangesrough turning fixtureRadial- and side turning fixtures manual Radius turning fixturefiltering system Polo inclined bed filter SB-A0.4manufactured in 2012grinding wheels storage system for 8 grinding wheelsdiverse machine toolssteady rest jawsdiverse irrigation nozzle (workpiece cooling)washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulationdiverse spare partssliding cover left and rightdiving plate and clampinsertsThe data for this ad was created with M ...

Description: serial number: 6.081981 power: 7,5 / 8,5 kW Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,600 mm, weight approx.: 750 kg ... more information

Specifications: Grinding length: 750 mm Grinding width: 250 mm Grinding headstock/ Drive power: 5 kW Table clamping surface: 720 x 200 mm Grinding height to center spindle: 500 mm Grinding wheel: 225/250 x 25 x 51 mm Max. table load: 100 kg Power supply: 3 phases, 400 V  ... more information

Article code: 14-10-061 Manufacturer: Kugel Müller Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1000x1000x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 310mm Grinding width: approx. 175mm Grinding height: approx. 200mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Grinding wheel dimension: approx. Ø175x100x76mm Grinding spindle speed: approx. 2850rpm Drive power: approx. 2.2kW Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Hydraulic up and down movement of the grinding spindle via pump lever  Grinding wheels – protection  Documentation  Pull-off device Other accessories on request Price and other technical data on request

honing diameter:1,5 - 165 mmstroke:400 mmtotal power requirement:1,8 kWweight of the machine ca.:0,6 tdimensions of the machine ca.:1,3 x 1,9 x 1,7 mspindle speeds::200 - 2500 U/minstroke speed:80 - 310 Hübe/minspindle motor:0,8 KWhoning oil capacity:95 LtrMachine with measuring control- various tooling

For sale lot of machines, main for thread grinding, and gear grinding, also horizontal pfauter, best price for bundle. Reishauer NRK Reishauer US x2 Klingelnberg HNC 35K Wmw hinterdrehmachine x2 Reinecker hinterdrehmachine Kapp grinding Wmw niles 35/20-29 Horizontal Pfauter Lindner grinding x2 Klingelnberg gear test machines

workpiece diameter: 600 mmworkpiece weight: 400 kgworkpiece height: 300 mmtotal power requirement: 35 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Cylindrical grinding machine COMETA Susy built 1980 Grinding diameter 300 mm Grinding length 800 mm Internal grinding device digital measuring system Mitutoyo Speed and feed variable New magnetic chuck ... more information

MAX DIAMETER 200 MAX LENGHT 2500  ... more information

grinding length:600 mmgrinding width:300 mmtotal power requirement:7,5 kWnumber of spindle speeds:0-3000 grinding wheel motor:7,5 kWABA magnetic table flat grinding machine ... more information

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

 ... more information

max. wheel diameter: 2500 mmgear width: 1200 mmmax. module: 32 min. module: 3 total power requirement: 25 kWweight of the machine ca.: 60 tdimensions of the machine ca.: mGear , min. / max. 180 / 2,500 mmModule 3 - 32Helix angle, max. 10 - 35 °Gear width for straight gears 1,200 mmStroke length, approx. 100 - 1,200 mmNo. of strokes 80 - 350 /minStroke position adjustable 300 mmStroke speed 4 - 40 mmMax. weight of workpiece, approx. 18,000 kgMin. / max. no. of teeth 16 / 576Table size x bore 1,400 x 500 mmGrinding wheel Ø, approx. 500 mmGrinding wheel peripheral speed 34 m/sTotal electrical load, approx. 45 kW - 380 V - 50 HzWeight of machine, approx. 60,000 kgAccessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with settings for rou ...

Description: Fabrication number: 269 Center height above table: 105 mm Center width: 550 mm Largest sanding diameter: 200 mm Largest sanding length: 400 mm Largest clamping diameter: 200 mm Largest clamping length: 550 mm Table: Clamping surface: 800 x 112 mm Largest longitudinal movement: 400 mm Can be swiveled to 2 sides: 180° Adjustability of the grinding spindle slide: Transverse: 250 mm Vertical: 300 mm Can be swiveled: 360° Sanding spindle: Pivoting of the spindle head to 2 sides: +/- 30° Smallest/largest distance from the center of the grinding spindle to the top edge of the table: 75/375 mm Grinding wheel: Largest grinding wheel diameter: 150 mm Largest width: 20 mm Bore: 64 mm Flange diameter: 80 mm Cone diameter: 25 mm With machine accessories as shown in the pictures Machine dimensions: 1220 x 1100 x 1400 mmweight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,60 ...

x-travel: 650 mmy-travel: 450 mmworkpiece height: 585 mmControl: ADCOS CNC 400 total power requirement: 15 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mH A U S E R (Switzerland)CNC Controlled Hi Precision Double Column Jig GrinderModel S 40 – CNC 311 / ADCOS 400 CNCYear 1981 / CNC modernized in 2008 # 0126__________________________________________________________________ ___Table size approx. 630 x 770 mmTable load capacity approx. 500 kgTable travel longitudinal max. (X) 650 mmGrinding head slide cross max. (Y) 450 mmVertical adjustment of cross rail max. (W) 500 mmGrinding spindle stroke max. (Z) 140 mmStroke number of grinding head (4cycles)  ...

grinding diameter: 605 mmgrinding length: 5000 mmcentre height: 315 mmpeak cone: 60 °grinding spindle slide adjustment: 300 mmtable - swivable: 7 Gradtable adjustment - longitudinal: 5140 mmgrinding wheel size: 750 x 80 x 305 mmtaper diameter: 305 mmflange diameter: 400 mmmax. workpiece weight between centres: 3000 kggrinding wheel drive: 40 kWmax. workpiece diameter: 630 mmgrinding wheel peripheral speeds:: 35 m/sgrinding wheel turining speeds: 500 - 1100 U/minworkpiece turning speeds: 8 - 120 U/mintable speeds: 30 - 4500 mm/mintotal power requirement: 58,5 kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: - mThe machine was geometrically overhauled in 2020- 8 steady rests (30 - 200 mm)- Suction system- Coolant system with magnet/paper filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 1500 mmstroke: 0 mmswing dia.: 500 mmtotal power requirement: 30 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

- Working wheel diameter: 600 mm - Grinding wheel width: 500 mm Conversion of the grinding machine with automatic plunge - automatic diamond coating with adjustment of ribs Machine repair with modification ... more information

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition