grinding machines used for sale

SCHMALTZ RGK 1100/6000 Crankshaft Grinding Machine Technical Details : Max.Workpiece Length :8000 mm Grinding Diameter: 1100 mm Grinding Wheel Diameter:1300 mm Grinding Motor : 25 PS Crankshaft Radius Max: 300 mm Cr8zr7tiq2 Workpiece Weight:2500 Kg Clamping Diameter: 100-250 mm Rotation Speed : 400 to 500 U/Min Workpiece Speed:10-14-20 U/min Slide Speed: 50 to 600 mm/min

power supply 3x400 V, 50Hz Power: 7 kW Weight: 2,800 kg Installation dimensions: 2,400 x 2,000 x 1,700 mm Max grinding diameter: 75 mm Min grinding diameter: 5 mm ... more information

power supply 3x400 V, 50 Hz spindle speed range 6000-15000 rpm. Workpiece spindle speed range 112-1000 rpm. Workpiece spindle torsion 90 ° ... more information

Voltage: 220-380V, without documentatio ... more information

Ref. -No.: 10159Manufacturer: KELLENBERGERYear of construction: 1974Storage location: HalberstadtCountry of origin: SchweizGrinding Length: 1000 mmGrinding Diameter: 250 mm ... more information

TECHNICAL INFORMATION:, Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm, Dimensions of the regulating grinding wheel (od x id x width): Ø304,8xØ152.4x204 mm, Main motor power: 20 Kw, Voltage: 380 V, Height: 1700 mm, Length: 2000 mm, Width: 1080 mm, Weight: 4315Kg approx. machine and 60 Kg box

: 1640 weight: 280 kg: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

x-travel: 420 mmy-travel: 270 mmworkpiece height: - mmtable-size: 254 x 482 mmthroat: 254 / 318 mmgrinding spindle speeds: 12. - 60.000 U/min.spindle stroke: 92 mmspindle turning speed range: 90, 136, 184, 280 U/minnumber of strokes adjustable: 2 - 120 Hübe bei 51 mm0: 1,25 µm bei 30 mmRequired air-pressure: 7 barweight of the machine ca.: 1430 kgdimensions of the machine ca.: 1,45 x 1,2 x 2,4 mElectric 380 Volt: Tool cupboard: 2 Rotary table: Moore 254 mmGrinding head with air turbine: 4 x The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available.Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the ...

grinding diameter: 1400 mmgrinding length: 3500 mmcentre height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 1310013Type of machine Super finishing machineMake NAXOS UNIONType WT 140/3500Build in 1975Max. grinding diameter 1400 mmMax. grinding length 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Table size 2300 x 800 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 3700 x H 1400 x D 1600 mm - Weight approx. 600 kg  ... more information

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1745 rpm -grinding wheels: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg ... more information

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400  ... more information

Drill grinder, drill grinder, tool grinder, twist drill grinder-Manufacturer: Haarmann, drill grinding machine type HSP 80 with cutting device-Drill holder: up to Ø 80 mm-Grinding discs: Ø 300 x 65 mm-Coolant device: not available-Accessories: including operating instructions and tools, see photo-Dimensions: 1400/1300/H1600 mm-Total weight: 872 kg

- Grinding length: 600 mm - Grinding width: 400 mm - Workpiece height: 400 mm - Magnetic table: 600 x 350 mm - Dressing device: yes - Grinding wheel Ø: 300 mm - Grinding spindle speed: 1400 rpm - Total power: 6 kW - Machine weight: 3500 kg - Space requirements (W x D x H): 2.0 x 1.5 x 2.2 m Details Automatic delivery in Z, fully functional Accessories Documentation, Machine Feet

Article code: 14-10-067 Manufacturer: Athena Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1000x1000x1800mm Weight: approx. 700kg Control: conventional Grinding area: Grinding area: approx. 300x180mm Grinding height: approx. 220mm Magnetic clamping surface: approx. 250x150mm Grinding spindle: Grinding spindle dimensions: approx. Ø175x76x76mm Grinding spindle speed: approx. 2820 rpm Drive power: approx. 2.5kW Z-Delivery: Manual Grinding movement: manual Accessories  Segment grinding wheel with flange  Splash guard – enclosure  Grinding wheels – protection  Coolant device  Tension wrench  Permanent magnet  Instruction manual Other accessories on request Price and other technical data on request

Surface grinding machine Manufacturer: Jung Type: HF 50 Year of construction: 1975 Sanding area: 500 x 200 mm  ... more information

Very good condition, with change gears and accessories, new belts, new diamond dressers, preparation for oil filtration new.  ... more information

Article code: 14-10-066 Manufacturer: Cup Grinding Machine Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 600x600x1700mm Weight: approx. 320kg Control: conventional Grinding area: Grinding length: approx. 300mm Grinding width: approx. 300mm Magnetic clamping surface: approx. 200x150mm Grinding spindle: Z-Delivery: Manual Grinding movement: manual Accessories  Permanent magnet  Cup grinding wheel  Grinding wheels – protection Other accessories on request Price and other technical data on request

Machine Type: Vibratory Mass Finishing Machine Manufacturer: WALTHER TROWAL Model: CV 125 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Grinding area: container Ø, inside: 930 mm Drive type: el./mech. Propulsion: 1.9 kW Remark: 2-stage motor, Rubber coating is in good condition Weight: 500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Price EXW loaded for free on suitable transport. Very friendly EU transportation cost. Please Details: Jones and Shipman 1310 universal, precision ID/OD grinder, high accuracy, suitable for precision engineering and gauges. We are using it for parts adjustments in our workshop. In very good original condition, from 1st owner (We are the second but we are using only a few hour a week, and keep it clean and tidy) I has almost all accessories, even those are not normally supplied with used or new grinder. See photos please. Jones and Shipman is a high quality, top workmanship, universal, reliable, well designed and done, Easy to operate, precision machine for fine and complex jobs. The machine has universal wheelhead, adjstable to any angles required. The machine is very quiet, has precise semi automatic feed mechanism. Metric machine. We do not know the year of machine but it h ...