injection moulding machines used for sale

screw size: 133 mminjection shot weight in Polysterol: 5940 g/PSclosing pressure: 8000 kNtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Manufacturer Arburg Type 305 700-210 28.000 h runhour Control Polytronica Built in 1991 Operating hours h 28000 Closing unit Closing force t 70 Opening path mm max.375 Holm size mm 305 x 305 Spraying unit Screw diameter mm 30 Spray volume cm3 106 Spray weight gr 90 Spray pressure bar 2050 Other sprue picker

Manufacturer Demag Type D 125-275 Control NC 3 Built in 1990 Closing unit Closing force t 125 Opening path mm 430 Holm size mm 460 x 460 Plate size 700 x 700 Spraying unit Screw diameter mm 38 Spray volume cm3 170 Spray weight gr 156 Dimensions and weights Dimensions LxWxH m 5.5 x 1.5 x 2 Machine weight Kg 6500 Other core pulling: 2 pcs Euromap 12

Producer Demag Type of machine D 60-182 Type of control NC 3 Year 1991 unit Clamping Clamping force t 60 Opening stroke mm 310 Distance between tie bars mm 320 x 320 Mould fixing platen size h x v 480 x 480 Injection unit Screw size mm 28 Injection volume cm3 70 Injection pressure increased bar 1840 SIZE AND WEIGHT Dimension LxWxH m 4.3 x 1.1 x 2.0 Total weigt Kg 3000 Additional information Euromap 12

Euromap classification: 2500-450 Closing Power: 45o Ton Year of Manufacture: 1991 Power: 83 kW Weight: 22,500 kg The press has always worked very little. A year and a half ago a Bmb technician completely overhauled the press and the injection screw. We have an additional new injection screw for greater flow.

Engel injection moulding machine Type: It 2000 / 650 control: EC88 year: 1991 Clamping unit Clamping force t 650 Gap mm: 900 Holm dimension mm: min/max height of 1025 x 925 mm: 600 x 1120 Plate size: 1500 x 1390 injection unit Screw diameter mm: Gr 70 injection weight: 1050 Injection volume cm m³: 1154 Spray pressure bar: 1440 Dimensions and weights Dimensions Lxwxh m: 9.8 x 2.7 x 2.3 machine weight kg: 30,000/10,000 Miscellaneous Sanzgiri SMB 621 CM robot system, model 1998 cascade system 4 core puller

Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW  ... more information

B&A REF: 8985 TON: 150 SHOT WEIGHT: 370 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 1560AR PLATEN SIZES: 690 X 690MM DBTB: 460 X 460MM MIN MOULD HEIGHT: 155MM MAX MOULD HEIGHT: 560MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 160MM CONTROLS: SEF 90 ROBOT INTERFACE: EUROMAP 12

Description: Serial nummer 152562 Clamping force: 500 kN Mould opening force, max.: 130 Kn Size of mould platens: 400 x 400 Distance between tie bars: 270 x 270 Mould opening stroke: 325 Mould height min.: 225 Max daylight: 550 Hydraulic ejector - stroke: 125 Ejector force forward/backward: 31 Screw diameter: 30 mm Ls/D ratio: 16,5 Injection pressure: 1290 bar Stroke volume: 70 ccm Shot weight, PS: 58 g Injection rate: 165 ccm/s Injection stroke: 100 mm Screw speed: 62 m/min Nozzle pressure: 60 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 15 kW Installed heating capacity: 3,9 kW Reservoir capacity:190 ltr.Operating voltage 380 V, 50 Hz Heating 4,0 kW Pump motor 15 kW Total load 19,0 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 3700 x 1750 x 2000 mm Weight 1720 kg Approx. Onsite Dimension. (l x w x h): 3,700 x 1,750 x ...

Description: serial numberr 160654 Clamping force 1000 KN Mould opening force, max.: 35 / 390 kN Size of mould platens 545 mm x 545 mm Distance between tie bars 370 mm x 370 mm Mould opening stroke: 500 mm Mould height min.: 250 mm Max daylight: 750 mm Hydraulic ejector - stroke: 175 mm Ejector force forward/backward: 40 kN Injection unit Screw diameter: 35 mm Ls/D ratio: 20 Injection pressure: 1750 bar Stroke volume: 115 ccm Shot weight, PS: 121 g Injection rate: 190 ccm/s Injection stroke: 150 mm Screw speed: 513 r/min. Nozzle pressure: 70 kN Electric and Hydraulic Equipment Nominal capacity of pump motor: 18,5 kW Installed heating capacity: 5,4 kW Reservoir capacity: 240 ltr. Operating voltage 420 V, 50 Hz Total load 24,1 kW Max. fuze rating 80 A Control voltage 24 VDC Short circuit current rating 10 KA Dimension 4230 x 1500 x 1600 mm Weight 3090 kg Approx. Onsite Dimension. (l x w x ...

BMB HC 1000-9000 HB Injection Moulding Machine 900 Ton Distance between columns : 1000 mm x 1000 mm Machine is in good condition ... more information

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

There are two identical injection moulding machines available, closing force: 1750kN, screw diameter: 70mm, stroke volume: 690cm³, opening stroke: 1000mm, installation height: 350mm, weight: 10.5t, an inspection is possible. ... more information

Clamping force: 800kN, weight: 4.3t. ... more information

Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working) ... more information

Description bi-injection machine vertical injection with 20mm diameter screw hoist capacity 200kg height from the ground 3800mm ... more information

Clamping force:5,000 N Screw diameter:30 mm Total height:1,950 cm Total weight: 3,400 kg Spray weight: 88 g Total length: 4,500 cm Total width: 1,250 cm Displacement 98 cm³ Engine power 15 kW. Heating Capacity: 6.9 k W Ejector force: 2,540 N Ejector stroke: 100 mm Input power: 15 kW (20.39 hp) Panel width: 550 mm Panel length 320 mm Screw diameter 30 mm Displacement 98 cm³ Specific injection pressure 1450 bar Screw speed 20-480 1/MIN Heating capacity 6.9 kW Nozzle contact force 28 kN Opening travel 330 mm, Ejector travel 100 mm, Ejector force 25.4 kN Oil tank 160 L

Built in 1991 Clamping force: 85 tons. Screw diameter: 30 mm  ... more information

Used injection molding machine Dr. Boy 30 M + Screen controlled machine mipronic + Sold in functional tested or partially overhauled condition. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 255 mm (height) x 255 mm (width) 400V / 50 Hz Operating instructions More Dr. Boy injection molding machines from 220 KN to 80 KN in stock More Dr. Boy Injection Moulding Machine 30 M mipronic (Schleicher Control) in stock Plasticizing cylinder 18 mm, born in 1990 Sample photo Offer subject to change

Inv. Num. : 6582 Type: ES 330/65 Producer: ENGEL Produced: 1991 Parameters: Clamping force: 650 kN Screw diameter: 35 mm Injection capacity: 154 cm³ Height of the clamping plate: 570 mm Min. width of the clamping plate: 552 mm Distance between stands (horizontal): 405 mm Distance between stands (vertical): 345 mm Injection weight: 4000 kg