subcategories
(3rd category level)
Manufacturer:
(Category: 104)
Description: -Approx. Onsite Dimension. (l x w x h): 1,100 x 800 x 1,600 mm, weight approx.: 150 kg ... more information
Grinding length: 600mm, grinding width: 375mm, workpiece height: 375mm, magnetic table dimensions X/Y: 600mm/400mm, grinding wheel dimensions: 300mm/50mm, max. table speed: 30m/min, grinding wheel speed: 1450rpm, weight: approx. 3500kg, dimensions X/Y/Z: 2800mm/2500mm&2500mm. Guideway run-in, no oil pockets, magnet failure X and Y axes 0.01mm and 0.02mm respectively. Machine in good working order. Documentation available.
Description: Table dimensions: 500 x 150 mm With 1 groove Grinding wheel diameter: 120 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,600 mm ... more information
Grinding diameter: 315mm, grinding length: 2500mm, center height: 165mm, speed: 500rpm (10 steps), spindle bore diameter/taper: 30mm/MK4, grinding wheel diameter: max. 500mm, table size: 3500mm/310mm, table tilt: approx. 4.8°, longitudinal feed of the table: 5-2680mm, feed: 50-4000mm/rev. Weight: approx. 7400kg, Dimensions X/Y/Z: 6500mm/1700mm/2000mm. Headstock defective, can be repaired.
Description: Consisting of 2 plates Plate diameter: 200 mm eachApprox. Onsite Dimension. (l x w x h): 700 x 600 x 300 mm, weight approx.: 70 kg ... more information
Grinding length: 1000mm, center height: 180mm, max. external grinding diameter: 360mm, max. internal grinding diameter: 260mm, max. internal grinding depth: 300mm, max. workpiece weight: 200kg. B-axis on workpiece holder headstock: 0-180°, B-axis positioning: 0.001°, headstock stroke: 320mm, workpiece holder slide stroke(Z): 1300mm, grinding wheel: 500mm/60mm/100mm/203mm, speed: 20-45m/sec. Internal grinding spindle diameter: 120mm, quill stroke: 60mm, Speed: 1200rpm. Dimensions X/Y/Z: 4340mm/2250mm/2200mm, weight: approx. 7100kg, control: Siemens Sinumerik. Documentation available. On-site inspection is possible.
Description: Machine number: 60745846 Grinding wheel diameter: approx. 180 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,300 mm ... more information
Description: Technical specs: Workhead taper: ISO40/Morse taper 4 Table size: 800x130 mmApprox. Onsite Dimension. (l x w x h): 1,040 x 1,100 x 1,550 mm, weight approx.: 550 kg ... more information
Description: table diameter: approx. 400 mmApprox. Onsite Dimension. (l x w x h): 700 x 900 x 1,800 mm, weight approx.: 1,000 kg ... more information
Description: serial number: 71.180 table dimensions: 700 x 380 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,500 x 2,000 mm, weight approx.: 2,500 kg ... more information
Description: grinding wheel diameter: 40 mmApprox. Onsite Dimension. (l x w x h): 650 x 620 x 1,100 mm, weight approx.: 100 kg ... more information
Description: max. table movement: X = 650 mm, Y = 230 mm grinding height between table and disc (at 205 mm diameter) 47/400 mm magnetic plate 500 x 200 mm max. table load incl. magnet 200 kg rapid traverse of X = 25 m/min, Y = 0.4 m/min, Z = 1 m/min max. grinding wheel diameter 225 mm grinding disc bore 50,8 mm grinding wheel speed 3000 rpm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,700 x 1,900 mm
grinding length: 1,000 mm, magnetic plate size: 1000 x 350 mm, grinding wheel width x diameter: 400 mm, rapid motion: 35 m/min, total power requirement: 30 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 4,600 x 2,000 x 2,450 mm ... more information
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2,5 EW20° 2GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2,5 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2.25 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M1.5 EW20° 3GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls FANUC 0I-TFP WORKING RANGE CYLINDRICAL GRINDING swing diameter (max): 350 mm workpiece weight between centers (max): 80 kgWORKING RANGE EXTERNAL GRINDING grinding diameter (max): 350 mm grinding length: 500 mmWORKPIECE SPINDLESTOCK spindle revolutions (max): 1500 /min drive power: 3 kW spindle bore diameter: 30 mm tool fixture: MK 5 c-axis: yes - positioning/indexing: 0.5 °TAILSTOCK distance betw. centers (max): 400 mm sleeve stroke: 60 mm taper: MK 4 SPINDLESTOCK GRINDING SPINDLE X-axis travel: 370 mm Z-axis travel: 500 mm tilting range (B-direction) min: 60 ° drive power: 9 kWGRINDING TOOL diameter (max): 500 mm borehole: diameter: 203. ...
grinding wheel size: 300x145x160 mmCeramic grinding discs for tooth flank grinding - 145 mm wideDimensions according to machine type ReishauerT1SP 300x145x160 M2,5 EW20° 5GG from the company 3MProfiling according to specification module m, running speed gg, pressure angle EWAdvantages:- Grinding burn risk is close to zero- Up to 50% shorter sanding times- 2-fold reduction in dressing effort- Twice the service life of grinding discs- Continuous, consistent sanding performance- Significantly higher sanding parameters than with standard toolsTranslated with DeepL.com (free version)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS conventional TECHNISCHE DATEN Max. Grinding length: 1000 mm Max. Grinding breadth: 250 mm Table-size &nbs p; : 1050 mm Table-size &nbs p; : 250 mm Segmentkopf Durchmesser: 400 mm Table speed: 0 m/min .. to: 35 m/min Grinding spindle required power: 18.5 kWHeavy duty Grinder with motorized tilting table.Grinding spindle is equipped with CBN- grinding wheel.No cooling equipment.