boring mills and machining centers used for sale

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Drilling capacity in steel St 60 40 mm Drilling capacity in cast 50 mm Threads in steel 32 mm Threads cast 42 mm Taper of spindle mount Mt 5 Projection 1.630 mm Quill stroke 310 mm Spindle speed range 40-1,800 RPM Feed areas 0.125 1.25 mm / Rev About 3,7 kW Machine weight 3.8 t Quick change system

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Co ...

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Inv. Num. : 6762 Type: WHN 9 B Producer: TOS Created: 1975 Parameters: Repair history: 30.8.2021: Repair of the rotary table 31.5.2021: Repair of the lubrication system for guide surfaces 18.02.2021: Adjustment of the rotary table coupling 22.10.2020: Replacement of the sealing elements of the hydraulic cylinder of the tool clamping Replacement of the tool support bearings Replacement of hydraulic hoses for tool clamping 21.10.2019: Replacement of the electromagnetic clutch 09.10.2019: Brush holder - carbon 31.1.2017: adapted quick-shift clutches with replaced spark plugs and shift knobs on the "Y" axle 11.03.2017: Lockshift clutch

Inv. Num. : 6702 Type: WHN 9B Producer: TOS Created: 1975 Parameters: X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 1000 mm Equipment: DRO  ... more information

Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW  ... more information

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Date of overhaul: 2002, 2011 Axis height over bed: 1500 mm Speed: 0 – 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4 000 mm D 46 – 65 mm L = 6 000 mm D 66 – 85 mm L = 8 000 mm D 86 – 105 mm L = 12 000 mm D 106 – 125 mm L = 16 000 mm D 126 – 200 mm L = 24 500 mm D 201 – 250 mm L = 24 500 mm D 251 – 555 mm L = 18 000 mm

Date of overhaul: 2004 Axis height over bed: 800 mm Speed: 0 – 315 rpm Range of diameters and length of drilling on one side:. D 35 – 45 mm L = 4 000 mm D 46 – 65 mm L = 6 000 mm D 66 – 85 mm L = 8 000 mm D 86 – 105 mm L = 12 000 mm D 106 – 125 mm L = 16 000 mm D 126 – 200 mm L = 24 500 mm D 201 – 250 mm L = 24 500 mm D 251 – 555 mm L = 18 000 mm

Specifications: Tool holder: MK 4 Drilling capacity: 40 mm Speed range: 56 - 1250 1/min Spindle stroke: 240 mm Feeds: 0.06 - 0.84 mm/rev Table size: 1040 x 380 mm Projection: 360 mm Column diameter: 240 mm Motor power: 6.5 kW Connection: 400 V Weight, approx.: 2300 kg Dimensions (WxDxH), approx.: 1260 x 1806 x 2820 mm Equipment: - Feed device - Drilling depth stop - Coolant foot - Emergency stop push button

bore capacity in steel (diameter):40 mmarm length:1200 mmworkpiece height max.:1227 mmsurface area:1475 x 900 mmno. of flutes:3 groove width:25/ 50 mmspindle cone:MORSE 4 number of spindle speeds:45- 2800 U/minspindle headstock:Bew.Arm : 945 mmwith vertical adjustment:Arm 710 mmspindle diameter:35 mmbore depth:300 mmtotal power requirement:3,0 kWweight of the machine ca.:2800 kgdimensions of the machine ca.:2290 x 910 x 2860 mm

bore capacity in steel (diameter):40 mmarm length:1200 mmworkpiece height max.:1227 mmsurface area:1475 x 900 mmno. of flutes:3 groove width:25/ 50 mmspindle cone:MORSE 4 number of spindle speeds:45- 2800 U/minspindle headstock:Bew.Arm : 945 mmwith vertical adjustment:Arm 710 mmspindle diameter:35 mmbore depth:300 mmtotal power requirement:3,0 kWweight of the machine ca.:2800 kgdimensions of the machine ca.:2290 x 910 x 2860 mm

Inv. Num. : 6957 Type: WHN 13 Produzent: TOS Erzeugt: 1976 Parametern: Arbeitstischlänge: 1800 mm Arbeitstischbreite: 1800 mm Maximale Tischbelastung (gleichmäßig): 120.000 kg Verfahrwege X-Achse: 3000 mm Verfahrwege Y-Achse: 2000 mm Verfahrwege Z-Achse: 800 mm Spindeldurchmesser: 130 mm DRO

bore capacity in steel (diameter): 100 mmarm length: 3000 mmworkpiece height max.: 2500 mmbore capacity in cast iron: 120 mmcore boring capacity in St 60 - reboring: 170 mmthreading: M120 x 2 diameter of quill: 100 mmspindle taper MT: 6 turning speeds: 18-1800 U/minFeed: 0,037-2 mm/Usurface area: 1550x3150 mmtotal power requirement: kWweight of the machine ca.: 14 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 16000 mmx-travel: 3000 mmy-travel: 1200 mmspindle diameter: 150 mmdimension of the ram: mmRadial face slide diameter: mmrotary table:: Defum type: S-1600 Table dimensions: 1500x1500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSerial no .: 6749,optional:floor plaatesClamping angle dimensions (WxHxD): approx. 1800x1500x1000 cm, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Model: 20-19-0 Year built: 1977 Power: 1.5 kW Apmer: 2.6 Turning speed: 2800 rpm  ... more information

Drilling capacity steel/GG: 28/32 mm Spindle holder: 3 MK Projection: 250 mm Table size: 400 x 415 mm Quill stroke: 120 mm Spindle speeds: 140 - 2000 rpm Drive motor: 380 V, 1.1/1.3 kW Space requirement: 830 x 420/600 x 1790 mm Weight: 210 kg  ... more information

Distance between the columns: 1700mm, table dimensions: 1000x1180mmm, max. load: 3t, length: 2600mm, width: 1900mm, height: 2660mm, weight: 10t, including documentation. ... more information

Drill press, drill press, pillar drill press, pillar drill press, tapping machine, tapping machine -Manufacturer: Alzmetall, column drilling machine type AB3ES -Motor: 0.9/1.3 kW -Speeds: 65 - 1750 rpm, infinitely variable -Table size: 300 x 400 mm, travel 550 mm -Spindle mount: MK3 -Spindle stroke: 165 mm - Projection: 290 mm -Columns Ø: 115 mm -Dimensions: 900/560/H1840 mm -Weight: 336 kg