grinding machines used for sale

workpiece diameter: 600 mmworkpiece weight: 400 kgworkpiece height: 300 mmtotal power requirement: 35 kWweight of the machine ca.: 4500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Cylindrical grinding machine COMETA Susy built 1980 Grinding diameter 300 mm Grinding length 800 mm Internal grinding device digital measuring system Mitutoyo Speed and feed variable New magnetic chuck ... more information

MAX DIAMETER 200 MAX LENGHT 2500  ... more information

grinding length:600 mmgrinding width:300 mmtotal power requirement:7,5 kWnumber of spindle speeds:0-3000 grinding wheel motor:7,5 kWABA magnetic table flat grinding machine ... more information

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

Description: Machine number ,1518 Diameter of grinding wheel approx. 200 mmgrinding length: 600 mm, grinding width: 200 mm, grinding height: 500 mm, magnetic plate size: 450x170 mm, table surface area l x w : 730x200 mm, weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,700 x 1,800 x 2,000 mm

Precision surface grinding machine. Grinding area 500 x 1050mm. Magnetic area 450 x 1000mm. Grinding wheel 400 x 60mm. Flat dresser with compensation. Coolant system. Highly accurate. Top condition. Few operating hours. Can be demonstrated at any time.  ... more information

 ... more information

max. wheel diameter: 2500 mmgear width: 1200 mmmax. module: 32 min. module: 3 total power requirement: 25 kWweight of the machine ca.: 60 tdimensions of the machine ca.: mGear , min. / max. 180 / 2,500 mmModule 3 - 32Helix angle, max. 10 - 35 °Gear width for straight gears 1,200 mmStroke length, approx. 100 - 1,200 mmNo. of strokes 80 - 350 /minStroke position adjustable 300 mmStroke speed 4 - 40 mmMax. weight of workpiece, approx. 18,000 kgMin. / max. no. of teeth 16 / 576Table size x bore 1,400 x 500 mmGrinding wheel Ø, approx. 500 mmGrinding wheel peripheral speed 34 m/sTotal electrical load, approx. 45 kW - 380 V - 50 HzWeight of machine, approx. 60,000 kgAccessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with settings for rou ...

x-travel: 650 mmy-travel: 450 mmworkpiece height: 585 mmControl: ADCOS CNC 400 total power requirement: 15 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: mH A U S E R (Switzerland)CNC Controlled Hi Precision Double Column Jig GrinderModel S 40 – CNC 311 / ADCOS 400 CNCYear 1981 / CNC modernized in 2008 # 0126__________________________________________________________________ ___Table size approx. 630 x 770 mmTable load capacity approx. 500 kgTable travel longitudinal max. (X) 650 mmGrinding head slide cross max. (Y) 450 mmVertical adjustment of cross rail max. (W) 500 mmGrinding spindle stroke max. (Z) 140 mmStroke number of grinding head (4cycles)  ...

grinding diameter: 605 mmgrinding length: 5000 mmcentre height: 315 mmpeak cone: 60 °grinding spindle slide adjustment: 300 mmtable - swivable: 7 Gradtable adjustment - longitudinal: 5140 mmgrinding wheel size: 750 x 80 x 305 mmtaper diameter: 305 mmflange diameter: 400 mmmax. workpiece weight between centres: 3000 kggrinding wheel drive: 40 kWmax. workpiece diameter: 630 mmgrinding wheel peripheral speeds:: 35 m/sgrinding wheel turining speeds: 500 - 1100 U/minworkpiece turning speeds: 8 - 120 U/mintable speeds: 30 - 4500 mm/mintotal power requirement: 58,5 kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: - mThe machine was geometrically overhauled in 2020- 8 steady rests (30 - 200 mm)- Suction system- Coolant system with magnet/paper filterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 1500 mmstroke: 0 mmswing dia.: 500 mmtotal power requirement: 30 kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

- Working wheel diameter: 600 mm - Grinding wheel width: 500 mm Conversion of the grinding machine with automatic plunge - automatic diamond coating with adjustment of ribs Machine repair with modification ... more information

Code 101237 Description Universal Cylindrical Grinder Make WMW Heckert Model SA 5 U x 630 Serial No. 3115 Year 1981 Grinding length, max. 630 mm Grinding diameter, max. 275 mm Centerheight 140 mm Max. Weight workpiece 125 kg Table tilting angle - 5° till + 11,5° Diam. Grinding wheel 500 mm Width Grinding wheel, max. 100 mm Motorpower grindingwheel 5,5 kW Speeds workpieceholder 31,5 – 710 rpm Total power 12,5 kVA 380 Volts Machine size L x W x H 3,9 x 2,3 x 1,6 meter Weight 4800 kg Accessories coolant with magnetic some tooling Condition Machine is in good condition

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1410 rpm -Circumferential speed: 45 m/s -grinding wheels: max. Ø 300 mm -Operating voltage: 380 volts -Weight: 290 kg ... more information

Grinding disk diameter: 600mm, controls: Siemens S7, with documentation, was maintained regularly, an inspection is possible. ... more information

drill diameter: 32 mmdrill diameter: 32 mmdrilling length: 0 mmdrilling length: 0 mmlip angle: °lip angle: °total power requirement: kWtotal power requirement: kWweight of the machine ca.: tweight of the machine ca.: tdimensions of the machine ca.: mdimensions of the machine ca.: mUniversal Drill Bit Grinderlots of accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 1981 REFURBISHED: 2016 Scheif-Ø max.: 300 mm Grinding length max.: 750 mm External grinding spindle drive: 5.5 kW External grinding wheel: left External Grinding Wheel Dimensions ØxWxBore Tailstock: manual Tailstock Mounting Cone: MK4 Tailstock stroke max.: 40 mm Workpiece headstock: MK4 Workpiece spindle bore: 24 mm Workpiece weight between tips max.: 200 kg Workpiece weight flying max.: 50 kg Workpiece spindle speed: 32-500 min-1 Strobe lamp for grinding wheel balancing: 1 pc. Grinding wheel flanges: div. External grinding wheels: various Belt filter with pump: 400 l Magnetic chuck Ø: 200 mm 3-jaw chuck Ø: 160 Weight approx.: 3.700 kg Operating Voltage: 380V/50Hz Space requirement LxW approx.: 3,420x2,155x1,700 mm All information is non-binding

Longitudinal stroke max. approx. 680 mm Transverse stroke Max 250 mm greatest distance spindle Center to table top approximately 525 mm Magnet size approx. 600 x 200 x 90 mm Disk size 300 x 50 x 76.2 mm Speed infinitely variable 1000--3000 U/min Dimensions, B x T x H approx. 3.2 x 1.8 x 2.5 m Spindle motor approx. 2.8 8.4 kW Weight of the machine CA. 3,3 tons Facilities: -with automatic vertical delivery -Roughing, Wiles, from fires and lifting by the adjustable potentiometers -Loading position is approached after slipping automatic -Rapid traverse across approx. 1.2 m/min via electric motor -Labour / rapid traverse along approx. 5 mm / min 40 m/min with servo motor and toothed belt drive -Rapid traverse vertical approx. 0.2 m / min -Digital display for lateral and vertical axis -Quick lifting system approximately 180 strokes / min -Straight electric, dresser with size and speed comp ...

The machine is in good technical condition. Max. grinding diameter: 605 mm Max. workpiece diameter: 630 mm Spike distance: 5000 mm Maximum workpiece weight: 3000 kg Machine weight: 18000 kg By prior arrangement, the possibility of a tour in progress. ... more information