- (1)
- Assembly Presses (1)
- Balling Presses (3)
- Bending And Straightening Presses (6)
- Bending Presses (133)
- Blanking Presses (2)
- Bolt Presses (1)
- CNC Bending Presses (7)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (6)
- Die Forging Hammer (4)
- Die Spotting Presses (17)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (111)
- Edge-Merging Presses (9)
- Fine Presses (14)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (5)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (18)
- Horizontal Forging Machines (4)
- Horizontal Presses (7)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (13)
- Hydraulic Fine Blanking Presses (6)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (3)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (24)
- Hydraulic Presses (89)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (9)
- Manually Operated Presses (4)
- Mechanical Presses (17)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (4)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (10)
- Straight-Bending Presses (20)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (13)
- Wire Nail Presses (1)
- Workshop Presses (60)
- more
- A+B FASTECH (3)
- A. U. SÖHNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (7)
- AIDA (2)
- AMADA (13)
- AMBOLD (12)
- AMBROGIO GALLI (1)
- AP+T Lagan (2)
- ARISA (1)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- AYEL-TECH (15)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (2)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- BERGMANN (1)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (6)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BMW (1)
- BOLDRINI (1)
- BONFATTI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (10)
- BRUNNHUBER (1)
- BRÃœCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (4)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CLEARING (1)
- CLUANA (2)
- CoastOne (4)
- COLLY (3)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (5)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (13)
- DUNKES (21)
- DURMA (5)
- DURMAZLAR (1)
- EBU (25)
- ECAI (1)
- Eckold (21)
- EDEL (1)
- EDELHOFF (7)
- EHT (21)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (2)
- EITEL (9)
- EKALE (1)
- ELBARON (1)
- ELUMATEC (5)
- EM HART, TUCKER (1)
- EMANUEL (1)
- ENERPAC (1)
- ... more
Manufacturer:
(Category: 106)
New in: 1985
used
Press capacity: 40 ton Ram stroke adjustable: 8 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 820 mm Table surface area : 810 x 450 mm Slide area: 720 x 350 mm Hole in table: 600 x 110 mm Number of strokes: 100 - 1.000 s.p.m. Table height over floor: 1.030 mm Required power: 19,5 kW Weight of machine approx.: 6,8 ton
New in: 1997
used
Pressure total: 315 ton Ram stroke: 160 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 1.050 mm Free frontal opening L-R: 2.740 mm Free lateral opening F-B: 1.500 mm Distance between oil tray: 2.400 mm Table surface area : 2.740 x 1.800 mm Slide area: 2.400 x 1.700 mm Number of strokes: 10 - 60 s.p.m. Required power: 75,5 kW kW Working hours machine: 77.341 h Height over floor approx.: 5.500 mm Dimensions L x W x H: 5.400 x 3.300 x 5.700 mm Weight of machine approx.: 80 ton Control: Siemens S5
New in: 1970
used
pressure: 180 tdimensions of the machine ca.: 2 x 1,5 x 2 mstrokes per minute: 60 total power requirement: 3 kWweight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
New in: 1985
used
Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7
New in: 1981
used
Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton
New in: 1995
used
Capacity: 100 ton Ram stroke: 6 - 82 mm Slide adjustment: 100 mm Table surface area : 1.200 x 710 mm Slide area: 900 x 500 mm Number of strokes: 50 / 200 s.p.m. Required power: 18,5 kW Dimensions L x W x H: 2700 x 2400 x 3500 mm Weight of machine approx.: 13,5 ton ... more information
New in: 1986
used
Press capacity: 35 ton Ram stroke adjustable: 6 - 50 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 250 mm Free frontal opening L-R: 430 mm Table surface area : 410 x 410 mm Slide area: 307 x 187 mm Hole in table: 170 x 110 mm Number of strokes: 60 - 300 s.p.m. Weight of machine approx.: 2,4 ton
New in: 1989
used
Press capacity: 250 ton Throat depth: 430 mm Stroke: 300 mm Daylight: 500 mm Table surface area : 1.100 x 850 mm Slide area: 1.100 x 850 Table height over floor: 950 mm Approach speed: 330 mm / sec Working speed: 11 - 30 mm / sec Return speed: 330 mm / sec Die cushion capacity in table: 80 ton Die cushion stroke: 100 mm Ejector in ram: 5 ton Ejector stroke in ram: 75 mm Required power: 40 kW Oil volume: 1.400 l Dimensions L x W x H: 3.200 x 2.500 x 4.250 mm Weight of machine approx.: 25 ton
New in: 1980
used
used
Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.
New in: 1994
used
Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher. ... more information
used
Pressing force: 300t, there are also straightening machines and coilers available, with documentation, worked until the end, an on-site inspection is possible. ... more information
New in: 1979
used
Nominal pressing force: 100t, an inspection is possible. ... more information
New in: 1993
used
Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. ... more information
used
Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. ... more information
used
New in: 2001
used
Pressing force: 72kN, stroke: 12-100mm, machine needs overhauling. ... more information
New in: 2016
used
There are two identical benchtop presses available, stroke: 100mm, max. press force: 25kN, weight: 123kg. ... more information
New in: 1966
used
New in: 1960
used
Pressing force: 80t, max. sheet thickness: 11mm, stroke speed: 60/min, ram stroke: 8-112mm. ... more information