- (1)
- Assembly Presses (1)
- Balling Presses (3)
- Bending And Straightening Presses (6)
- Bending Presses (133)
- Blanking Presses (2)
- Bolt Presses (1)
- CNC Bending Presses (7)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (6)
- Die Forging Hammer (4)
- Die Spotting Presses (17)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (111)
- Edge-Merging Presses (9)
- Fine Presses (14)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (5)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (18)
- Horizontal Forging Machines (4)
- Horizontal Presses (7)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (13)
- Hydraulic Fine Blanking Presses (6)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (3)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (24)
- Hydraulic Presses (89)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (9)
- Manually Operated Presses (4)
- Mechanical Presses (17)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (4)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (10)
- Straight-Bending Presses (20)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (13)
- Wire Nail Presses (1)
- Workshop Presses (60)
- more
- A+B FASTECH (3)
- A. U. SĂ–HNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (7)
- AIDA (2)
- AMADA (13)
- AMBOLD (12)
- AMBROGIO GALLI (1)
- AP+T Lagan (2)
- ARISA (1)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- AYEL-TECH (15)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (2)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- BERGMANN (1)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (6)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BMW (1)
- BOLDRINI (1)
- BONFATTI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (10)
- BRUNNHUBER (1)
- BRĂśCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (4)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CLEARING (1)
- CLUANA (2)
- CoastOne (4)
- COLLY (3)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (5)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (13)
- DUNKES (21)
- DURMA (5)
- DURMAZLAR (1)
- EBU (25)
- ECAI (1)
- Eckold (21)
- EDEL (1)
- EDELHOFF (7)
- EHT (21)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (2)
- EITEL (9)
- EKALE (1)
- ELBARON (1)
- ELUMATEC (5)
- EM HART, TUCKER (1)
- EMANUEL (1)
- ENERPAC (1)
- ... more
Manufacturer:
(Category: 106)
New in: 1991
used
Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. ... more information
New in: 1992
used
Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. ... more information
New in: 1981
used
There are two identical eccentric presses available, nominal force: 1000kN, stroke speed: 30-85/min, stroke adjustment: 20-125mm, weight: 8t, year of construction machine 1/ 2: 1978/ 1981, with documentation. ... more information
New in: 1958
used
Stroke adjustment: 29-160mm, ram adjustment: 130mm, stroke speed: 48/min, connected load: 14kW. ... more information
New in: 1989
used
Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. ... more information
New in: 1978
used
Pressing force: 160t, with spare table, without documentation, needs official accident prevention test, has not been serviced for a long time. ... more information
New in: 1999
used
Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K. ... more information
New in: 1994
used
Max. hydraulic pressure: 400bar. ... more information
used
There are two identical cylinders available, max. pressure: 6bar, total stroke: 100mm, power stroke: 12mm, max. press force: 39.9kN, fast approach force: 1700mm, retracting force: 1900N, weight: 20kg. ... more information
New in: 1966
used
Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min. ... more information
used
Pressing force: 100t, throat depth: 300mm, stroke speed: 60/min, stroke adjustment: 10-100mm, motor power: 7,5hp. ... more information
New in: 1994
used
Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. ... more information
New in: 1973
used
Punching force: 75t, with Band Feeder GSW WV32/80, max. band width: 320mm, max. band thickness: 3.5mm, roller diameter: 80mm, an inspection is possible. ... more information
New in: 1975
used
Connected load: 4kW, weight: 2t, an inspection is possible. ... more information
New in: 2013
used
Press force 2000kN, lifting speed: 10mm/s, max. operating pressure: 32MPa, weight: 400kg, with steel base frame, on-site inspection is possible. ... more information
New in: 1992
used
Max. pressing force: 4000kN, max. stroke: 500mm, installation height: 1100mm, table dimensions: 1200x800mm, max. working pressure: 300bar, weight: 23t, with documentation, was maintained regularly, an on-site inspection is possible. ... more information
New in: 1988
used
Distance between the columns: 1100/400mm, max. ram stroke: 2x 1800mm, plunger diameter: 275/150mm, length: 2650mm, width: 2400mm, height: 4850mm, weight: 18t, has received UVV, the press control is defective. ... more information
New in: 1992
used
Working width: 4000mm, pressing force: 160t, control: MNC 95/C, connected load: 18kW, length: 4100mm, width: 1900mm, height: 3100mm, weight: 14.5t, including tools, the documentation is partially available, the laser system requires maintenance. ... more information
New in: 1985
used
Pressure capacity: 500KN, stroke: 8-100mm, stroke rate: 100/min. Ram adjustment: 80mm, drive: 4kW, weight: 2850kg. Safety distance: 175mm, overtravel: 53mm, overtravel time: 110ms. ... more information
New in: 1984
used
Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. ... more information