presses used for sale

Pressure capacity: 85t/850kN, ram stroke: 30-110mm, ram adjustability: 50mm. Documentation available. ... more information

Pressing force: 130t, max. wire diameter: 17mm, cutting length: 150mm, ejector stroke matrix: 125mm, ejector stroke stamp: 58mm. WZ dimensions length/diameter: blade: 80mm/50mm, die: 180mm/90mm, punch: 195mm/75mm. Weight without housing: 27t. Available from 26.08.2024. ... more information

Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg.

PRESS DESIGN  feedstock transport direction: left to right PRESS FORCES  total force (nominal): 40 toSLIDE  stroke: 57 mm  stroke rate (max.): 1200 /minSLIDE (MECHAN. PRESS)  stroke adjustment: yes   stroke min.: 13 mm  stroke max.: 57 mm  variable speed: yes   stroke rate (min.): 70 /min  stroke rate (max.): 1200 /min

CONTROLS  PLC SIEMENS S7 PRESS DESIGN  drive system: link drive   feedstock transport direction: left to right SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 22 to  stroke: 8 mmV-RING  nominal force: 25 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 220 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mm  feed velocity max. ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 40 toPRESS TABLE  table surface (left-right): 670 mm  table surface (front-back): 405 mm  thickness of bolster plate: 60 mm  height above floor level: 810 mm  opening in bed (diameter): 120 mmSLIDE  table surface (left-right): 315 mm  table surface (front-back): 155 mm  spigot hole diameter: 38 mm  stroke: 75 mm  stroke rate (max.): 140 /minSLIDE (MECHAN. PRESS)  slide adjustment: 50 mm  stroke min.: 5 mm  stroke max.: 75 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 330 mm  throat (C-frame): 200 mmELECTRICAL SPECIFICATIONS  total power consumption: 4 kW  mains voltage: 400 V  main ...

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   table cushion: no PRESS FORCES  total force (nominal): 125 toPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 630 mmSLIDE  table surface (left-right): 700 mm  table surface (front-back): 400 mm  stroke: 150 mm  stroke rate (max.): 70 /minSLIDE (MECHAN. PRESS)  slide adjustment: 90 mm  stroke adjustment: yes   stroke min.: 15 mm  stroke max.: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 70 /min  main drive power: 15 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 400 mmELECTRICAL SPECIFICATIONS ...

PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: right to left SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (max.): 70 /minCOUNTER RAM  nominal force: 22 toV-RING  nominal force: 25 toTOOL DIMENSIONS  lower table (left-right): 430 mm  lower table (front-back): 490 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 230 mm  ram adjustment: 80 mm  distance between columns (H-frame): 450 mm  passline opening (free passage in side columns): 200 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 180 mm  sheet thickness max.: 5 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thicknes ...

SLIDE  total force (nominal): 880 to  stroke: 305 mm  cutting velocity min.: 5 mm/s  cutting velocity max.: 70 mm/s  closing velocity: 200 mm/s  returning velocity: 200 mm/sV-RING  nominal force: 400 to  stroke: 40 mmCOUNTER RAM  nominal force: 200 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 1010 mm  lower table (front-back): 1600 mm  upper table (left-right): 1000 mm  upper table (front-back): 1000 mm  shut height max.: 460 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 450 mm  sheet thickness max.: 16 mm  feeding step min.: 1 mm  feeding step max.: 999.9 mm  sheet length min: 3950 mm  speed max.: 48 m/min  Vertical adjustment: 140 ...

CONTROLS  PLC SIEMENS S7 SLIDE  total force (nominal): 250 toSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 10 mm/s  working velocity max.: 44 mm/s  return velocity max.: 200 mm/sCOUNTER RAM  nominal force: 63 toV-RING  nominal force: 100 toTOOL DIMENSIONS  lower table (left-right): 500 mm  lower table (front-back): 500 mm  upper table (left-right): 695 mm  upper table (front-back): 730 mm  shut height max.: 360 mmATTACHMENTS -FINEBLANKING PRESS-  light barrier: yes   closed cabin: yes   decoiler: optional   leveller unit: optional   waste cutter: yes   slug separator: yes

CONTROLS  electronic controls SLIDE  total force (nominal): 40 toTOOL DIMENSIONS  lower table (left-right): 280 mm  lower table (front-back): 280 mm  upper table (left-right): 280 mm  upper table (front-back): 280 mmOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 100 mm  sheet thickness max.: 4 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1800 mm  space requirements -front/back-: 1840 mm  total height: 1350 mm  total weight approx.: 2500 kg

CONTROLS  PC controller BECKHOFF PRESS DESIGN  drive system: knuckle-joint SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 15 mmV-RING  nominal force: 75 to  stroke: 13 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mm  distance between columns (H-frame): 560 mm  passline opening (free passage in side columns): 270 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step max.: 999.99 mm  sheet  ...

CONTROLS  PLC BECKHOFF PRESS DESIGN  drive system: knuckle-joint   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 67 mm  stroke rate (max.): 80 /minCOUNTER RAM  nominal force: 125 toV-RING  nominal force: 125 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 560 mmSTRIP-FEEDER  feeder type: roll feeder DIMENSIONS / WEIGHTS  total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   waste cutter: yes + Control system completely renewed in 2015

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6  ... more information

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 6   table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted ... more information

CONTROLS  PLC PNEUTRONIC PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /minCOUNTER RAM  nominal force: 75 to  stroke: 13 mmV-RING  nominal force: 75 to  stroke: 15 mmTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mm  shut height max.: 320 mm  ram adjustment: 145 mmSTRIP-FEEDER  feeder type: roll feeder   pilot release system: yes ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...

CONTROLS  PLC SCHNEIDER PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 11   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 66 toSLIDE  slide force: 6 to  stroke: 114 mmSLIDE (MECHAN. PRESS)  variable speed: yes   stroke rate (min.): 40 /min  stroke rate (max.): 130 /min  main drive power: 7.5 kWSTRIP-FEEDER  feeder type: roll feeder TRANSFER SYSTEM  distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 2875 mm  space requirements -front/back-: 1500 mm  total height: 2900 mm  total weight approx.: 7500 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   n ...

PRESS DESIGN  drive system: hydraulic   openings in uprights: yes   number of suspensions: 1   number of slide actions: 1   slide ejectors / cushion: yes   opening in table: no PRESS FORCES  total force (nominal): 800 toPRESS TABLE  table surface (left-right): 1300 mm  table surface (front-back): 1300 mmSLIDE  stroke: 700 mmSLIDE EJECTOR / CUSHION  nominal force: 5 to  stroke: 20 mmTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1200 mm  distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS  total power consumption: 400 kWDIMENSIONS / WEIGHTS  total height: 6100 mm  total weight approx.: 55000 kgATTACHMENTS (PRESSES)  press automation: yes   acc. to actual accident protection r ...

PRESS DESIGN  drive system: eccentric / crank   frame design: H-frame, tie rod   openings in uprights: yes   table cushion: yes   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1780 mm  table surface (front-back): 1300 mm  opening in bed (left-right): 1445 mm  opening in bed (front-back): 260 mmSLIDE  slide force: 200 to  table surface (left-right): 1500 mm  table surface (front-back): 1100 mm  stroke: 178 mm  stroke rate (max.): 120 /minSLIDE (MECHAN. PRESS)  slide adjustment: 150 mm  stroke rate (min.): 20 /min  stroke rate (max.): 120 /minDIE CUSHION (TABLE CUSHION)  number of cushions: 11   cushion force:  ...

CONTROLS  PC controller FEINTOOL FMC (BECKHOFF) PRESS DESIGN  drive system: servomechanic   feedstock transport direction: left to right SLIDE  total force (nominal): 250 to  stroke: 70 mm  stroke rate (max.): 140 /minCOUNTER RAM  nominal force: 625 to  stroke: 25 mmV-RING  nominal force: 1250 to  stroke: 25 mmTOOL DIMENSIONS  lower table (left-right): 600 mm  lower table (front-back): 600 mm  upper table (left-right): 600 mm  upper table (front-back): 600 mm  shut height max.: 380 mm  ram adjustment: 125 mmSTRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mm  feeding step min.: 0.1 mm  feeding step max.: 300 mm  sheet length min: 2500 mmCROP SHEAR  stroke  ...