Manufacturer:
(Category: 106)
Pressing force: 630kN/63t, operating pressure: 270bar, stroke: 400mm, installation height: 600mm, throat depth: 280mm, oil filling: approx. 650l, weight: approx. 5200kg. Documentation available. On-site inspection is possible. ... more information
Pressing force: 2000kN, working width: 3600mm, max. stroke: 400mm, throat depth: 500mm, stops: 6, control: DNC 7000, weight: approx. 21000kg. Including various lower tools and dies with bolts as well as a holding rail. For example, prisms 7-90 and punches (straight and cranked) are included. Documentation is available. On-site inspection is possible.
There are 5 identical Otto Kaiser Pforzheim foot-operated toggle presses available. The pressing force is probably 120 kN. ... more information
pressure: 200 tstroke: 500 mmtable:: 1000 - 800 feed down: 150 -280 mm/secfeed under pressure: 10 - 26 mm/secfeed up: 180 - 300 mm/sectable height over floor: 750 mmtotal power requirement: 22 kWweight of the machine ca.: 7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 720 tstroke: 15 mmtotal power requirement: 3 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 1300 x 1800 x 2200 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information
PRESS DESIGN number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE stroke: 44 mm stroke rate (max.): 160 /minThis machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformityNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 44 mm.Standard stroke cams.Max blank diameter 47 mm.Operating speed range 40 to 160 SPM max.Machine weight approx. 3200 kg.
PRESS FORCES total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank frame design: C-frame, single sided number of suspensions: 1 PRESS FORCES total force (nominal): 200 toPRESS TABLE table surface (left-right): 1400 mm table surface (front-back): 800 mmSLIDE table surface (left-right): 1000 mm table surface (front-back): 600 mmSLIDE (MECHAN. PRESS) slide adjustment: 120 mm autom. Slide adjustment: yes stroke min.: 20 mm stroke max.: 200 mm stroke rate (max.): 45 /min hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION) number of cushions: 1 TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 510 mmELECTRICAL SPECIFICATIONS mains voltage: 380 VDIMENSIONS / WEIGHTS ...
PRESS DESIGN drive system: eccentric / crank number of slide actions: 10 SLIDE stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm (1- 1-3/8")#2 to #10 25-41 mm, (1 - 1-5/8")Speed: 110 SPM
CONTROLS PLC PNEUTRONIC PRESS DESIGN drive system: knuckle-joint frame design: H-frame, monoblock feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 13 mmV-RING nominal force: 75 to stroke: 15 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mmSTRIP-FEEDER feeder type: roll feeder pilot release system: yes ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS   ...
CONTROLS PLC BECKHOFF SLIDE total force (nominal): 80 to stroke: 50 mm stroke rate (min.): 28 /min stroke rate (max.): 70 /minV-RING nominal force: 25 toCOUNTER RAM nominal force: 22 toTOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 200 mm sheet thickness max.: 5 mm feeding step min.: 0 mm feeding step max.: 999 mm pilot release system: yes measuring wheel: optional ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzATTACHMENTS -FINEBLANKING PRESS- waste cutter: yes Example of an overhaule ...
PRESS DESIGN drive system: hydraulic openings in uprights: yes number of suspensions: 1 number of slide actions: 1 slide ejectors / cushion: yes opening in table: no PRESS FORCES total force (nominal): 800 toPRESS TABLE table surface (left-right): 1300 mm table surface (front-back): 1300 mmSLIDE stroke: 700 mmSLIDE EJECTOR / CUSHION nominal force: 5 to stroke: 20 mmTOOL ASSEMBLY DIMENSIONS distance table - slide max.: 1200 mm distance between columns (H-frame): 1325 mmELECTRICAL SPECIFICATIONS total power consumption: 400 kWDIMENSIONS / WEIGHTS total height: 6100 mm total weight approx.: 55000 kgATTACHMENTS (PRESSES) press automation: yes acc. to actual accident protection r ...
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 ... more information
PRESS DESIGN drive system: eccentric / crank number of slide actions: 6 table cushion: yes 6 stations plus auxiliary stationUsed for eyelet production - tooling still mounted ... more information
CONTROLS PLC SCHNEIDER PRESS DESIGN drive system: eccentric / crank number of slide actions: 11 feedstock transport direction: left to right PRESS FORCES total force (nominal): 66 toSLIDE slide force: 6 to stroke: 114 mmSLIDE (MECHAN. PRESS) variable speed: yes stroke rate (min.): 40 /min stroke rate (max.): 130 /min main drive power: 7.5 kWSTRIP-FEEDER feeder type: roll feeder TRANSFER SYSTEM distance between tools, stroke X fixed: 82 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 2875 mm space requirements -front/back-: 1500 mm total height: 2900 mm total weight approx.: 7500 kgATTACHMENTS (PRESSES) safety guard / safety door: yes 2-hand engagement: yes n ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: knuckle-joint SLIDE total force (nominal): 250 to stroke: 61 mm stroke rate (max.): 60 /minCOUNTER RAM nominal force: 75 to stroke: 15 mmV-RING nominal force: 75 to stroke: 13 mmTOOL DIMENSIONS lower table (left-right): 540 mm lower table (front-back): 540 mm upper table (left-right): 540 mm upper table (front-back): 540 mm shut height max.: 320 mm ram adjustment: 145 mm distance between columns (H-frame): 560 mm passline opening (free passage in side columns): 270 mmSTRIP-FEEDER feeder type: roll feeder sheet width max.: 250 mm sheet thickness max.: 10 mm feeding step max.: 999.99 mm sheet ...
CONTROLS PLC BECKHOFF PRESS DESIGN drive system: knuckle-joint feedstock transport direction: left to right SLIDE total force (nominal): 250 to stroke: 67 mm stroke rate (max.): 80 /minCOUNTER RAM nominal force: 125 toV-RING nominal force: 125 toTOOL DIMENSIONS lower table (left-right): 560 mm lower table (front-back): 600 mm upper table (left-right): 560 mm upper table (front-back): 560 mmSTRIP-FEEDER feeder type: roll feeder DIMENSIONS / WEIGHTS total weight approx.: 14000 kgATTACHMENTS -FINEBLANKING PRESS- decoiler: optional waste cutter: yes + Control system completely renewed in 2015
CONTROLS PLC PRESS DESIGN drive system: eccentric / crank number of slide actions: 12 PRESS FORCES total force (nominal): 36 toSLIDE slide force: 3 to stroke: 38 mmSLIDE (MECHAN. PRESS) variable speed: yes main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 50 mm feedstock transport direction: front-back STRIP-FEEDER feeder type: roll feeder sheet width max.: 50 mm pilot release system: no band lubrication system: optional TRANSFER SYSTEM number of tool stations: 13 distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2400 mm ...
PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 250 toPRESS TABLE table surface (left-right): 1500 mm table surface (front-back): 920 mm thickness of bolster plate: 130 mm opening in bed (diameter): 200 mm opening in bed (left-right): 515 mm opening in bed (front-back): 385 mmSLIDE table surface (left-right): 1000 mm table surface (front-back): 600 mm spigot hole diameter: 65 mm stroke: 200 mm stroke rate (max.): 40 /minSLIDE (MECHAN. PRESS) slide adjustment: 120 mm stroke min.: 0 mm stroke max.: 200 mm hydraulic overload protection: yes main drive power: 22 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 550 mm ...
PRESS FORCES total force (nominal): 80 toPRESS TABLE table surface (left-right): 950 mm table surface (front-back): 560 mm thickness of bolster plate: 90 mm opening in bed (diameter): 90 mm opening in bed (left-right): 335 mm opening in bed (front-back): 250 mmSLIDE table surface (left-right): 540 mm table surface (front-back): 420 mm spigot hole diameter: 50 mm stroke: 123 mm stroke rate (max.): 65 /minSLIDE (MECHAN. PRESS) slide adjustment: 65 mm stroke min.: 4 mm stroke max.: 123 mm hydraulic overload protection: yes main drive power: 5.5 kWTOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 430 mm throat (C-frame): 280 mm distance between columns ...