- (11)
- Assembly Presses (1)
- Balling Presses (3)
- Bending And Straightening Presses (6)
- Bending Presses (155)
- Blanking Presses (2)
- Bolt Presses (1)
- CNC Bending Presses (7)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (6)
- Die Forging Hammer (4)
- Die Spotting Presses (18)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (112)
- Edge-Merging Presses (9)
- Fine Presses (14)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (5)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (17)
- Horizontal Forging Machines (4)
- Horizontal Presses (8)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (13)
- Hydraulic Fine Blanking Presses (6)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (2)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (24)
- Hydraulic Presses (95)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (10)
- Manually Operated Presses (4)
- Mechanical Presses (21)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (4)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (10)
- Straight-Bending Presses (20)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (14)
- Wire Nail Presses (1)
- Workshop Presses (59)
- more
- A+B FASTECH (3)
- A. U. SĂ–HNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (7)
- AIDA (2)
- AMADA (18)
- AMBOLD (12)
- AMBROGIO GALLI (1)
- AP+T Lagan (2)
- Arisa (2)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- AYEL-TECH (15)
- AYUTOR (1)
- BAIER (1)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (2)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- BERGMANN (1)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (6)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BMW (1)
- BOLDRINI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (11)
- BRUNNHUBER (1)
- BRĂśCK (1)
- BUCHER-GUYER (1)
- BURGER (1)
- Bussmann (3)
- BYSTRONIC (6)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CLEARING (1)
- CLUANA (2)
- CoastOne (4)
- COLLY (5)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (5)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DEUTSCHE VEREINIGTE (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (13)
- DUNKES (21)
- DURMA (6)
- DURMAZLAR (1)
- EBU (25)
- ECAI (1)
- Eckold (21)
- EDEL (1)
- EDELHOFF (7)
- EHT (22)
- EIGEN (1)
- EIGENBAU (1)
- EISENWERK HENSEL (2)
- EITEL (9)
- EKALE (1)
- ELBARON (1)
- ELUMATEC (6)
- EM HART, TUCKER (1)
- ... more
Manufacturer:
(Category: 106)
New in: 2018
used
Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 , ,V12 3215 , ,V24 3234 , ,V50 3223 , ,V100 3040 , ,V12 , ,26 gr. , , ,R3 Hemming die BMR 55.16.30 , , , , , , V16 30 gr. Top tool: 1310 , , , , , , , , , , 85 gr. , , ,R0.8 H115 1030 , , , , , , , , , , 88 gr. , , ,R0.8 H145 TOP.175.26. , , , , 26 gr. , , ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...
New in: 2021
used
Description: The Adira PA16030 is an unused press brake with a 1600 kN capacity and 3000 mm working length. Control Control System: CYB Touch 8 Numerical Control: Cybelec VisiPAC Working Parameters Condition: New/Unused Capacity: 1600 kN Working Length: 3000 mm Distance Between Housings: 2550 mm Max Stroke: 260 mm Max Open Height Without Tools: 500 mm Throat Depth: 400 mm Motor and Power Motor Power: 15 kW Speed Approach Speed: 150 mm/s Working Speed: 10 mm/s Returns Speed: 150 mm/s Speed X: 800 mm/s Speed R: 200 mm/s Speed Z-Z1/Z2: 1200 mm/s Speed X1: 100 mm/s Axis Travel Stroke X: 625 mm Stroke R: 200 mm Stroke Z-Z1/Z2: 90 to 2150 mm Stroke X1: +/- 100 mm Dimensions Length: 3760 mm Width: 1840 mm Height: 2910 mm Transportation Height: 2710 mm Weight Weight: 7900 kg Extra Equipment Table: 13 mm for Wila type Dies 'Table Kit III' Back Gauge: Z1/Z2 Front Support Arms: 2 arm ...
New in: 1975
used
Description: Serial Number: 74-20-0293 Width between uprights: ,3700 mm , Table surface: 3350x2134 nn Punch stroke: 762 mm , Distance between plate: 1322 Strokes per minute: 16/min Table openings: 3 Main motor: 90 kw 1500rpm Punch Motor: 7.5kw 1500 rpm , Lubrication equipment: 0.75kw 1500 rpm , Pump motor power: 1.1 kw 3000rpm , Voltage: 220V, 50 hz Pneumatic installation: , Surface area: 1420x990 mm , Piston diameter: 800 mm , Stroke of plunger 305 mmm , Total power: 180Mp ,Approx. Onsite Dimension. (l x w x h): 4,000 x 6,000 x 12,000 mm, weight approx.: 180,000 kg
used
Description: Press line consiting of, 6x MĂśLLER Hydraulic double column deep draw presses Type: (2x) ZE 630 Year of manufacture: 1962 and 1963 Capacity: 630 ton Ram weight: 19.000 kg Max. punch weight: 47.000 kg Max. tool dimensions: 2460 x 1900 mm Min. installation height: 710 mm Max. installation height (only for cutting tool): 1060 mm Machine dimensions: approx. 4000 x , 2000 x 5500 mm Machine weight: approx. 150.000 kg , Type: (4x) ZE 400 Year of manufacture: (2x)1971, 1965 and 1960 Capacity: 400 ton Ram weight: (3x) 12.000 kg and (1x) 8.200 kg Max. punch weight: 16.400 kg Max. tool dimensions: (3x) 2460 x 1400 mm and (1x) 2040 x 1300 mm Min. installation height: 610 mm Max. installation height (only for cutting tool): 910 mm Machine dimensions: approx. 4000 x , 2000 x 5000 mm Machine weight: approx. 120.000 kg 7x Pick- and Place robots Manufacturer: ABB Type: IRB ...
New in: 2017
used
Description: Maximum pressing force (downwards): 15,000 kN Maximum pressing force (upwards): 500 kN Maximum carriage travel: 1400 mm Working hours: 4500h approx Master cylinders: 2 (570/545 mm) Maximum distance between carriage and table: 2200 mm Minimum distance between carriage and table: 800 mm Front distance between columns: 5250 mm Lateral distance between columns: 1500 mm Lateral distance between piston rods: 1150 mm Dimensions of the mobile table (left / right x front / rear): 5000 x 2500 mm Dimensions of moving table (left / right x front / rear): 5000 x 2500 mm Approach speed of the carriage: 350 mm/s Adjustable working speed: 0 to 24 mm/s Maximum working speed at 1500t: 11.7 mm/s Return speed: 250 mm/s General characteristics of the lower slide Ram strength: 5000 kN Slide travel: 300 mm Slide travel area: 4350 x 1850 mm Pin spacing: 150x150 mm Number of ram pin slots: 308 piec ...
used
1.500 € Description: Enerpac workshop press 50 t double-acting with electric hydraulic pump Foot switch activated Year of construction unknownMax. pressing force: 50 to, Approx. Onsite Dimension. (l x w x h): 110 x 450 x 1,950 mm, weight approx.: 850 kg ... more information
New in: 1980
used
used
New in: 2001
used
Pressing force: 72kN, stroke: 12-100mm, machine needs overhauling. ... more information
New in: 1966
used
New in: 2016
used
There are two identical benchtop presses available, stroke: 100mm, max. press force: 25kN, weight: 123kg. ... more information
New in: 1980
used
New in: 1991
used
Max. pressing force: 2000kN, max. working length: 2600mm, max. stroke: 265mm, throat depth: 300mm, weight: 16t. ... more information
New in: 1993
used
Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. ... more information
New in: 1965
used
Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t. ... more information
used
Pressing force: 2500kN, throat depth: 450mm, ram stroke: 40-160mm, weight: 16,2t, including documentation. ... more information
used
Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. ... more information
New in: 1980
used
Wire diameter: 16mm, number of stations: 5, length: 6700mm, width: 3800mm, height: 3050mm, including sound-proof cabin, straightener, chain hoist, sorting trough, dosing machine, oil mist separator and additional accessories. ... more information
used
Pressing force: 1400t, press-out length flat: 1500-12,000mm, recipient 1: max block diameter: 185mm, max block length: 350mm, recipient 2: max block diameter: 150mm, max block length: 580mm, max. operating pressure: 240bar, connected load: 535kW, retrofit 2001 includes power increase to 1000t, new piston rods ground and chrome-plated. Operating pressure: 240bar, connected load: 535kW, year of construction is original 1915, retrofit 2001 includes power increase from 1000t to 1400t, new piston rods in ground and chrome-plated design, installation of a new shear, completely new mould slide, hydraulics: renewal of the control, regulating and safety valves. Completely new pipework, completely new control cabinet, control panel, length measuring system and control system (Siemens S7-300), with documentation, an on-site inspection is possible.
New in: 2008
used
Pressing force: 3000kN, stroke: 130mm, table dimensions: 725x1160mm, motor power: 30kW, weight: 13t. ... more information