subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Load capacity: 100kg, weight 1760kg, layer use: 1-layer. EURO standard baskets can be used: Length/width/height: 600mm/400mm/288mm. Spray cleaning and flood cleaning possible. ... more information
Vacuum chamber volume: 0.62m³, weight: 2800kg, cooling water requirement: 700l/h. On-site inspection is possible. ... more information
Expected particle size: 0.5-50µm, dust consistency: dry and free-flowing. Operating temperature: ... more information
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible. ... more information
There are 2 identical Mörz PM soundproof cabins available. ... more information
Diameter: 250mm, wire thicknesses: 0.20mm/0.27mm/0.35mm/0.38mm/0.50, grit size (RASALON): 80/120/180/320/500. Brush roller: Brush speed: 1500/3000rpm. Dimensions X/Y/Z: 700mm/440mm/1200mm. Including workpiece support and prism guide. Documentation available. ... more information
Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.
Axes X/Y/Z: 350mm/250mm/350mm, workpiece dimensions X/Y/Z: 650mm/580mm/250mm, max. workpiece weight: 100kg. Inner dimensions of work bowl: 860mm/620mm/360mm, rotation: 60rpm, capacity: 415l, filter quality: 3μm-5μm. Dimensions X/Y/Z: 2689mm/1855mm/2593mm, empty weight: approx. 3200kg, filling weight: approx. 4200kg, control: AgieVision. Documentation available.
Rotor weight: max. 50kg, rotor diameter: max. 720mm, rotor length: max. 600mm, spindle: S100, motor speed: 2500 rpm. Weight: 850kg. ... more information
There are 10 identical SIHN ring piece rotary transfer machines available. Parts: Rotary indexing table, clamping device, clamping cylinder, vertical and horizontal drilling units, feed unit, vibration conveyor, hydraulic unit, housing, control system, various pneumatic assemblies. Power: 25kW-38kW, working pressure: approx. 6bar, weight: approx. 4500kg-6500kg. The rotary transfer machines are only sold as a package. Individual machines cannot be sold separately.
CONTROLS conventional PRESS FORCES total force (nominal): 60 toSLIDE (MECHAN. PRESS) slide adjustment: 70 mm stroke min.: 11 mm stroke max.: 60 mm variable speed: yes stroke rate (min.): 60 /min stroke rate (max.): 240 /minATTACHMENTS (PRESSES) strip feeder: yes
CONTROLS CNC controls YASKAWA DX200 4-axis palletizing robot as good as new, never in usePayload 500 kgUp to 1200 cycles/hourVertical reach 3024 mmHorizontal reach 3159 mmWeight 2300 kg 2 units available ... more information
ELECTRICAL SPECIFICATIONS total power consumption: 57 kW mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 4900 mm space requirements -front/back-: 2600 mm total height: 2600 mm total weight approx.: 2600 kgWashing medium: solvent-freebasket/rack size 790 x 590 x 600 mm cabin dimensions 1200 x 1200 x 1200 mmuseable volume 800 x 780 x 900 mmnet weight of batch   ; 200 kgAttachments:Dosing unit DOSANTEC A763-168Mbuffer tank 100 ltrWaste water tank 75 ltrrotating spraying cross from toprotating spraying cross from bottomDrying device (circulating air) wi ...
CONTROLS CNC controls AGIE WORKING RANGE -WIRE CUTTING- worpiece length max.: 750 mm worpiece width (max): 550 mm X-axis travel: 350 mm Y-axis travel: 250 mm U-axis travel: 70 mm V-axis travel: 70 mmTABLE workpiece load (max): 450 kgWIRE SYSTEM wire diameter (min): 0.2 mm wire diameter (max): 0.33 mmELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 2000 mm space requirements -front/back-: 1700 mm total height: 2200 mm total weight approx.: 2500 kg
CONTROLS PLC SIEMENS S5 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 38 mm wall thickness min.: 2 mm wall thickness max.: 4 mm length min.: 52 mm lenght max.: 200 mmSystem consists of:+ BÜHLMANN (system construction), YoM 1997+ BACHMANN ABB robot cell, YoM 2014+ BROTHER TC-S2DN-0 CNC machining center, YoM 2012
FEEDSTOCK TUBE length min.: 4000 mm lenght max.: 12000 mmMACHINE CHARACTERISTICS SWAGING force: 2000 kN stroke rate (max.): 740 /minPRODUCT (PROFILE, TUBE) external diameter min.: 30 mm external diameter max.: 127 mm wall thickness min.: 1.5 mm wall thickness max.: 11 mm length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlinghammering length: 180-300 mmhammering time: approx. 15 secondstotal hammering time: approx. 21 seconds (incl. loading and unloading)production capacity: approx. 170 pcs/hinclusive:+ pipe adjustage GFU ZS-2000 kN+ various GFU hammer jaws (30-110 mm)
FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 105.5 mm wall thickness min.: 0.8 mmPRESS FORCES total force (nominal): 300 to ... more information
CONTROLS PLC SIEMENS S7-1200 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 170 mmMACHINE CHARACTERISTICS SWAGING force: 1000 kN stroke rate (max.): 560 /minPRODUCT (PROFILE, TUBE) length min.: 4000 mm lenght max.: 12000 mmcomplete line including hammer and tube handlingmin. end diameter: 12 mmmax. end diameter: 110 mmlength of the conical tool part: 190 mm (for hammering)work feed speed: 0-100 mm/secrapid speed: 200 mm/secproduction output: approx. 260 pcs/h
CHARACTERISTICS HEAT TREATMENT EQUIPMENT heating method: electric temperature min.: 420 °C temperature max.: 930 °C throughput, capacity: 6000 kg/hThroughput per Hour+ 420-680 degrees Celsius: 6000kg+ 830-930 degrees Celsius: 3200kg- Red tube storage racks next to the furnace not included
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 1500 mm space requirements -front/back-: 1250 mm total height: 2100 mm- Polishing cell C710 (1970 houres in production)Equipment of the machine:Collaborative UR3 e-series robot with intuitive HMIAutomatic compensation for tool wearPolishing station Crevoisier C5100 (drive polishing tools)Spindle for holding standard Crevoisier colletsIntegrated suction with 14m/sRenishaw measuring probe for position detectionPalletizing for approx. 40 STK 2 Pal.Two polishing paste dispensers with a capacity of three liters each