subcategories
(3rd category level)
Manufacturer:
(Category: 109)
Wire diameter range: 4.0 - 10.0 mmsection sections: up to 4,000 mm feed speed: 90 / 120 mtr./min; ready for use ... more information
wire diameter range: 8,0 - 12,0 mmcutting length: up to. 5.500 mmwire feeding speed: 70 - 100 mtr./min.Straightener with hyperbolic rolls; good ... more information
Wire diameter range: 1.5 - 7.0 mm section sections: max. 2,000 mm feed speed: 5 - 120 mter./min.machine has been completely repainted; very good ... more information
wire diameter range: 1,0 - 4,0 mmcutting length: up to 2.000 mmwire feeding speed: 5 - 90 mtr./min; ready for operation ... more information
wire diameter range: 1,0 - 5,0 mmringdiameter: 80 - 600 (1.000 mm)wire feeding length: max. 10.000 mmoutput: 12 - 30 rings/minwelding capacity: 10 kVA; ready for operation ... more information
Equipment:5 Sledge units1 Two-point excenter press 70 kNworking range:Drahstaerke range: max. 3.0 mmwidth: max. 40 mm feed load: max. 170 mmpower: max. 250 rpm; ready to use ... more information
wire diameter range: a) up to 800 N/mm² = 6,0 - 15,0 mm b) up to 1200 N/mm² = 6,0 - 12,0 mm c) up to 1400 N/mm² = 6,0 - 11,0 mm cutting length: max. 14.000 mm wire feeding speed: 22 - 120 mtr./min. machine is been partly reconditioned and new painted; very good ... more information
Wire rod: 0.1 - 1.3 mm section area: 5 - 70 mm power: max. 400 rpm complete with cooling unit and driven wire reel; good ... more information
wire diameter range: 2,0 - 6,0 mmcutting length: up to 500 mmsuitable for Round- Profil- and Flatwire; ready for operation ... more information
wire diameter: 3,0 - 5,5 mmnail length: 15 - 80 mmoutput: 150/300 St./min.-for steel pins-; very good ... more information
wire diameter range: 1,8 - 3,4 mm nail length: 13 - 80 mm output: 550 nails/min. partly refitted and new painted; very good ... more information
Bushes or rollers with strip width: 3,0 - 23 mmStrip thickness: 0,7 - 1,5 mmInternal bush diameter: 3,5 - 7,5 mmOutput: 270/min.; very good -like new- ... more information
Machine is been partly reconditioned in 2014wire diameter range: 4,0 - 10,0 mmcutting length: up to 3.000 mmwire feeding speed: 90/130 mtr./min.; ready for operation ... more information
wire diameter range: 1,0 - 5,0 mmring diameter range: 100 - 600 mmwire feeding length: max. 2.000 mmoutput: 10 - 120 pcs./min.; very good ... more information
working width: 2.000 mmnumber of line wires: max. 16distance of cross wires: 6\", 12\", 18\", 24\" od. 36\"distance of length wires: 1/2\" to 1/2\"wire diam. length wire: 2,5 - 3,25 mmwire diam. edge wire: max. 4,0 mmwire diam. cross wire: max. 3,25 mmwire diam. knot wire: max. 3,25 mm; ready for operation
wire diameter range: 2,5 - 6,0 mmwire feeding length: unlimitedwire feeding speed: up to 36 mtr./minangle of bending: 0 - 340°; ready for operation ... more information
wire diameter range: 1,2 - 2,8mmmesh width: 20 - 70 mmworking width: max. 2.000 mmoutput: max. 170 m²/Stunde; good ... more information
Loading capacity: max. 300 Kg.Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mmCoil width: max. 180 mm; good ... more information
1 duck air tank (approx. 1500 ltr.), built: approx. 2014 1 compressed air refrigerant dryer (Boge); Year: approx. 2014 1 oil and water separator ... more information
REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard) ...