subcategories
(3rd category level)
Manufacturer:
(Category: 110)
BWF fixators for alignment and fastening / zum Ausrichten und Befestigen Model : SV Number : 5001 Base dimensions : 330 x 225 mm Height : 400 mm Bolt : M 36 x 1,5 x SW 30 Weight : 28 kg Quantity : 11 pieces This lot is loaded for free ... more information
drum diameter:400 mmrevolutions per minute:980 U/mintotal power requirement:2,2 kWLanner batch wringer ME41-2for deoiling of metal chips-turnkey delivery and easiest handling-very long service life, operation free of vibrations-compact and easy to maintain, i.e. low maintenance costs and quick return of investment-standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control-including control cabinet laterally placed, i.e. not in swivel range of crane-drum volume 35 Liter/max. 50 kg-rotation speed max. 980 min-1-power 2,2 kWPainting:RAL 5012 light blue (batch wringer, crane support)RAL 1003 signal yellow (traverse)RAL 7035 light grey (control cabinet)In each case silk gloss. Changes after consultation.Also included in the scope of delivery:-Crane support with swivel arm: mounted on the side of the centrifuge ...
DREHTAINER Fundamentstütze – container support Number : 5411 – 12 – 362 – 9705 Own weight : 18 kg Capacity per piece : 15000 kg Minimum height : 265 mm Maximum height : 415 mm Base size : 300 x 300 mm Quantity : 12 pieces Including pallet with edges This lot is loaded for free ... more information
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3900 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12500 kgTechnical description :- Travel from middle is = 1650mm left / 1650mm right- Stroke upper carriage from middle = 1610mm left / 930mm right- Thrust capacity = 130 kN - Thrust speed carraige = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carriage = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
TOOL CART:. - capacity:35000 kgDIMENSIONS / WEIGHTS:. - space requirements length:3450 mm - space requirements width:3100 mm - total height:420 mm - height above floor level:440 mm - total weight approx.:12000 kgTechnical description :- Travel from middle is = 1425mm left / 1425mm right- Stroke upper carriage from middle = 925mm left / 925mm right- Thrust capacity = 130 kN - Thrust speed carraige = 20/2 m/min- Travelling speed undercarriage = 24/2 m/min- Travelling speed uppercarraige = 12/2 m/min
liter capacity:21 l/minPressure of coolant:50 barrated current:20 AClean water tank capacity:300 ltotal power requirement:16 kWweight of the machine ca.:200 Kgdimensions of the machine ca.:1,2 x 0,8 x 1,4 mWe are importers for FRASCARA high pressure coolant systemsFrascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min.We can provide up to 3 pressure levels controlled by M-Functions.Oil operated systems are available also.Areas of application:Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machinesFunction:The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 ba ...
length:250 mmwidth:200 mmheight:400 mmBase plate dim:400 x 400 mm ... more information
Wingspan1 - 10 mm Internal thread1/2" - 20 UNF Outer - Ø42.7 mm Length (closed) 61 mm Weight 0.2 kg. This lot has a suggested retail price of €120.96 ... more information
length:1200 mmwidth:120 mmheight:1260 mm ... more information
We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95.The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box.Also some tool pots are damaged.Can be repaired or used as spare parts ... more information
Tool holder type:Collet/ Spannzange ER 40 Tool holder shaft type:ISO 15488-40-A Shank diameter:60 mmratio:1:1 RPM of rotary tools:6000 1/minCoolant trough compatible up to:80 (ext.) bar90° rotary tool holder BMT 60 like new and never used.External coolant up to 80 bar. ... more information
Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mmratio:1:1 RPM of rotary tools:6000 1/minCoolant trough compatible up to:80 (ext.) barStraight rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mmratio:1:1 RPM of rotary tools:6000 1/minCoolant trough compatible up to:80 (ext.) bar90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mmRPM of rotary tools:6000 1/minratio:1:1 Coolant trough compatible up to:80 (ext.) barStraight rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mmratio:1:1 RPM of rotary tools:6000 1/minCoolant trough compatible up to:80 (ext.) bar90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar.
Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mmlength:75 mm90° angle rotary tool holder BMT 40There are two units available. Both are like new and never used.External coolant up to 80 bar. ... more information
Max. 3600 watts. 230V - 6A. IP44: Splash proof. This cable is mainly used in factories, workshops and/or construction sites for the connection of movable electrical equipment, machines, motors, tools and other implements. The outer sheath is resistant to high mechanical loads, weathering, abrasion, oil and ozone.