Manufacturer:
(Category: 503)
- Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - Built in 2013 - only 12,500 hours - with second cutting table - Incl. power pack and control cabinet - Shredder Metso M&J 4000-12 - 2 x 12 knives - 2 x 132 kW - year of manufacture 2013 - only 12 500 hours - with second cutting table - with power pack
SHREDDER KOMPTECH TERMINATOR 5000 E incl. control cabinet ... more information
Rotor shears with feed hopper and base frame Demonstration machine with only 10 operating hours 2 x 15 kW Cutting unit 600 x 850 mm Rotor shear with hopper and feet demo machine with only 10 working hours 2 x 15kW Cutting chamber 600 x 850 mm ... more information
Specifications Cutting width: 3.8×48 mm Productivity: approx. 40 sheets (A4, 70g/m²) Cutting speed:- Year of construction: 1989 Safety level: P3 Power supply: 400 V / 2.2 kW ... more information
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available ... more information
Doppstadt DW 3060K Biopower Type F - Year of construction 11/2017 - Hours 4839 - Engine MTU 490 hp - AD BLUE - Track chassis - Weight 30,000 kg -Remote control - Humidification system - Tail conveyor 7m - Overbelt magnet Machine is overhauled and immediately available ... more information
Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available ... more information
Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available
Shredder HSM Powerline FA 500.3, for large quantities Specifications Manufacturer: HSM Type: Powerline FA 500.3 Year of construction: 2013 Drive power: 7.5 kW Input width: 500 mm Cutting width: 3.9 x 40 mm Security level (DIN 66399 / ISO / IEC 21964): E-3 / F1 / O-3 / P-4 / T-4 Cutting capacity in 80g/m² sheet: 180-200 Hopper volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg
Specifications Cutting width: 3.8x50 mm Power supply: 400 V Year of construction: 1991 Price: on request the security level: P2 ... more information
Specifications Cutting width: 7.5x40-80 mm Year of construction: 1999 Productivity: approx. 300 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 250 mm/s the safety step: 2+1 wg DIN 32757 P-1,O-1,T-2 wg. DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Pressing force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity: - Bale weight: - Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual
Specifications Cutting width: 7.5 x 40-80mm the safety level DIN 66399: P-3 O-2 T-3 E-2 Productivity: 2500 kg/h Year of construction: 2012 ... more information
Specifications Cutting width: 3.8×48 mm Year of construction: 1993 Productivity: approx. 40 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: - the safety step: P3 Power supply: 400 V / 2.2 kW We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
Specifications Industrial shredders IDEAL 4104 Shredder Cutting width: 6 mm Power supply: 400 V/ 4 kW the safety step P2 DIN66399-1 Year of construction: 1993 Productivity: ok. 70 sheets (DIN A4, 70g/m²) Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!