shredders used for sale

Large Four Shaft Shredder with Two Cutting Shafts and Two Feed Shafts. Until now, the shredder has been used as a pre-shredder for the recycling of old cables. Due to the hydraulic tamper, the shredder can also be used for bulky materials. Changing the screens is hydraulically assisted and therefore easy to do. On request, the shredder can also be supplied with the articulated conveyor belt shown here. The conveyor belt is equipped with a magnet in the upper pulley for iron separation.

New. Unused. Adjustable. Dismantled. Inner diameter passage: 155 mm Total height: 190 cm  ... more information

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

Rotor shears with feed hopper and base frame Demonstration machine with only 10 operating hours 2 x 15 kW Cutting unit 600 x 850 mm Rotor shear with hopper and feet demo machine with only 10 working hours 2 x 15kW Cutting chamber 600 x 850 mm  ... more information

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

Two Shaft Universal Shredder by H&S Scheuten GmbH in Very Good Working Order. It was overhauled and complete refurbished in 2018 by the manufacturing company H&S Scheuten GmbH. Unit Specifications: - Power 30kw - 35pcs 20mm thickness Knives with 4 hooks in good condition - Cutting Chamber 700mm X 300mm Perfect for light shredable material with a very high output. Could be used for: biomass, food recycling, packaging recycling, delumping of brittle material and many other applications.

Untha RS40 Shredder Year: 12/2019 Technical data RS40 Rated capacity 30/37/44 kW Cutter clearance 750/1000 x 700mm Number of shafts 4 pcs Speed of the main shafts 24 rpm Speed of the secondary shafts 32 rpm Ø perforated screen 15-40 mm Weight 3300/3600kg  ... more information

WEIMA WLK 18 SJ SUPER JUMBO SINGLE SHAFT SHREDDER, Totally refurbished in 2020 with replacement of electric circuits + motor + rotor + board .., 219 worked hours after refurbIshing, loading hopper 1.800 x 1.880 mm., hopper capacity approx 5,4 m3, rotor width 1.800 mm, rotor diameter 482 mm, 100 rpm, 75 kw drive, weight : about 12.000 kg, installed power : 75

Small shredder for a wide range of tasks such as old cables, plastics wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). The machine was overhauled by the manufacturer ISVE in September 2020 and supplemented with an electronics for networking into a cable recycling line. A rotor cover for the optimized processing of old cables has also been added. Currently, the shredder has a 16 mm hole sieve but other hole diameters can also be added. With the 16 mm hole sieve, the shredder reaches about 250 kg/hour when processing mixing cables.

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material. ... more information

n°1 Cutting chamber: 300x330mm. n°2 hexagonal shafts. n°33 counter-rotating blades, blade Thickness 10 mm or n°10 counter-rotating blades, blade thickness 30 mm n°1 reducer with electric motor 7, 5kW, 400V, 50Hz, Shafts rotation speed 18/20 rpm. Total weight of the Shredder 700 Kg.

Three-shaft shredder / pipe shredder - designed for the crushing of thick-walled pipes Manufacturer: NEUE HERBOLD New machine Drives: 2 x 30 kw - 1 x 37 kW  ... more information

32 solid single flails  ... more information

Small but very robust and powerful shredder for a wide range of tasks such as old cables, plastics, wood, etc. With hydraulic, electronically controlled feed. Drive 18.5 + 2.2 kW (rotor + feed). Rotor shaft with connections for connecting a cooling unit (e.g. when used for old NYM cables. The machine is and little used from our demo machine inventory. The machine is offered with a one-year used machine warranty.

total power requirement: 3,0 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,6 mSingle shaft shredder cutting system chip shredderPerformance values: Motor cutting unit 3.0 KWTemperature range 15-40 degrees CelsiusVoltage 400VPower consumption 3.0 KWLength x width x height with flat gear 1.50 mm x 575 mm x 315 mmMounted on a mobile base frameincluding mobile/tiltable bucket cartincluding documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Danieli Henschel CIV 600-8L DI Xpert, 700t cutting force option:, Brand: Danieli Henschel, Model: DI Xpert CIV 600-8L, Technical data:, Clearance under blade 600 mm, Chipping width 800 mm, Blade width 840 mm, Packer force 100 t, Length 5952 mm, Width of open box 2400 mm, Width of closed box 750 mm, Closed box depth 565 mm, Cylinder force on each side 2 x 130 t, Production < 60 t/h, power, Max. power John Deer Diesel 480 hp, Tank capacity 800 l, Year of construction: 2022, Operating hours 2600 h, Warranty: none, Excluded: Hydraulic oil Foundations, Electrical connections, Cranes for handling welding equipment, and welders, The machine is immediately available., fire: Daniel Henschel, model: DI Xpert CIV 600-8L, Year of construction: 2022, Warranty: none, Excluded: Hydraulic oil foundations

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fo ...

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t  ... more information

ID3254 Franzoi TAZ280 year/Year of construction 2022 approx. 50 hours/hours 16.5 t Wood shredder, 2-shaft shredder Wood Shredder, 2 Shaft Shredder  ... more information