- (4)
- Band Saw Automatics (113)
- Band saw sharpening machines (4)
- Band Saws (178)
- Circular Cold Saws (92)
- Circular Sawing Automatics (35)
- Circular Saws (103)
- Crosscut Saws (5)
- Double Miter Saws (41)
- Double mitre bandsaws (5)
- Fully Automatic Circular Saws (4)
- Hacksaw Automatics (5)
- Hacksaws (51)
- High Performance Bandsaws For Metal (3)
- Horizontal Band Sawing Machines (1)
- Horizontal Bandsaws (49)
- Hydraulic Circular Cold Saws (5)
- Hydraulic Metal Miter Band Sawing Machines (1)
- Longitudinal Circular Cold Sawing Machines (1)
- Metal Miter Band Sawing Machines (2)
- Metal Processing Circular Saws (25)
- Miter Bandsaws (10)
- Miter Saws (4)
- Mitre cutting bandsaws (3)
- Oscillating stroke jigsaws (2)
- Other Sawing Machines (5)
- Pipe Cutters (4)
- Sawing Centres (1)
- Sawing Machines (5)
- Semi-automatic Band Saws (7)
- Semi-Automatic Bandsaws (1)
- Table circular saws (2)
- Underfloor Saws (3)
- Vertical Bandsaws (44)
- more
- ABB (1)
- ABCD MACHINERY (1)
- ADAL (1)
- ADDISON (1)
- ADICE (1)
- ADIGE (3)
- ALMA (1)
- ALUMINIUMKREISSäGE (1)
- Amada (10)
- ANTON (1)
- ARMZ (1)
- Arntz (2)
- ATECH (2)
- AUGUST MÖSSNER (1)
- AYEL-TECH (5)
- BAHCO (1)
- BANDSAEGE (1)
- BAUER (4)
- Behringer (46)
- Behringer Eisele (2)
- BEKA-MAK (47)
- BEKAMAK (1)
- BENATO (1)
- Berg + Schmid (63)
- BERG EN SMID (1)
- BERG SCHMID - HALBAUTOMAT (1)
- BERG-SCHMID (2)
- Bernardo (8)
- BEWO (6)
- BF TEC (1)
- BIANCO (24)
- BIGSTON (1)
- BIMAX (1)
- BMSY (2)
- BOMAR (8)
- BOMAR - (1)
- BOMAR WEIRA (1)
- Bosch (4)
- BSM (1)
- BTM (1)
- BTM - VOLLAUTOMAT (1)
- BUIDWELL (1)
- Bulmak (2)
- Carat (2)
- CARIF (1)
- CARTER CNC (1)
- CEDIMA (1)
- CHANNEL LETTER SAW (1)
- CIEMME-EMMEGI (1)
- CONTIMAC (1)
- Cosen (3)
- CUTTING (1)
- CY (1)
- Daiss + Partner (2)
- Danobat (5)
- DDR (1)
- DeWalt (4)
- DoAll (3)
- DOELL (1)
- DORNSEIF (1)
- EBG-TECH #4950 (1)
- ECKERT (1)
- Eisele (46)
- EISELE - Halbautomat (5)
- EISELE EMMEGI (1)
- EISELE THOMAS (1)
- EISMO (1)
- ELU (3)
- Elumatec (33)
- Emmegi (8)
- EPPLE (1)
- EVERISING (3)
- EVOLUTION (1)
- EXCEL (1)
- EYLTOOL (1)
- FABRIS (2)
- Fein (3)
- FELDER (1)
- FEMI (1)
- FERINA (1)
- Flamme (3)
- FLOTT (3)
- FMB (3)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FOM (1)
- FORTE (14)
- FORTEMAT (2)
- FORTUNA (1)
- FRAMAG (1)
- FRIGGI (15)
- FRITZ GROSS (1)
- GACO (1)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (4)
- GEORG FISCHER/ ORBITALUM (1)
- GERD WOLFF (18)
- GRAULE (6)
- ... more
Manufacturer:
(Category: 105)
New in: 2002
used
Semi-automatic Double-sided miter Capacity 240 x 280 mm ... more information
New in: 1999
used
New in: 2013
used
Axle:XZ (2-axle) Ø 350 Dimensions: 1800x4400x2000mm ... more information
New in: 2016
used
Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates
New in: 1998
used
5.700 € Description: CNC programming of 50 programmes Cutting speed 20 - 150 m/min Clamping pressure reduction Belt deviation control Bundle tensioning device cutting diameter: 420 mm, band dimensions: 5920x41x1,3 mm, cutting range 90 degrees: flat: 420 mm, cutting range 90 degrees: square: 420x420 mm, total power requirement: 11 kW, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,900 x 2,400 mm
New in: 2005
used
cutting diameter: 320 mmsaw band length: 3990 x 27 x 0,9 mmtable height: 900 mmrotary disc high: 320 mmtable to piston: 320 mmhourly output: 320 x 320 mmcomponent weight: links + rechts 280 mmcomponent weight: links + rechts 280 mmcapacity 30 degrees: round: links + rechts 180 mm: links + rechts 180 mmtotal power requirement: 4 kWweight of the machine ca.: 1300 kgdimensions of the machine ca.: 2200 x 1200 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Blade diameter 350 mm Cutting range: cross-section 90° = 430 mm / cutting height at 90° = 135 mm / mitre cut 45° = 300 mm Suction nozzle diameter 100 mm Motor 2 kW, 400 V Weight approx. 100 kg ... more information
New in: 2004
used
Carbide saw blade 550 mm Three-phase motor 4 HP, 400 V Turning speed of the saw blade 3070 rpm Indirect transmission motor-carbide saw blade Set of integral protective cover for the cutting area Adjustable exit speed of the saw blade Saw blade shaft diameter 32 mm 2 vertical pneum. Tensioning devices with safety check valves and 1 horizontal pneum. Clamping device with swinging movement Operating pressure 7 atm Air consumption 32 NI at 6 atm per duty cycle Micro-drop lubrication of the cut with pure oil Prepared for chip and smoke removal Positioning of the head for all angle settings from 90° to +/- 20° Numeric display with 5 characters incl. aut. Length measuring device = measuring track 5.7 m and roller track 4.6 m Weight of the machine approx. 830 kg
New in: 2006
used
Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 2100 kg -with: - ELUMATEC E 355 control system - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - 2 x suction system fixed + moving along - Separate control cabinet ...
New in: 1986
used
Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Roller conveyor feed 4000 mm - Discharge – roller conveyor with dimension stop 5000 mm
New in: 1987
used
Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.
used
used
9.250 € -Flywheels Ø 1,000 mm, -Cutting capacity rectangular 800 x 850 mm, -Cutting capacity Ø 800 mm, -Belt dimension 54 x 1.6 mm, -max. belt length 9,470 mm, -Carriage stroke 500 mm. Attention! This machine has already been dismantled and is in storage. ... more information
used
used
used
used
used
used
10 € Lifting arm aborted with damage ... more information
used
100 € adjustable 50°-0-50°; equipped with pneumatic power supply; 2 button control ... more information