presses used for sale

 ... more information

nominal force:160 tstroke:140 mmno. of strokes:85 /mindistance between columns:400 mmdistance table/ram, max. stroke up, adjustment up:500 mmtable surface area:400 x 450 mmtable height over floor:800 mmAllowed max. force:230 tram surface:400 x 320 mmspindle diameter:125 mmpower requirement:7,35 kWweight:5,0 tdimensions (WxDxH):1,7 x 1,2 x 2,9 m

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics ... more information

pressure: 250 tdistance between columns: 1650 mmstroke: 900 mmtable-size: 1600 x 1000 mmtotal power requirement: 65 kWweight of the machine ca.: 31 tdimensions of the machine ca.: 3 x 2 x 5 mCushion in table.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg  ... more information

Pressure:630 tdistance between columns:1600 mmstroke:fix 250 mmno. of strokes:20 /mindistance table/ram, max. stroke up, adjustment up:900 mmtable surface area:1550 x 1200 mmtable height over floor:800 mmside window:620 mmram surface:1360 x 1200 mmram adjustment:160 mmheight over floor:5,9 mheight beneath floor:0,6 mpower requirement:32,0 kWweight:59,0 tdimensions (WxDxH):3,0 x 2,2 x 6,5 mclutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch

pressure: 63 tthroat: 260 mmstroke: 8-100 mmram - range of adjustment: 63 mmno. of strokes: 115 Hub/min: 316 mmtable surface area: 630x490 mmram surface: 315x260 mmhole in the table: Ø 140 mmtotal power requirement: 4 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 360 tstroke: max 60 mmtable surface area: 525x430 mmno. of strokes: 60 Hub/min: 40 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

pressure: 40 tdistance between columns: 450 mmstroke: 20-50 mmram - range of adjustment: 60 mmtable surface area: 370x400 mmram surface: 250x370 mmhole in the table: 120x280 mmtable height: 850 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: BxTxH 1600x1300x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional  ... more information

Bottom table can be swivelled on both sides Upper table swivel: 90° Injection unit Clamping force: 18,000 kp Under table LxW: 1.200x9000 mm Top table LxW: 1.00x900 mm Overall dimensions LxWxH: 2.500x1.900x4.000 mm Price 4.500 EUR fixed price VAT excluding VAT Deployment FOB Location Baden-Württemberg, Germany Renting This

pressure:063 tthroat:250 mmstroke:8 - 100 mmno. of strokes:56 / 84 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:710 x 500 mmhole in the table:320 mmtable height over floor:800 mmpassage to the back:320 mmram surface:450 x 280 mmram adjustment:63 mmweight:4,1 tdimensions (W x D x H):1,35 x 2,0 x 2,6 moverload protection in ram:mechanical

pressure: 10 tthroat: 235 mmstroke: ca. 400 mmstroke speed - idle stroke downwards: 4,5 m/minstroke speed - idle stroke upwards: 10 m/mindayligth: ca. 500/600 mmtable-size: ca. 450 x 400 mmram hole: 32 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 0,95 x 0,45 x 2,1 mCondition: ready for operation: Condition: geometric overhauled: Video available on our website.: Electric 380 Volt: With elect. two-hand control through: separate console: Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel.Work only with safe tools or solid shields!The stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the soft ...

pressure: 060 tthroat: 280 mmstroke: 140 mmtable-size: 750 x 520 mmStrole of rum/minute: 100 ram adjustable: 55 mmstroke adjustable from - to: 10 - 140 mmmould space: 340 mmhole in the table: 230 x 175 mmtable adjustable: 220 mmtool hole in ram: 40 mmtotal power requirement: 2,95 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 1,5 x 1,2 x 2,4 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Foot switch: adjustable table: Single column eccentric press with rotary wedge coupling, adjustable table,stroke + ram and flywheel drive. Approved only for safe tools and solid onesshields!Last test according to the test report July 2022: Everything is OK.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 400 tthroat: 1140 mmstroke: 600 mmtable surface area: 2000x1000 mmPlate: 4000x1000x300 mmram head dimension: 2000x1040 mmCylinder: 300 mmDaylight: 650 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 3,9x4x4,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 370 mmstroke: 10 - 140 mmno. of strokes: 58 Hub/minram adjustment: 80 mmtable surface area: 900 x 670 mmram surface: 410 x 430 mmtable height: 760 mmtool hole in ram: 65 mmtoolpiece height max.: 450 mmweight of the machine ca.: 6 tpneumatic clutch-brake combinationMechanical fracture plate in the ramTwo-hand operationFoot controlUVV until 03/2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tthroat: 550 mmstroke: 10 - 140 mmtable surface area: 1180 x 980 mmno. of strokes: 40 Hub/mindayligth: 500 mmram surface: 1040 x 800 mmram adjustment: 70 - 150 mmtool shank hole (depth x diameter): 435 x 55 mmrequired power: 15 kWweight of the machine ca.: 12 tdimensions of the machine ca.: 3 x 1,7 x 3 m- with additional brake- slide weight compensation- motorized slide adjustment- central grease lubrication (manual)- table mounting plate- safe for manual inlay workThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...

pressure:160 tdistance between columns:2050/1900 mmstroke:15 - 170 mmno. of strokes:15 - 40 /mindistance table/ram, max. stroke up, adjustment up:690 mmtable surface area:1600 x 800 mmside window:800 mmram surface:1620 x 700 mmram adjustment:140 mmpower requirement:15,0 kWweight:24,0 tDimensions (WxDxH):3,3 x 2,3 x 5,3 mheight over floor:4,8 mheight beneath floor:0,5 mclutch:pneumatic ram adjustment:motoric ram counterbalance:pneumatic