saws used for sale

The machine is in good technical condition, after agreement possibility of inspection. Size: 1494x1137x1243 mm Dimension of saw band: 2910x27(25)x0,90mm Weight: 358 kg Supply voltage: 3x400 V TN-C-S Motor power: 1.0/1.5 kW Total power input: 1.7 kW Degree of protection: IP 54 Maximum overcurrent protection: 16 A Rated speed: 2800/1420 m/min Cutting speed: 40 / 80 m/min

Max. saw length: 6,000 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via E 355 Digital angle indicators on both units for pan and tilt Travelling roller conveyor Material Pad Minimum Quantity Spraying Device Machine is loaded freely  ... more information

cutting diameter: 260 mmserial number: 109967 volt: 380 Vfrequency: 50 Hzweight of the machine ca.: 500 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... more information

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting range - square -: 120 x 120 mmcutting range - flat -: 300 x 40 mmcapacity 45 degrees: round: 130 mmcapacity 45 degrees: square: 110 x 110 mmcapacity 45 degrees: flat: 245 x 40 mmmitter cutting - all-position: 90 °cutting speed: 13 / 25 m/mincontrol: minipos 807 total power requirement: 4,3 kWweight of the machine ca.: 850 kgdimensions of machine L x W x H: 1,20 x 1,20 x 1,82 mAccessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3505 x 32 x 0,95 mmcutting width: mmControl: total power requirement: 8 kVAweight of the machine ca.: 1,2 tdimensions of the machine ca.: 1937 x 1850 x 1570 mmNC-controlled band saw machine for series cuts with differentlengths and quantities for all materials.Technical data:Cutting capacityCutting diameter 250 mmBelt speed 24 - 90 m/min. - steplessSaw band dimensions 3505 x 32 x 0.95 mmBelt drive 3.7 kWTable height 550 mmEquipment:Chip conveyorCoolant deviceRunwayOperation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Türkei : 58300 €: 1171.83 €: Doppelsäulenführung : 6000 x 41 x 1,3 mm: 20 - 100 m/min: 560 mm: 560 mm: 600 x 560 mm: 810 mm: 0.12 kW: 2.2 kW: 5.5 kW: 3250 mm: 2200 mm: 2350 mm: 4500 kgHydromechanical band tensionContinuously variable bandspeed (inverter)Linear guideFeed vice with servo drive with 700 mm stroke or 9.999 mm for multi-strokeControl panel with touchscreen (50 cutting lengths / 30 programs)Planetary gearboxSaw pressure adjustmentBand deflection sensorCoolant deviceChip brushOptical height adjustmentOPTIONEN: Hydraulicupper clamping € 2.300,- Micro cooling unit € 890,- Roller table3 m € 4.440,- Laser cutting line € 560,-The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. Onsite Dimension. (l x w x h): 1,400 x 1,200 x 1,900 mm, weight approx.: 1,000 kg ... more information

Description: Including roller conveyor  , Attention: without visible materialApprox. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,200 mm, weight approx.: 3,000 kg ... more information

Description: Machine number: 18401 Table dimensions: 800 x 750 mm Cutting height: approx. 100 mm Incl. grindstone and a device for welding saw bands Also 2 integrated drawersweight approx.: 700 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 900 x 2,000 mm ... more information

Description: Machine number: 82416 Cutting length: approx. 400 mmweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,000 mm ... more information

elumatec Double Mitre Saw DG104 Year of construction: 1995 Control: E255 Saw blade diameter 420 mm Saw blade bore 30 mm Cutting length 6000 mm Tilt range 45 + 90° Inward swivel range 90 - 22.5° Saw blade speed 2800 rpm. Smallest cutting length 335 mm Power 2 x 4000 W  ... more information

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request

Specifications: Sawing area 90° round: 300 mm 90° flat: 300 x 300 mm Feed rate: 10 mm Multi-feed: 6000 mm Max. sawing speed: 0 - 115 1/min Dimensions (WxDxH), approx.: 2580 x 2300 x 1850 mm Equipment: -Conveyor - Coolant device - Emergency stop push button  ... more information

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

Article code: 19-03-035 Manufacturer: Kasto Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1600x800x1300mm Weight: approx. 500kg Saw blade dimensions: approx. 450mm Cutting diameter: approx. 200mm Accessories  Cutting pressure adjustable  Coolant device  9 pieces of saw blades Other accessories on request Price and other technical data on request

Description: Serial number: 3603M03400 Nominal speed: 5000 rpm Nominal power: 1400 W Table dimensions: approx. 640 x 600 mmweight approx.: 20 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 500 mm ... more information

Description: Fabrication number: 57900023 Operating voltage: 3 x 380 V Frequency: 50 Hz Connection: 3 kW Cutting length: approx. 450 mm Incl. roller trestles Roller width: approx. 320 mm Incl. large lot of suitable saw bladesApprox. Onsite Dimension. (l x w x h): 3,000 x 2,300 x 1,300 mm, weight approx.: 500 kg

Description: Table dimensions: approx. 675 x 500 mm Speed range: 90 - 3000 rpm Mobileweight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 750 x 1,100 mm ... more information

Description: Fabrication number: 243 Table dimensions: approx. 560 x 535 mm Stop: 0 - 400 mm Work table can be swiveledweight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,100 mm ... more information