- Band Saw Automatics (110)
- Band saw sharpening machines (4)
- Band Saws (181)
- Circular Cold Saws (93)
- Circular Sawing Automatics (31)
- Circular Saws (85)
- Crosscut Saws (5)
- Double Miter Saws (41)
- Double mitre bandsaws (5)
- Fully Automatic Bandsaws (1)
- Fully Automatic Circular Saws (4)
- Hacksaw Automatics (5)
- Hacksaws (47)
- High Performance Bandsaws For Metal (3)
- Horizontal Bandsaws (35)
- Hydraulic Circular Cold Saws (4)
- Hydraulic Metal Miter Band Sawing Machines (1)
- Manually Operated Bandsaws (1)
- Metal Processing Circular Saws (22)
- Miter Bandsaws (10)
- Miter Saws (5)
- Mitre cutting bandsaws (3)
- Oscillating stroke jigsaws (2)
- Other Sawing Machines (5)
- Pipe Cutters (5)
- Sawing Centres (1)
- Sawing Machines (5)
- Semi-automatic Band Saws (7)
- Semi-Automatic Bandsaws (1)
- Table circular saws (2)
- Underfloor Saws (3)
- Vertical Bandsaws (45)
- more
- ABB (1)
- ABCD MACHINERY (1)
- ADAL (1)
- ADICE (1)
- ADIGE (2)
- AEG (1)
- ALUMINIUMKREISSäGE (1)
- Amada (9)
- ANTON (1)
- Arntz (6)
- ATECH (2)
- AYEL-TECH (5)
- BAHCO (1)
- BANDSAEGE (1)
- BAUER (4)
- BAUER-MASCHINENBAU (1)
- Behringer (41)
- BEHRINGER - HALBAUTOMAT (1)
- Behringer Eisele (2)
- BEKA-MAK (47)
- BEKAMAK (1)
- BENATO (1)
- Berg + Schmid (65)
- BERG SCHMID - HALBAUTOMAT (1)
- BERG-SCHMID (2)
- Bernardo (8)
- BEWO (4)
- BIANCO (24)
- BIGSTON (1)
- BIMAX (1)
- BMSY (2)
- BOMAR (10)
- BOMAR - (1)
- BOMAR WEIRA (1)
- Bosch (3)
- BSM (1)
- BTM (1)
- BTM - VOLLAUTOMAT (1)
- Bulmak (2)
- CARIF (1)
- CARTER CNC (1)
- CEDIMA (1)
- CHANNEL LETTER SAW (1)
- CIEMME-EMMEGI (1)
- Cosen (3)
- Daiss + Partner (2)
- DAIß (1)
- Danobat (5)
- DDR (1)
- DELTA (1)
- DoAll (5)
- DOELL (1)
- DORNSEIF (1)
- EBG-TECH #4950 (1)
- ECKERT (1)
- Eisele (41)
- EISELE - Halbautomat (5)
- EISELE EMMEGI (1)
- EISELE THOMAS (1)
- ELEKTRA BECKUM (3)
- ELU (3)
- Elumatec (31)
- Emmegi (6)
- ERCOLE (1)
- EVERISING (2)
- EYLTOOL (1)
- FABRIS (1)
- FABRIS ITALY (1)
- Fein (3)
- FELDER (1)
- FEMI (1)
- FERINA (1)
- Flamme (3)
- FLOTT (3)
- FMB (2)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FORTE (10)
- FORTEMAT (2)
- FORTUNA (1)
- FRAMAG (1)
- FRIGGI (8)
- GEISS + PARTNER (1)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (5)
- GEORG FISCHER/ ORBITALUM (1)
- GERD WOLFF (18)
- GRAULE (5)
- GROB (2)
- HABUSCH (5)
- HAFFNER (1)
- HBA (1)
- HBM (4)
- HBS (1)
- HEBOE (1)
- HELLER (2)
- HESKA (9)
- HESSE by BEKA-MAK (31)
- ... more
Manufacturer:
(Category: 105)
used
Saw blade diameter: 400mm, length: 1080mm, width: 900mm, height: 1760mm, weight: 925kg. ... more information
New in: 1997
used
Rotational speed: 1800/3600/min, an inspection is possible. ... more information
New in: 1991
used
Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm. ... more information
New in: 2001
used
Saw blade diameter: 550mm, max. cutting length: 4000mm, inclination of the cutting head: up to 30° for angled cuts. Dimensions X/Y/Z: approx. 9000mm/6000mm/1300mm, weight: approx. 1600kg. ... more information
New in: 2006
used
Compressed air supply: 6bar, motor power: 1.9kW, weight: 370kg. ... more information
New in: 1994
used
Cutting dimensions: 500x320mm, connected load: 2.2kW, length: 3550mm, width: 2000mm, height: 2110mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible. ... more information
New in: 1997
used
Cutting dimensions: 400x260mm, connected load: 2.2kW, length: 2500mm, width: 1000mm, height: 1500mm, weight: 1.8t, including set-up tools and documentation, on-site inspection is possible. ... more information
New in: 2016
used
Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.
New in: 2004
used
Cutting diameter: 260 mm, saw band length: 3660 x 27 x 0.9 mm, cutting width: 260 mm. Cutting speed: 15 - 105 m/min. Length: 1.8 m, width: 2 m. Machine weight: approx. 1.2 t. The control unit is defective - normal sawing is possible but no automatic material transport or automatic cutting to length. An on-site inspection is possible.
New in: 2015
used
Segment saw blade: 400mm x 4mm x 50mm. Working range: round material 90°/45°: 130mm, square material 90°/45°: 120mm/110mm, flat material 90°/45°: 305mm x 20mm/245mm x 30mm, U-profile upright 90°/45°: 120mm x 55mm, U-profile horizontal 90°/45°: 240mm x 85mm/180mm x 70mm. Cutting speed with saw blade 400mm in m/min: 13/26 or 10/20 or 15/30. Feed rate: 0-3300mm/min. Dimensions X/Y/Z: 800mm/1070mm/1780mm, weight: approx. 850kg. Available from June, 2024. Documentation available. On-site inspection is possible.
New in: 1991
used
Saw blade diameter: max. 250mm, motor speed: 2800rpm, saw shaft speed: 3800rpm, saw blade bore: 20mm. Max. Cutting height 90°/45°: 82/55mm, table size: 710 x 900mm, angle adjustment: 0° to 45°. ... more information
New in: 2001
used
Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg. ... more information
New in: 1983
used
Cutting range round: 340mm, cutting range square: 340mm/380mm, feed length: 600mm, multiple feed: 1800mm, belt speed: 20 - 130m/min. Cutting speed infinitely variable. Material support height: 600mm (roller conveyor height). Documentation available. On-site inspection is possible. ... more information
New in: 1996
used
Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible. ... more information
New in: 2006
used
Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible. ... more information
New in: 1990
used
Saw blade length/width: 8400mm/50mm. Documentation available. On-site inspection is possible. ... more information
New in: 1996
used
Length: 2200mm, width: 1200mm, height: 535mm, weight: 385kg. ... more information
New in: 1996
used
New in: 2012
used
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 105.5 mm wall thickness min.: 0.8 mm length min.: 3000 mm lenght max.: 12500 mmPRODUCT (PROFILE, TUBE) length min.: 7 mm lenght max.: 2000 mmELECTRICAL SPECIFICATIONS mains power supply: 100 kVA mains voltage: 400 V mains frequency: 50 HzInternal ID: Fix 17 / Rattunde 2Rattunde ACS 105/2/BM+CFMcurve+SCB+SRTH+CC+Pi+ CFMcurve end machining on both sides with automatic adjustmentTools are not included in the scope of delivery.
New in: 2013
used
CONTROLS PLC SIEMENS S7 FEEDSTOCK TUBE external diameter min.: 10 mm external diameter max.: 105 mm length min.: 3000 mm lenght max.: 12500 mmELECTRICAL SPECIFICATIONS mains power supply: 200 kVA mains voltage: 400 V mains frequency: 50 HzInternl ID: Fix 18 / Rattunde 3Rattunde ACS 105/2/BM+CFMcurve+WDM+SCB+SRTH+CC+Pi+ CFMcurve end machining on both sides with automatic adjustment- machine is being sold WITHOUT washing systemTools are not included in the scope of delivery.