- Band Saw Automatics (111)
- Band saw sharpening machines (4)
- Band Saws (179)
- Circular Cold Saws (93)
- Circular Sawing Automatics (31)
- Circular Saws (104)
- Crosscut Saws (5)
- Double Miter Saws (42)
- Double mitre bandsaws (6)
- Fully Automatic Bandsaws (1)
- Fully Automatic Circular Saws (4)
- Hacksaw Automatics (5)
- Hacksaws (51)
- High Performance Bandsaws For Metal (3)
- Horizontal Bandsaws (47)
- Hydraulic Circular Cold Saws (4)
- Hydraulic Metal Miter Band Sawing Machines (1)
- Manually Operated Bandsaws (1)
- Metal Processing Circular Saws (22)
- Miter Bandsaws (10)
- Miter Saws (6)
- Mitre cutting bandsaws (3)
- Oscillating stroke jigsaws (2)
- Other Sawing Machines (5)
- Pipe Cutters (5)
- Sawing Centres (1)
- Sawing Machines (5)
- Semi-automatic Band Saws (7)
- Semi-Automatic Bandsaws (2)
- Table circular saws (2)
- Underfloor Saws (3)
- Vertical Bandsaws (45)
- more
- ABB (1)
- ABCD MACHINERY (1)
- ADAL (1)
- ADICE (1)
- ADIGE (2)
- AEG (1)
- ALUMINIUMKREISSäGE (1)
- Amada (10)
- ANTON (1)
- Arntz (6)
- ATECH (2)
- AYEL-TECH (6)
- BAHCO (1)
- BANDSAEGE (1)
- BAUER (4)
- BAUER-MASCHINENBAU (1)
- Behringer (42)
- BEHRINGER - HALBAUTOMAT (1)
- Behringer Eisele (2)
- BEKA-MAK (47)
- BEKAMAK (1)
- BENATO (1)
- Berg + Schmid (66)
- BERG SCHMID - HALBAUTOMAT (1)
- BERG-SCHMID (2)
- Bernardo (8)
- BEWO (2)
- BIANCO (25)
- BIGSTON (1)
- BIMAX (1)
- BMSY (2)
- BOMAR (9)
- BOMAR - (1)
- BOMAR WEIRA (1)
- Bosch (3)
- BSM (2)
- BTM (1)
- BTM - VOLLAUTOMAT (1)
- Bulmak (2)
- CARIF (1)
- CARTER CNC (1)
- CEDIMA (1)
- CHANNEL LETTER SAW (1)
- CIEMME-EMMEGI (1)
- Cosen (3)
- Daiss + Partner (2)
- DAIß (1)
- Danobat (4)
- DDR (1)
- DELTA (1)
- DoAll (5)
- DOELL (1)
- DORNSEIF (1)
- EBG-TECH #4950 (1)
- ECKERT (1)
- Eisele (43)
- EISELE - Halbautomat (5)
- EISELE EMMEGI (1)
- EISELE THOMAS (1)
- ELEKTRA BECKUM (3)
- ELU (3)
- Elumatec (30)
- Emmegi (6)
- ERCOLE (1)
- EVERISING (2)
- EYLTOOL (1)
- FABRIS (1)
- FABRIS ITALY (1)
- Fein (3)
- FELDER (1)
- FEMI (1)
- FERINA (1)
- Flamme (3)
- FLOTT (3)
- FMB (2)
- FMB - JUPITER -FULL AUTO (1)
- FMB - ORION - AUTOFEED (1)
- FORTE (10)
- FORTEMAT (2)
- FORTUNA (1)
- FRAMAG (1)
- FRIGGI (8)
- GEISS + PARTNER (1)
- GEORG FICHER (1)
- GEORG FISCHER (13)
- GEORG FISCHER (ORBITALUM) (1)
- Georg Fischer / Orbitalum (5)
- GEORG FISCHER/ ORBITALUM (1)
- GERD WOLFF (18)
- GRAULE (5)
- GROB (2)
- HABUSCH (5)
- HAFFNER (1)
- HBA (1)
- HBM (5)
- HBS (1)
- HEBOE (1)
- HELLER (2)
- HESKA (9)
- HESSE by BEKA-MAK (31)
- ... more
Manufacturer:
(Category: 105)
New in: 2001
used
Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg. ... more information
used
Cutting diameter: 290mm, cutting width 320mm, saw blade length: 3100mm, saw blade dimensions X/Y/Z: 3100mm/27mm/0.9mm, miter cuts min./max.: -60°/+60°, cutting speed: 20m/min - 100m/min. Weight: approx. 570kg, dimensions X/Y/Z: approx. 1800mm/950mm/2100mm. An on-site inspection is possible. ... more information
New in: 1996
used
Saw blade diameter: approx. 300mm, control: APS Elektronic. Dimensions X/Y/Z: 800mm/1200mm/1600mm. Including 2 roller conveyors (sheet steel), dimensions X/Z: 4000mm/1000mm. Defective but not irreparable. On-site inspection is possible. ... more information
New in: 2006
used
Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible. ... more information
New in: 2001
used
Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes. ... more information
New in: 1991
used
Working height: approx. 925mm, cutting range: At 90°: Square: 90mm/90mm, Flat: 200mm/90mm, At 45°: Flat: 140mm/90mm. Saw blade diameter: 250mm/275mm/300mm/315mm/325mm/350mm. ... more information
New in: 2001
used
Saw blade diameter: 550mm, max. cutting length: 4000mm, inclination of the cutting head: up to 30° for angled cuts. Dimensions X/Y/Z: approx. 9000mm/6000mm/1300mm, weight: approx. 1600kg. ... more information
New in: 1995
used
Cutting capacity round: 360mm, cutting capacity square: 360mm/360mm, minimum remnant length: 80mm, saw blade dimensions: 5334mm/34mm/1.1mm, cutting speed: 20-130m/min, material feed: single stroke up to 600mm, work table height: 700mm. Dimensions X/Y/Z: 2600mm/2400mm/2000mm, weight: approx. 2500kg. Flywheel defective. Including chip conveyor Knoll 150 K-1. On-site inspection is possible.
used
used
50 € The lot is located on the 1st floor, accessible by stairs. There is no elevator. A forklift truck is available on site. ... more information
used
New in: 1992
used
roll diameter:420 mmthroat:400 mmworkpiece height:325 mmtable surface area:615 x 615 mmtable swivelabel +/-:10/45 °table - inclinable:+/- 20 °cutting speed:20 - 2500 m/mintotal power requirement:2 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:0,95 x 0,65 x 1,83 m ... more information
used
used
used
used
used
used
used
used