presses used for sale

PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 10 SLIDE  stroke rate (max.): 110 /min10 stations + 1 auxiliary5 ton per stationDistance between stations: 54 mm  (2-1/8")STROKE OF CAMS (STANDARD)#1 25-35 mm  (1- 1-3/8")#2 to #10  25-41 mm, (1 - 1-5/8")Speed: 110 SPM

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   frame design: C-frame, single sided   number of suspensions: 1 PRESS FORCES  total force (nominal): 200 toPRESS TABLE  table surface (left-right): 1400 mm  table surface (front-back): 800 mmSLIDE  table surface (left-right): 1000 mm  table surface (front-back): 600 mmSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  autom. Slide adjustment: yes   stroke min.: 20 mm  stroke max.: 200 mm  stroke rate (max.): 45 /min  hydraulic overload protection: yes DIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 510 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 VDIMENSIONS / WEIGHTS  ...

PRESS FORCES  total force (nominal): 72 toA new electrical control system and a mechanical and lubrication rebuild are required.One used PLATARG model 611 transfer press, high speed type.Full follow cams.Number of stations: 12Number of rams: 11 + 1 slaveCapacity on any one ram: 6 tonsSpeed range: 30 – 120 SPMMax shell height: 20 mmTransfer slideMachine awaiting refurbishment

PRESS DESIGN  drive system: eccentric / crank   openings in uprights: yes   feedstock transport direction: right to left PRESS FORCES  total force (nominal): 315 to  nominal work capacity: 45 kNmPRESS TABLE  table surface (left-right): 2250 mm  table surface (front-back): 1100 mm  thickness of bolster plate: 150 mm  height above floor level: 1000 mmSLIDE  slide force: 315 to  table surface (left-right): 2250 mm  table surface (front-back): 880 mm  stroke: 210 mm  stroke rate (max.): 80 /minSLIDE (MECHAN. PRESS)  slide adjustment: 120 mm  stroke rate (min.): 25 /min  stroke rate (max.): 80 /min  main drive power: 60 kWSLIDE EJECTOR / CUSHION  working principle: pneumatical   nominal force: 1. ...

CONTROLS  PLC PRESS DESIGN  drive system: eccentric / crank   number of slide actions: 12 PRESS FORCES  total force (nominal): 36 toSLIDE  slide force: 3 to  stroke: 38 mmSLIDE (MECHAN. PRESS)  variable speed: yes   main drive power: 4 kWOVERALL SPECIFICATIONS (COIL LINES)  sheet width max.: 50 mm  feedstock transport direction: front-back STRIP-FEEDER  feeder type: roll feeder   sheet width max.: 50 mm  pilot release system: no   band lubrication system: optional TRANSFER SYSTEM  number of tool stations: 13   distance between tools, stroke X fixed: 63.5 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2400 mm   ...

CONTROLS  PC controller BECKHOFF C 6140 PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE  total force (nominal): 410 to  stroke: 200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 8 mm/s  working velocity max.: 80 mm/s  return velocity max.: 150 mm/sCOUNTER RAM  nominal force: 120 to  stroke: 40 mmV-RING  nominal force: 250 to  stroke: 40 mmTOOL DIMENSIONS  lower table (left-right): 820 mm  lower table (front-back): 1250 mm  upper table (left-right): 820 mm  upper table (front-back): 1250 mm  shut height max.: 410 mmSTRIP-FEEDER  feeder t ...

CONTROLS  PLC SIEMENS S5 95U PRESS DESIGN  drive system: hydraulic   openings in uprights: yes PRESS FORCES  total force (nominal): 350 toPRESS TABLE  table surface (left-right): 1600 mm  table surface (front-back): 1400 mmSLIDE  stroke: 1200 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 250 mm/s  working velocity min.: 14 mm/s  working velocity max.: 50 mm/sTOOL ASSEMBLY DIMENSIONS  distance table - slide max.: 1250 mm  distance between columns (H-frame): 1650 mm  passline opening (free passage in side columns): 630 mmDIMENSIONS / WEIGHTS  height above floor level: 4300 mm  height under floor level: 1000 mm  total weight approx.: 24000 kgATTACHMENTS (PRESSES)  European CE standards: yes

SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (min.): 28 /min  stroke rate (max.): 72 /minV-RING  nominal force: 25 toCOUNTER RAM  nominal force: 12 toTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mm  shut height max.: 255 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 180 mm  sheet thickness max.: 5 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 1700 mm  space requirements -front/back-: 2420 mm  total height: 2420 mm  total weight approx.: 6000 kgATTACHMENTS -FINEBLANKING PRESS-  decoiler: optional   leveller unit: optional

CONTROLS  PLC SIEMENS S5 PRESS DESIGN  drive system: eccentric / crank   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   number of slide actions: 1   table cushion: yes   quick die change system: yes   feedstock transport direction: left to right PRESS FORCES  total force (nominal): 400 to  nominal work capacity: 32 kNmPRESS TABLE  table surface (left-right): 2600 mm  table surface (front-back): 990 mm  thickness of bolster plate: 200 mm  height above floor level: 800 mm  opening in bed (left-right): 2250 mm  opening in bed (front-back): 280 mmSLIDE  slide force: 400 to  table surface (left-right): 2600 mm  table surface (front-back): 990 mm & ...

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 350 mm  table surface (front-back): 330 mmSLIDE (MECHAN. PRESS)  stroke rate (min.): 250 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3800 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 30 toSLIDE (MECHAN. PRESS)  stroke rate (min.): 200 /min  stroke rate (max.): 1200 /minDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgATTACHMENTS (PRESSES)  decoiler: yes   strip feeder: yes   feeder type: roll feeder

CONTROLS  conventional PRESS FORCES  total force (nominal): 20 toSLIDE (MECHAN. PRESS)  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 38 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 1800 /minSTRIP-FEEDER  feeder type: roll feeder ELECTRICAL SPECIFICATIONS  total power consumption: 20 kWDIMENSIONS / WEIGHTS  total weight approx.: 3600 kgCoil Reel&Straightener KOHLER (option)

CONTROLS  electronic controls PRESS DESIGN  frame design: 4 column PRESS FORCES  total force (nominal): 400 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 800 mmSLIDE  slide force: 400 to  table surface (left-right): 1200 mm  table surface (front-back): 800 mm  stroke: 500 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 290 mm/s  working velocity min.: 25 mm/s  return velocity max.: 290 mm/s  return force: 35 toTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 1100 mmELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 2255 mm  space requirements -front/back-: 1660 mm  t ...

PRESS DESIGN  number of slide actions: 12 PRESS FORCES  total force (nominal): 36 toSLIDE  stroke: 44 mm  stroke rate (max.): 160 /minThis machine will have the following installed/added to ito new lubricationo new electrical installationo new protectionso CE conformityNumber of station 13 (12+1).Capacity on any one station 3 tons.Max stroke 44 mm.Standard stroke cams.Max blank diameter 47 mm.Operating speed range 40 to 160 SPM max.Machine weight approx. 3200 kg.

CONTROLS  PLC BECKHOFF SLIDE  total force (nominal): 80 to  stroke: 50 mm  stroke rate (min.): 28 /min  stroke rate (max.): 70 /minV-RING  nominal force: 25 toCOUNTER RAM  nominal force: 22 toTOOL DIMENSIONS  lower table (left-right): 420 mm  lower table (front-back): 420 mm  upper table (left-right): 420 mm  upper table (front-back): 420 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 200 mm  sheet thickness max.: 5 mm  feeding step min.: 0 mm  feeding step max.: 999 mm  pilot release system: yes   measuring wheel: optional ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzATTACHMENTS -FINEBLANKING PRESS-  waste cutter: yes Example of an overhaule ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 30 toPRESS TABLE  table surface (left-right): 480 mm  table surface (front-back): 428 mmSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke adjustment: yes   stroke min.: 8 mm  stroke max.: 40 mm  variable speed: yes   stroke rate (min.): 100 /min  stroke rate (max.): 600 /minTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 220 mmSTRIP-FEEDER  feeder type: roll feeder   feeding step min.: 20 mm  feeding step max.: 100 mmELECTRICAL SPECIFICATIONS  total power consumption: 4.5 kW  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1200 mm &nbs ...

CONTROLS  PLC SIEMENS S5 SLIDE  total force (nominal): 160 to  stroke: 60 mmCOUNTER RAM  nominal force: 80 toV-RING  nominal force: 80 toTOOL DIMENSIONS  lower table (left-right): 560 mm  lower table (front-back): 600 mm  upper table (left-right): 560 mm  upper table (front-back): 600 mm  shut height max.: 335 mm  ram adjustment: 125 mm  distance between columns (H-frame): 630 mm  passline opening (free passage in side columns): 270 mmCROP SHEAR  cutting force: 150 kNDIMENSIONS / WEIGHTS  total weight approx.: 11000 kgATTACHMENTS -FINEBLANKING PRESS-  autom. tool clamping device: yes   decoiler: optional   waste cutter: yes   slug separator: optional very well maintained machine !2016 Overhaul by Fei ...

CONTROLS  PLC OMRON PRESS DESIGN  drive system: knuckle-joint   frame design: H-frame, monoblock   feedstock transport direction: left to right SLIDE  total force (nominal): 160 to  stroke: 60 mm  stroke rate (max.): 72 /minCOUNTER RAM  nominal force: 40 to  stroke: 14 mmV-RING  nominal force: 50 to  stroke: 13 mmTOOL DIMENSIONS  shut height max.: 277 mm  ram adjustment: 80 mmSTRIP-FEEDER  feeder type: roll feeder   sheet width max.: 210 mm  sheet thickness max.: 6 mm  nominal force: 6 kN  measuring wheel: no   band lubrication system: optional   band support rolls: yes DIMENSIONS / WEIGHTS  space requirements -left/right-: 1940 mm  space requirements -front/back-: 1780 m ...

PRESS DESIGN  drive system: hydraulic   frame design: H-frame, monoblock   openings in uprights: yes   number of suspensions: 2   table cushion: yes PRESS FORCES  total force (nominal): 650 toPRESS TABLE  table surface (left-right): 3000 mm  table surface (front-back): 1800 mmSLIDE  slide force: 630 to  table surface (left-right): 3000 mm  table surface (front-back): 1800 mm  stroke: 1000 mmSLIDE (HYDR. PRESS)  approximation velocity max.: 200 mm/s  working velocity min.: 7 mm/s  working velocity max.: 15 mm/s  return velocity max.: 120 mm/s  return force: 65 toDIE CUSHION (TABLE CUSHION)  cushion force: 250 to  stroke: 400 mm  cushion plate surface (left-right): 2500 mm  cushion  ...

PRESS DESIGN  drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES  total force (nominal): 12 toSLIDE  stroke: 200 mmELECTRICAL SPECIFICATIONS  mains voltage: 380 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 1000 kg