- (19)
- Assembly Presses (1)
- Balling Presses (3)
- Bending And Straightening Presses (6)
- Bending Presses (132)
- Blanking Presses (3)
- Bolt Presses (1)
- CNC Bending Presses (8)
- Coining Presses (1)
- Crank Presses (11)
- Deburring Presses (6)
- Die Forging Hammer (4)
- Die Spotting Presses (18)
- Double Column Eccentric Presses (8)
- Double Column Presses (8)
- Double Column Pulling Presses (4)
- Eccentric Presses (92)
- Edge-Merging Presses (9)
- Fine Presses (15)
- Fly Presses (18)
- Fly Presses With Electro Mechanical Drive (6)
- Four Point Crank Presses (1)
- Friction Spindle Presses (3)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (3)
- H-Frame Punching And Forming Machines (1)
- High Speed Presses (17)
- Horizontal Forging Machines (4)
- Horizontal Presses (8)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (10)
- Hydraulic Double Column Presses (11)
- Hydraulic Fine Blanking Presses (6)
- Hydraulic Forging Presses (2)
- Hydraulic H-Frame Presses (7)
- Hydraulic Open Gap Bench Presses (2)
- Hydraulic Open Gap Drawing Presses (4)
- Hydraulic Open Gap Presses (23)
- Hydraulic Presses (91)
- Knuckle Joint Presses ( 1 - 3 Columns) (4)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (9)
- Manually Operated Presses (4)
- Mechanical Presses (19)
- Multi-Stage Presses For Solid Forming (1)
- Oil Hydraulic Presses (1)
- Open Gap Eccentric Presses (106)
- Open Gap Toggle Lever Presses (10)
- Other Crank Presses (2)
- Other Eccentric Presses (1)
- Other Hydraulic Presses (6)
- Other Mechanical Presses (4)
- Pneumatic Bench-Type Presses (4)
- Pneumatic Presses (14)
- Press Brakes (4)
- Presses For Special Applica (1)
- Pressure Joining Units (1)
- Punching Machines (21)
- Punching Presses (19)
- Ring Rolling Mills (1)
- Single Column Presses (11)
- Straight-Bending Presses (20)
- Toggle Lever Presses (9)
- Transfer Presses (2 - 4 Columns) (14)
- Wire Nail Presses (1)
- Workshop Presses (61)
- more
- A+B FASTECH (3)
- A. U. SÖHNE (1)
- A.COLLY W.UNSELD (1)
- AB (1)
- ABM (1)
- ACME (2)
- ADIRA (1)
- AGEO (6)
- AIDA (2)
- AMADA (13)
- AMBOLD (11)
- AP+T Lagan (2)
- ARISA (1)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (4)
- AYEL-TECH (15)
- BAIER (1)
- BAKKER (1)
- BALCONI (1)
- Barnaul (2)
- BAYKAL (3)
- BBT (1)
- BBT PRESSEN (1)
- BELTECH (1)
- BELTECH GMBH (1)
- BEMA (1)
- Berg + Schmid (10)
- Bernardo (8)
- BERNINGHAUS (1)
- Berrenberg (4)
- BETEMA BERLIN (1)
- BETZ (1)
- BEUTLER (5)
- BEYELER (5)
- BLECKEN (1)
- BLEMA ZEULENRODA (1)
- BLÄTTNER/EITEL (1)
- BMW (1)
- BOLDRINI (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BRAUN (1)
- BRET (1)
- BRUDERER (10)
- BRUNNHUBER (1)
- BRÃœCK (1)
- BUCHER-GUYER (1)
- Burger (2)
- Bussmann (3)
- BYSTRONIC (6)
- BöLLHOFF (1)
- Calende (11)
- CALLAHAN (1)
- CAME PANASONIC (1)
- Caronno (3)
- CEPSA (1)
- CHIN FONG (3)
- CHU LING MACHINE (1)
- CIDAN (1)
- CLEARING (1)
- CoastOne (4)
- COLLY (4)
- COLOMBO AGOSTINO (1)
- COMESSA (1)
- CRIMPONE (1)
- DAKO (1)
- DARLEY (4)
- DE GRAAF (1)
- DENER (1)
- DERATECH (1)
- DIEBELS (1)
- Dieffenbacher (3)
- DIESSE PRESSE (2)
- DIOSGYöRER (1)
- dirinler (3)
- DONEWELL (1)
- DORST (15)
- DUNKES (22)
- DURMA (6)
- DURMAZLAR (1)
- EBU (23)
- ECAI (1)
- Eckold (25)
- EDEL (1)
- EDELHOFF (7)
- EHT (22)
- EIGEN (1)
- Eigenbau (2)
- EISENWERK HENSEL (1)
- EITEL (9)
- ELBARON (1)
- ELUMATEC (6)
- EM HART, TUCKER (1)
- EMANUEL (1)
- Enerpac (2)
- ... more
Manufacturer:
(Category: 106)
New in: 1965
used
Printing capacity max. 25 t, table 600 x 600 mm, stroke max. 350 mm ... more information
New in: 1965
used
New in: 1965
used
Power of parallel/offset crankshaft: 30t/2x20t, stroke: 50mm, clamping surface: 230mm/460mm, face of tappets: 2x 30mm/110mm, average of clamping journals: 38mm. Max./min. Opening front dead center: 240mm/180mm, ejection distance: 24mm. Max./min. Band width: 80(100)mm/10(5)mm, max. feed: 120mm. Running speed: 60-180rpm, drive pulley diameter: 180mm, gear reduction: 1:4, documentation available.
New in: 1965
used
Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t. ... more information
New in: 1966
used
throat: ca. 300 mmstroke: ca. 200 mmpressure capacity max.: 35 tdie cushion hydr. pressure/stroke: 15 ttotal power requirement: 5,6 kWweight of the machine ca.: ca 2,5 tdimensions of the machine ca.: 1 x 0,9 x H 2,4 m mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1966
used
Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t
New in: 1966
used
New in: 1966
used
Pressing force: 15t, stroke adjustment: 0-60mm, stroke speed: 120/min. ... more information
New in: 1966
used
pressure:035 tthroat:225 mmstroke:8 - 100 mmno. of strokes:110 /mindistance table/ram, max. stroke up, adjustment up:400 mmtable surface area:580 x 460 mmhole in the table:250 x 150 mmtable height over floor:700 mmtable adjustable:230 mmram surface:355 x 120 mmram adjustment:70 mmpower requirement:2,2 kWweight:1,5 tdimensions (WxDxH):1,0 x 1,5 x 2,05 mclutch:rolling key overload protection in ram:mechanical
New in: 1966
used
pressure:063 tthroat:450 mmstroke:8 - 100 mmno. of strokes:65 /mindistance table/ram, max. stroke up, adjustment up:415 mmtable surface area:720 x 800 mmhole in the table:280/250 mmtable height over floor:800 mmpassage to the back:290 mmram surface:450 x 280 mmram adjustment:63 mmpower requirement:7,5 kWweight:4,7 tdimensions (WxDxH):1,3 x 2,0 x 2,65 mclutch:pneumatisch overload protection in ram:mechanisch
New in: 1966
used
pressure: 100 tthroat: 410 mmstroke: 8-112 mmno. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mmtable surface area: 950 x 700 mmram surface: 700x450 mmhole in the table: Ø 280 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 7,0 tdimensions of the machine ca.: 1400x2200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1966
used
Eccentric press Manufacturer KRS (Kurt Rompel Solingen) Type EPV50, YOC 66, Printing capacity 50 t, Plunger stroke 80 mm, Weight approx. 2.500kg UVV Test Book Machine fully operational ... more information
New in: 1966
used
pressure:200 tdistance between columns:1100 mmstroke:600 mmdistance table/ram, max. stroke up, adjustment up:1100 mmtable surface area:1000 x 1000 mmpressure of drawing cushion in table:63 tstroke of drawing cushion in table:250 mmdie cushion area:800 x 750 mmtable height over floor:800 mmram surface:1000 x 1000 mmSpeed down:400 mm/sspeed up:250 mm/sworking speed:22 - 56 mm/spower requirement:45,0 kWweight:24,0 tdimensions (WxDxH):2,4 x 1,5 x 5,9 mGerman Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic
New in: 1966
used
600 € Description: Capacity: 10 tonnes Collection on: 29/04/2024 or 06/05/2024 , ,Collection times by arrangement , IMPORTANT: Collection times may vary if separate collection times are explicitly stated in ,in the item description ,Approx. Onsite Dimension. (l x w x h): 600 x 1,000 x 2,300 mm, weight approx.: 1,000 kg
New in: 1967
used
pressure: 800 tdistance between columns: 600 mmstroke: 65 mmram - range of adjustment: 50 mmtable surface area: 590x650 mmram surface: 590x450 mmno. of strokes: 45 Hub/mintotal power requirement: 22 kWweight of the machine ca.: 18 tdimensions of the machine ca.: BxTxH 1700x2600x3100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1967
used
pressure: 63 tthroat: 280 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 620x500 mmram surface: 310x260 mmhole in the table: Ø 250 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1200x1900x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1967
used
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000
New in: 1967
used
pressure: 63 tthroat: 330 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 850x600 mmram surface: 550x360 mmhole in the table: Ø 240 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 1300x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
New in: 1967
used
Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: BBT Presses, single column eccentric press type ER 25 with safety cage -Press guard: Nilson -Clutch: pneumatic -Pressure capacity: 25 tons -Stroke rate: 50/100 strokes/min -Stroke: adjustable 12 - 80 mm -Table size: 520 x 360 mm -Projection: 190 mm -Punching fixture: Ø 30 mm -Insert height: 310 mm -Central lubrication -Dimensions: 1180/800/H1820 mm -Weight: 1418 kg
New in: 1967
used
Capacity: 800 tons Stroke of slider: 500 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Press dimensions, mm 3800 x 2800 x 6900 Weight: 57 tons