saws used for sale

Machine Type: Metal Circular Saw Machine Manufacturer: EISELE Model No.: VMS-II-300 Year of Make: 1989 Condition: very good Offer type: used machine Specifications: Cutting range: Ø 100 mm Blade diameter: 300 mm Drive type: el./mech. Drive: 1.4 / 1.9 kW Remark: coolant device, minimum lubrication, Material overlay, Material stop with measuring bar, Replacement saw blade, 4 machine feet Substructure Weight: 200 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Machine Type: Semi-Automatic Metal Circular Saw Machine Manufacturer: KALTENBACH Model: KKS 370 H Year of Make: 1975 Condition: good Offer type: used machine Specifications: Blade diameter: 370 mm Cutting range: max. cutting diameter 120 mm Drive type: el./hydr. Drive: 3.7 / 4.5 kW Remark: coolant device, 4 m roller conveyor with measuring bar and material stop, 1 m roller conveyor plus 3 support blocks, 2 spare saw blades, 2 spare clamping blocks Weight: 800 kg The machine is in good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

ELUMATEC SA 142/36 automatic circular sawing machine produced in 2001 in Germany is designed for cutting aluminium and PVC joinery at a constant 90° angle. In the machining process, the machine uses a reliable circular saw with a diameter of 500 mm, which ensures incredible cutting quality while achieving short work cycles. The material is fed into the workspace on roller conveyors with the option of selecting single, double or triple feeding by means of a special switch. The installed horizontal cylinders further ensure that the process is carried out safely. Until now, the ELUMATEC aluminium sawing machine has only been used to cut aluminium profiles. The total weight of the machine is approximately 800 kg. Technical data of the ELUMATEC SA 142/36 aluminium profile sawing machine - cutting angle: 90° - cutting unit feed length: 650 mm - feed length per work cycle (90° cut): ...

ELUMATEC SA 142/35 automatic circular sawing machine was built in 2001 in Germany. This extremely powerful machine is used for the precise and fully automatic cutting of aluminium and PVC joinery. The workpieces are fed into the workspace on roller conveyors with a option of single, double or triple feeding by means of a special switch. Material infeed is also supported by clamping cylinders, which ensures that the process runs safely and without any interruptions. The material is then cut into the large work space by a reliable circular saw with the option to freely adjust the cutting angle from 90° to 45°. The ELUMATEC aluminium profile sawing machine has so far only been used for cutting aluminium profiles. The total weight of the machine is 770 kg. Technical specifications of the ELUMATEC SA 142/35 aluminium sawing machine - cutting angle: 90° to 45° - maximum cutting uni ...

Description: Machine number: ,1132 107 067 Total drive power: 1.5 kWtotal power requirement: 1,5 kW, weight approx.: 215 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 900 x 1,400 mm ... more information

Semi-automatic Double-sided miter Capacity 240 x 280 mm ... more information

Dimensions: 1150x1500mm  ... more information

Axle:XZ (2-axle) Ø 350 Dimensions: 1800x4400x2000mm  ... more information

Year: 2016 - technically efficient, ready to work - after full service - cutting length: 4000 mm - discs: 500 mm (feed from the rear) - pneumatic inclination of both heads: 90°, 45°, 22.5°, intermediate angles set manually - operator panel with Windows - cooling and lubrication installation for both heads - movable roller feeder - vertical and horizontal pneumatic clamps - automatic disc covers - delivery device for long elements - safety gates

cutting diameter: 320 mmsaw band length: 3990 x 27 x 0,9 mmtable height: 900 mmrotary disc high: 320 mmtable to piston: 320 mmhourly output: 320 x 320 mmcomponent weight: links + rechts 280 mmcomponent weight: links + rechts 280 mmcapacity 30 degrees: round: links + rechts 180 mm: links + rechts 180 mmtotal power requirement: 4 kWweight of the machine ca.: 1300 kgdimensions of the machine ca.: 2200 x 1200 x 2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blade diameter 350 mm Cutting range: cross-section 90° = 430 mm / cutting height at 90° = 135 mm / mitre cut 45° = 300 mm Suction nozzle diameter 100 mm Motor 2 kW, 400 V Weight approx. 100 kg  ... more information

Carbide saw blade 550 mm Three-phase motor 4 HP, 400 V Turning speed of the saw blade 3070 rpm Indirect transmission motor-carbide saw blade Set of integral protective cover for the cutting area Adjustable exit speed of the saw blade Saw blade shaft diameter 32 mm 2 vertical pneum. Tensioning devices with safety check valves and 1 horizontal pneum. Clamping device with swinging movement Operating pressure 7 atm Air consumption 32 NI at 6 atm per duty cycle Micro-drop lubrication of the cut with pure oil Prepared for chip and smoke removal Positioning of the head for all angle settings from 90° to +/- 20° Numeric display with 5 characters incl. aut. Length measuring device = measuring track 5.7 m and roller track 4.6 m Weight of the machine approx. 830 kg

Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - Max. cutting length 6000 mm - Smallest cutting length at 90° + 45° 335 mm - Section area, see diagram attached - Swivel range inwards pneumatically 90 - 22.5 ° - Inward inclination range pneumatic 90 - 45 ° - Saw blade speed 2800 rpm - Drive 400 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per work cycle - without spraying approx. 40 l - with spraying approx. 64 l - Space requirement approx. W 8500 x H 1800 x D 1800 mm - Weight approx. 2100 kg -with: - ELUMATEC E 355 control system - Sawing unit swivel and tiltable for high and wide profiles, - as well as screech cuts possible, can be swivelled inwards 22.5°, - Digital degree display - 2 x suction system fixed + moving along - Separate control cabinet  ...

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. Infinitely variable - Vertical metal clamping - Coolant device - Space requirement approx. W 800 x H 1850 x D 1100 mm - Weight approx. 850 kg - Roller conveyor feed 4000 mm - Discharge – roller conveyor with dimension stop 5000 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Defect ... more information

-Flywheels Ø 1,000 mm, -Cutting capacity rectangular 800 x 850 mm, -Cutting capacity Ø 800 mm, -Belt dimension 54 x 1.6 mm, -max. belt length 9,470 mm, -Carriage stroke 500 mm. Attention! This machine has already been dismantled and is in storage. ... more information

 ... more information

 ... more information

 ... more information